Generated at: 2024-12-11 21:09:33 (CET)

API Overview

Welcome to the Kubernetes API. You can use the Kubernetes API to read and write Kubernetes resource objects via a Kubernetes API endpoint.

Resource Categories

This is a high-level overview of the basic types of resources provide by the Kubernetes API and their primary functions.

Workloads are objects you use to manage and run your containers on the cluster.

Discovery & LB resources are objects you use to "stitch" your workloads together into an externally accessible, load-balanced Service.

Config & Storage resources are objects you use to inject initialization data into your applications, and to persist data that is external to your container.

Cluster resources objects define how the cluster itself is configured; these are typically used only by cluster operators.

Metadata resources are objects you use to configure the behavior of other resources within the cluster, such as HorizontalPodAutoscaler for scaling workloads.

Resource Objects

Resource objects typically have 3 components:

Resource ObjectMeta: This is metadata about the resource, such as its name, type, api version, annotations, and labels. This contains fields that maybe updated both by the end user and the system (e.g. annotations).
ResourceSpec: This is defined by the user and describes the desired state of system. Fill this in when creating or updating an object.
ResourceStatus: This is filled in by the server and reports the current state of the system. In most cases, users don't need to change this.

Resource Operations

Most resources provide the following Operations:

Create

Create operations will create the resource in the storage backend. After a resource is create the system will apply the desired state.

Update

Updates come in 2 forms: Replace and Patch:

Replace: Replacing a resource object will update the resource by replacing the existing spec with the provided one. For read-then-write operations this is safe because an optimistic lock failure will occur if the resource was modified between the read and write. Note: The ResourceStatus will be ignored by the system and will not be updated. To update the status, one must invoke the specific status update operation.
Note: Replacing a resource object may not result immediately in changes being propagated to downstream objects. For instance replacing a ConfigMap or Secret resource will not result in all Pods seeing the changes unless the Pods are restarted out of band.
Patch: Patch will apply a change to a specific field. How the change is merged is defined per field. Lists may either be replaced or merged. Merging lists will not preserve ordering.
Patches will never cause optimistic locking failures, and the last write will win. Patches are recommended when the full state is not read before an update, or when failing on optimistic locking is undesirable. When patching complex types, arrays and maps, how the patch is applied is defined on a per-field basis and may either replace the field's current value, or merge the contents into the current value.

Read

Reads come in 3 forms: Get, List and Watch:

Get: Get will retrieve a specific resource object by name.
List: List will retrieve all resource objects of a specific type within a namespace, and the results can be restricted to resources matching a selector query.
List All Namespaces: Like List but retrieves resources across all namespaces.
Watch: Watch will stream results for an object(s) as it is updated. Similar to a callback, watch is used to respond to resource changes.

Delete

Delete will delete a resource. Depending on the specific resource, child objects may or may not be garbage collected by the server. See notes on specific resource objects for details.

Additional Operations

Resources may define additional operations specific to that resource type.

Rollback: Rollback a PodTemplate to a previous version. Only available for some resource types.
Read / Write Scale: Read or Update the number of replicas for the given resource. Only available for some resource types.
Read / Write Status: Read or Update the Status for a resource object. The Status can only changed through these update operations.

API Groups

The API Groups and their versions are summarized in the following table.

Group	Versions
`admissionregistration.k8s.io`	`v1, v1beta1, v1alpha1`
`apiextensions.k8s.io`	`v1`
`apiregistration.k8s.io`	`v1`
`apps`	`v1`
`authentication.k8s.io`	`v1, v1beta1`
`authorization.k8s.io`	`v1`
`autoscaling`	`v2, v1`
`batch`	`v1`
`certificates.k8s.io`	`v1, v1alpha1`
`coordination.k8s.io`	`v1, v1alpha2`
`core`	`v1`
`discovery.k8s.io`	`v1`
`events.k8s.io`	`v1`
`flowcontrol.apiserver.k8s.io`	`v1`
`internal.apiserver.k8s.io`	`v1alpha1`
`networking.k8s.io`	`v1, v1beta1`
`node.k8s.io`	`v1`
`policy`	`v1`
`rbac.authorization.k8s.io`	`v1`
`resource.k8s.io`	`v1beta1, v1alpha3`
`scheduling.k8s.io`	`v1`
`storage.k8s.io`	`v1, v1beta1, v1alpha1`
`storagemigration.k8s.io`	`v1alpha1`

Workloads

Workloads resources are responsible for managing and running your containers on the cluster. Containers are created by Controllers through Pods. Pods run Containers and provide environmental dependencies such as shared or persistent storage Volumes and Configuration or Secret data injected into the container.

The most common Controllers are:

Deployments for stateless persistent apps (e.g. HTTP servers).
StatefulSets for stateful persistent apps (e.g. databases).
Jobs for run-to-completion apps (e.g. batch Jobs).

Container v1 core

Container Config to run nginx (must be embedded in a PodSpec to run).

name: nginx
# Run the nginx:1.14 image
image: nginx:1.14

Group	Version	Kind
`core`	`v1`	`Container`

Warning:

Containers are only ever created within the context of a Pod. This is usually done using a Controller. See Controllers: Deployment, Job, or StatefulSet

Appears In:

PodSpec [core/v1]

Field	Description
`args` string array	Arguments to the entrypoint. The container image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
`command` string array	Entrypoint array. Not executed within a shell. The container image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
`env` EnvVar array patch strategy: merge patch merge key: name	List of environment variables to set in the container. Cannot be updated.
`envFrom` EnvFromSource array	List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
`image` string	Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.
`imagePullPolicy` string	Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
`lifecycle` Lifecycle	Actions that the management system should take in response to container lifecycle events. Cannot be updated.
`livenessProbe` Probe	Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
`name` string	Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.
`ports` ContainerPort array patch strategy: merge patch merge key: containerPort	List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.
`readinessProbe` Probe	Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
`resizePolicy` ContainerResizePolicy array	Resources resize policy for the container.
`resources` ResourceRequirements	Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
`restartPolicy` string	RestartPolicy defines the restart behavior of individual containers in a pod. This field may only be set for init containers, and the only allowed value is "Always". For non-init containers or when this field is not specified, the restart behavior is defined by the Pod's restart policy and the container type. Setting the RestartPolicy as "Always" for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy "Always" will be shut down. This lifecycle differs from normal init containers and is often referred to as a "sidecar" container. Although this init container still starts in the init container sequence, it does not wait for the container to complete before proceeding to the next init container. Instead, the next init container starts immediately after this init container is started, or after any startupProbe has successfully completed.
`securityContext` SecurityContext	SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
`startupProbe` Probe	StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
`stdin` boolean	Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.
`stdinOnce` boolean	Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
`terminationMessagePath` string	Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
`terminationMessagePolicy` string	Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
`tty` boolean	Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
`volumeDevices` VolumeDevice array patch strategy: merge patch merge key: devicePath	volumeDevices is the list of block devices to be used by the container.
`volumeMounts` VolumeMount array patch strategy: merge patch merge key: mountPath	Pod volumes to mount into the container's filesystem. Cannot be updated.
`workingDir` string	Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.

ContainerStatus v1 core

Appears In:

PodStatus [core/v1]

Field	Description
`allocatedResources` object	AllocatedResources represents the compute resources allocated for this container by the node. Kubelet sets this value to Container.Resources.Requests upon successful pod admission and after successfully admitting desired pod resize.
`allocatedResourcesStatus` ResourceStatus array patch strategy: merge patch merge key: name	AllocatedResourcesStatus represents the status of various resources allocated for this Pod.
`containerID` string	ContainerID is the ID of the container in the format '<type>://<container_id>'. Where type is a container runtime identifier, returned from Version call of CRI API (for example "containerd").
`image` string	Image is the name of container image that the container is running. The container image may not match the image used in the PodSpec, as it may have been resolved by the runtime. More info: https://kubernetes.io/docs/concepts/containers/images.
`imageID` string	ImageID is the image ID of the container's image. The image ID may not match the image ID of the image used in the PodSpec, as it may have been resolved by the runtime.
`lastState` ContainerState	LastTerminationState holds the last termination state of the container to help debug container crashes and restarts. This field is not populated if the container is still running and RestartCount is 0.
`name` string	Name is a DNS_LABEL representing the unique name of the container. Each container in a pod must have a unique name across all container types. Cannot be updated.
`ready` boolean	Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field). The value is typically used to determine whether a container is ready to accept traffic.
`resources` ResourceRequirements	Resources represents the compute resource requests and limits that have been successfully enacted on the running container after it has been started or has been successfully resized.
`restartCount` integer	RestartCount holds the number of times the container has been restarted. Kubelet makes an effort to always increment the value, but there are cases when the state may be lost due to node restarts and then the value may be reset to 0. The value is never negative.
`started` boolean	Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.
`state` ContainerState	State holds details about the container's current condition.
`user` ContainerUser	User represents user identity information initially attached to the first process of the container
`volumeMounts` VolumeMountStatus array patch strategy: merge patch merge key: mountPath	Status of volume mounts.

CronJob v1 batch

Group	Version	Kind
`batch`	`v1`	`CronJob`

Appears In:

CronJobList [batch/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` CronJobSpec	Specification of the desired behavior of a cron job, including the schedule. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` CronJobStatus	Current status of a cron job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

CronJobSpec v1 batch

Appears In:

CronJob [batch/v1]

Field	Description
`concurrencyPolicy` string	Specifies how to treat concurrent executions of a Job. Valid values are: - "Allow" (default): allows CronJobs to run concurrently; - "Forbid": forbids concurrent runs, skipping next run if previous run hasn't finished yet; - "Replace": cancels currently running job and replaces it with a new one
`failedJobsHistoryLimit` integer	The number of failed finished jobs to retain. Value must be non-negative integer. Defaults to 1.
`jobTemplate` JobTemplateSpec	Specifies the job that will be created when executing a CronJob.
`schedule` string	The schedule in Cron format, see https://en.wikipedia.org/wiki/Cron.
`startingDeadlineSeconds` integer	Optional deadline in seconds for starting the job if it misses scheduled time for any reason. Missed jobs executions will be counted as failed ones.
`successfulJobsHistoryLimit` integer	The number of successful finished jobs to retain. Value must be non-negative integer. Defaults to 3.
`suspend` boolean	This flag tells the controller to suspend subsequent executions, it does not apply to already started executions. Defaults to false.
`timeZone` string	The time zone name for the given schedule, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones. If not specified, this will default to the time zone of the kube-controller-manager process. The set of valid time zone names and the time zone offset is loaded from the system-wide time zone database by the API server during CronJob validation and the controller manager during execution. If no system-wide time zone database can be found a bundled version of the database is used instead. If the time zone name becomes invalid during the lifetime of a CronJob or due to a change in host configuration, the controller will stop creating new new Jobs and will create a system event with the reason UnknownTimeZone. More information can be found in https://kubernetes.io/docs/concepts/workloads/controllers/cron-jobs/#time-zones

CronJobStatus v1 batch

Appears In:

CronJob [batch/v1]

Field	Description
`active` ObjectReference array	A list of pointers to currently running jobs.
`lastScheduleTime` Time	Information when was the last time the job was successfully scheduled.
`lastSuccessfulTime` Time	Information when was the last time the job successfully completed.

CronJobList v1 batch

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CronJob array	items is the list of CronJobs.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CronJob

HTTP Request

POST /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CronJob

Response

Code	Description
200 CronJob	OK
201 CronJob	Created
202 CronJob	Accepted

Patch

partially update the specified CronJob

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CronJob	OK
201 CronJob	Created

Replace

replace the specified CronJob

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CronJob

Response

Code	Description
200 CronJob	OK
201 CronJob	Created

Delete

delete a CronJob

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of CronJob

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CronJob	OK

List

list or watch objects of kind CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CronJobList	OK

List All Namespaces

list or watch objects of kind CronJob

HTTP Request

GET /apis/batch/v1/cronjobs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CronJobList	OK

Watch

watch changes to an object of kind CronJob. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/cronjobs/{name}

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CronJob. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/cronjobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of CronJob. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/cronjobs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified CronJob

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CronJob	OK
201 CronJob	Created

Read Status

read status of the specified CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CronJob	OK

Replace Status

replace status of the specified CronJob

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CronJob
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CronJob

Response

Code	Description
200 CronJob	OK
201 CronJob	Created

DaemonSet v1 apps

DaemonSet Config to print the `hostname` on each Node in the cluster every 10 seconds.

apiVersion: apps/v1
kind: DaemonSet
metadata:
  # Unique key of the DaemonSet instance
  name: daemonset-example
spec:
  selector:
    matchLabels:
      app: daemonset-example
  template:
    metadata:
      labels:
        app: daemonset-example
    spec:
      containers:
      # This container is run once on each Node in the cluster
      - name: daemonset-example
        image: ubuntu:trusty
        command:
        - /bin/sh
        args:
        - -c
        # This script is run through `sh -c <script>`
        - >-
          while [ true ]; do
          echo "DaemonSet running on $(hostname)" ;
          sleep 10 ;
          done

Group	Version	Kind
`apps`	`v1`	`DaemonSet`

Appears In:

DaemonSetList [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` DaemonSetSpec	The desired behavior of this daemon set. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` DaemonSetStatus	The current status of this daemon set. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

DaemonSetSpec v1 apps

Appears In:

DaemonSet [apps/v1]

Field	Description
`minReadySeconds` integer	The minimum number of seconds for which a newly created DaemonSet pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready).
`revisionHistoryLimit` integer	The number of old history to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.
`selector` LabelSelector	A label query over pods that are managed by the daemon set. Must match in order to be controlled. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
`template` PodTemplateSpec	An object that describes the pod that will be created. The DaemonSet will create exactly one copy of this pod on every node that matches the template's node selector (or on every node if no node selector is specified). The only allowed template.spec.restartPolicy value is "Always". More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template
`updateStrategy` DaemonSetUpdateStrategy	An update strategy to replace existing DaemonSet pods with new pods.

DaemonSetStatus v1 apps

Appears In:

DaemonSet [apps/v1]

Field	Description
`collisionCount` integer	Count of hash collisions for the DaemonSet. The DaemonSet controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ControllerRevision.
`conditions` DaemonSetCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a DaemonSet's current state.
`currentNumberScheduled` integer	The number of nodes that are running at least 1 daemon pod and are supposed to run the daemon pod. More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
`desiredNumberScheduled` integer	The total number of nodes that should be running the daemon pod (including nodes correctly running the daemon pod). More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
`numberAvailable` integer	The number of nodes that should be running the daemon pod and have one or more of the daemon pod running and available (ready for at least spec.minReadySeconds)
`numberMisscheduled` integer	The number of nodes that are running the daemon pod, but are not supposed to run the daemon pod. More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
`numberReady` integer	numberReady is the number of nodes that should be running the daemon pod and have one or more of the daemon pod running with a Ready Condition.
`numberUnavailable` integer	The number of nodes that should be running the daemon pod and have none of the daemon pod running and available (ready for at least spec.minReadySeconds)
`observedGeneration` integer	The most recent generation observed by the daemon set controller.
`updatedNumberScheduled` integer	The total number of nodes that are running updated daemon pod

DaemonSetList v1 apps

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` DaemonSet array	A list of daemon sets.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

RollingUpdateDaemonSet v1 apps

Appears In:

DaemonSetUpdateStrategy [apps/v1]

Field Description

maxSurge The maximum number of nodes with an existing available DaemonSet pod that can have an updated DaemonSet pod during during an update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up to a minimum of 1. Default value is 0. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their a new pod created before the old pod is marked as deleted. The update starts by launching new pods on 30% of nodes. Once an updated pod is available (Ready for at least minReadySeconds) the old DaemonSet pod on that node is marked deleted. If the old pod becomes unavailable for any reason (Ready transitions to false, is evicted, or is drained) an updated pod is immediatedly created on that node without considering surge limits. Allowing surge implies the possibility that the resources consumed by the daemonset on any given node can double if the readiness check fails, and so resource intensive daemonsets should take into account that they may cause evictions during disruption.

maxUnavailable The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0 if MaxSurge is 0 Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update.

Write Operations

Create

create a DaemonSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DaemonSet

Response

Code	Description
200 DaemonSet	OK
201 DaemonSet	Created
202 DaemonSet	Accepted

Patch

partially update the specified DaemonSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 DaemonSet	OK
201 DaemonSet	Created

Replace

replace the specified DaemonSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DaemonSet

Response

Code	Description
200 DaemonSet	OK
201 DaemonSet	Created

Delete

delete a DaemonSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of DaemonSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 DaemonSet	OK

List

list or watch objects of kind DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DaemonSetList	OK

List All Namespaces

list or watch objects of kind DaemonSet

HTTP Request

GET /apis/apps/v1/daemonsets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DaemonSetList	OK

Watch

watch changes to an object of kind DaemonSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/daemonsets/{name}

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of DaemonSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/daemonsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of DaemonSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/daemonsets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified DaemonSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 DaemonSet	OK
201 DaemonSet	Created

Read Status

read status of the specified DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 DaemonSet	OK

Replace Status

replace status of the specified DaemonSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the DaemonSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DaemonSet

Response

Code	Description
200 DaemonSet	OK
201 DaemonSet	Created

Deployment v1 apps

Deployment Config to run 3 nginx instances (max rollback set to 10 revisions).

apiVersion: apps/v1
kind: Deployment
metadata:
  # Unique key of the Deployment instance
  name: deployment-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        # Apply this label to pods and default
        # the Deployment label selector to this value
        app: nginx
    spec:
      containers:
      - name: nginx
        # Run this image
        image: nginx:1.14

Group	Version	Kind
`apps`	`v1`	`Deployment`

Appears In:

DeploymentList [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` DeploymentSpec	Specification of the desired behavior of the Deployment.
`status` DeploymentStatus	Most recently observed status of the Deployment.

DeploymentSpec v1 apps

Appears In:

Deployment [apps/v1]

Field	Description
`minReadySeconds` integer	Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
`paused` boolean	Indicates that the deployment is paused.
`progressDeadlineSeconds` integer	The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.
`replicas` integer	Number of desired pods. This is a pointer to distinguish between explicit zero and not specified. Defaults to 1.
`revisionHistoryLimit` integer	The number of old ReplicaSets to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.
`selector` LabelSelector	Label selector for pods. Existing ReplicaSets whose pods are selected by this will be the ones affected by this deployment. It must match the pod template's labels.
`strategy` DeploymentStrategy patch strategy: retainKeys	The deployment strategy to use to replace existing pods with new ones.
`template` PodTemplateSpec	Template describes the pods that will be created. The only allowed template.spec.restartPolicy value is "Always".

DeploymentStatus v1 apps

Appears In:

Deployment [apps/v1]

Field	Description
`availableReplicas` integer	Total number of available pods (ready for at least minReadySeconds) targeted by this deployment.
`collisionCount` integer	Count of hash collisions for the Deployment. The Deployment controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ReplicaSet.
`conditions` DeploymentCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a deployment's current state.
`observedGeneration` integer	The generation observed by the deployment controller.
`readyReplicas` integer	readyReplicas is the number of pods targeted by this Deployment with a Ready Condition.
`replicas` integer	Total number of non-terminated pods targeted by this deployment (their labels match the selector).
`unavailableReplicas` integer	Total number of unavailable pods targeted by this deployment. This is the total number of pods that are still required for the deployment to have 100% available capacity. They may either be pods that are running but not yet available or pods that still have not been created.
`updatedReplicas` integer	Total number of non-terminated pods targeted by this deployment that have the desired template spec.

DeploymentList v1 apps

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Deployment array	Items is the list of Deployments.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata.

DeploymentStrategy v1 apps

Appears In:

DeploymentSpec [apps/v1]

Field	Description
`rollingUpdate` RollingUpdateDeployment	Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate.
`type` string	Type of deployment. Can be "Recreate" or "RollingUpdate". Default is RollingUpdate.

RollingUpdateDeployment v1 apps

Appears In:

DeploymentStrategy [apps/v1]

Field Description

maxSurge The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.

maxUnavailable The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.

Write Operations

Create

create a Deployment

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Deployment

Response

Code	Description
200 Deployment	OK
201 Deployment	Created
202 Deployment	Accepted

Patch

partially update the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Deployment	OK
201 Deployment	Created

Replace

replace the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Deployment

Response

Code	Description
200 Deployment	OK
201 Deployment	Created

Delete

delete a Deployment

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Deployment

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Deployment	OK

List

list or watch objects of kind Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DeploymentList	OK

List All Namespaces

list or watch objects of kind Deployment

HTTP Request

GET /apis/apps/v1/deployments

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DeploymentList	OK

Watch

watch changes to an object of kind Deployment. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/deployments/{name}

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Deployment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/deployments

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Deployment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/deployments

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Deployment	OK
201 Deployment	Created

Read Status

read status of the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Deployment	OK

Replace Status

replace status of the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Deployment
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Deployment

Response

Code	Description
200 Deployment	OK
201 Deployment	Created

Misc Operations

Read Scale

read scale of the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Scale	OK

Replace Scale

replace scale of the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Scale

Response

Code	Description
200 Scale	OK
201 Scale	Created

Patch Scale

partially update scale of the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Scale	OK
201 Scale	Created

Job v1 batch

Job Config to print pi up to 2000 digits (then exit).

apiVersion: batch/v1
kind: Job
metadata:
  # Unique key of the Job instance
  name: example-job
spec:
  template:
    metadata:
      name: example-job
    spec:
      containers:
      - name: pi
        image: perl
        command: ["perl"]
        args: ["-Mbignum=bpi", "-wle", "print bpi(2000)"]
      # Do not restart containers after they exit
      restartPolicy: Never

Group	Version	Kind
`batch`	`v1`	`Job`

Appears In:

JobList [batch/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` JobSpec	Specification of the desired behavior of a job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` JobStatus	Current status of a job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

JobSpec v1 batch

Appears In:

Job [batch/v1]
JobTemplateSpec [batch/v1]

Field	Description
`activeDeadlineSeconds` integer	Specifies the duration in seconds relative to the startTime that the job may be continuously active before the system tries to terminate it; value must be positive integer. If a Job is suspended (at creation or through an update), this timer will effectively be stopped and reset when the Job is resumed again.
`backoffLimit` integer	Specifies the number of retries before marking this job failed. Defaults to 6
`backoffLimitPerIndex` integer	Specifies the limit for the number of retries within an index before marking this index as failed. When enabled the number of failures per index is kept in the pod's batch.kubernetes.io/job-index-failure-count annotation. It can only be set when Job's completionMode=Indexed, and the Pod's restart policy is Never. The field is immutable. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
`completionMode` string	completionMode specifies how Pod completions are tracked. It can be `NonIndexed` (default) or `Indexed`. `NonIndexed` means that the Job is considered complete when there have been .spec.completions successfully completed Pods. Each Pod completion is homologous to each other. `Indexed` means that the Pods of a Job get an associated completion index from 0 to (.spec.completions - 1), available in the annotation batch.kubernetes.io/job-completion-index. The Job is considered complete when there is one successfully completed Pod for each index. When value is `Indexed`, .spec.completions must be specified and `.spec.parallelism` must be less than or equal to 10^5. In addition, The Pod name takes the form `$(job-name)-$(index)-$(random-string)`, the Pod hostname takes the form `$(job-name)-$(index)`. More completion modes can be added in the future. If the Job controller observes a mode that it doesn't recognize, which is possible during upgrades due to version skew, the controller skips updates for the Job.
`completions` integer	Specifies the desired number of successfully finished pods the job should be run with. Setting to null means that the success of any pod signals the success of all pods, and allows parallelism to have any positive value. Setting to 1 means that parallelism is limited to 1 and the success of that pod signals the success of the job. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
`managedBy` string	ManagedBy field indicates the controller that manages a Job. The k8s Job controller reconciles jobs which don't have this field at all or the field value is the reserved string `kubernetes.io/job-controller`, but skips reconciling Jobs with a custom value for this field. The value must be a valid domain-prefixed path (e.g. acme.io/foo) - all characters before the first "/" must be a valid subdomain as defined by RFC 1123. All characters trailing the first "/" must be valid HTTP Path characters as defined by RFC 3986. The value cannot exceed 63 characters. This field is immutable. This field is beta-level. The job controller accepts setting the field when the feature gate JobManagedBy is enabled (enabled by default).
`manualSelector` boolean	manualSelector controls generation of pod labels and pod selectors. Leave `manualSelector` unset unless you are certain what you are doing. When false or unset, the system pick labels unique to this job and appends those labels to the pod template. When true, the user is responsible for picking unique labels and specifying the selector. Failure to pick a unique label may cause this and other jobs to not function correctly. However, You may see `manualSelector=true` in jobs that were created with the old `extensions/v1beta1` API. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/#specifying-your-own-pod-selector
`maxFailedIndexes` integer	Specifies the maximal number of failed indexes before marking the Job as failed, when backoffLimitPerIndex is set. Once the number of failed indexes exceeds this number the entire Job is marked as Failed and its execution is terminated. When left as null the job continues execution of all of its indexes and is marked with the `Complete` Job condition. It can only be specified when backoffLimitPerIndex is set. It can be null or up to completions. It is required and must be less than or equal to 10^4 when is completions greater than 10^5. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
`parallelism` integer	Specifies the maximum desired number of pods the job should run at any given time. The actual number of pods running in steady state will be less than this number when ((.spec.completions - .status.successful) < .spec.parallelism), i.e. when the work left to do is less than max parallelism. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
`podFailurePolicy` PodFailurePolicy	Specifies the policy of handling failed pods. In particular, it allows to specify the set of actions and conditions which need to be satisfied to take the associated action. If empty, the default behaviour applies - the counter of failed pods, represented by the jobs's .status.failed field, is incremented and it is checked against the backoffLimit. This field cannot be used in combination with restartPolicy=OnFailure.
`podReplacementPolicy` string	podReplacementPolicy specifies when to create replacement Pods. Possible values are: - TerminatingOrFailed means that we recreate pods when they are terminating (has a metadata.deletionTimestamp) or failed. - Failed means to wait until a previously created Pod is fully terminated (has phase Failed or Succeeded) before creating a replacement Pod. When using podFailurePolicy, Failed is the the only allowed value. TerminatingOrFailed and Failed are allowed values when podFailurePolicy is not in use. This is an beta field. To use this, enable the JobPodReplacementPolicy feature toggle. This is on by default.
`selector` LabelSelector	A label query over pods that should match the pod count. Normally, the system sets this field for you. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
`successPolicy` SuccessPolicy	successPolicy specifies the policy when the Job can be declared as succeeded. If empty, the default behavior applies - the Job is declared as succeeded only when the number of succeeded pods equals to the completions. When the field is specified, it must be immutable and works only for the Indexed Jobs. Once the Job meets the SuccessPolicy, the lingering pods are terminated. This field is beta-level. To use this field, you must enable the `JobSuccessPolicy` feature gate (enabled by default).
`suspend` boolean	suspend specifies whether the Job controller should create Pods or not. If a Job is created with suspend set to true, no Pods are created by the Job controller. If a Job is suspended after creation (i.e. the flag goes from false to true), the Job controller will delete all active Pods associated with this Job. Users must design their workload to gracefully handle this. Suspending a Job will reset the StartTime field of the Job, effectively resetting the ActiveDeadlineSeconds timer too. Defaults to false.
`template` PodTemplateSpec	Describes the pod that will be created when executing a job. The only allowed template.spec.restartPolicy values are "Never" or "OnFailure". More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
`ttlSecondsAfterFinished` integer	ttlSecondsAfterFinished limits the lifetime of a Job that has finished execution (either Complete or Failed). If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to be automatically deleted. When the Job is being deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is unset, the Job won't be automatically deleted. If this field is set to zero, the Job becomes eligible to be deleted immediately after it finishes.

JobStatus v1 batch

Appears In:

Job [batch/v1]

Field	Description
`active` integer	The number of pending and running pods which are not terminating (without a deletionTimestamp). The value is zero for finished jobs.
`completedIndexes` string	completedIndexes holds the completed indexes when .spec.completionMode = "Indexed" in a text format. The indexes are represented as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7".
`completionTime` Time	Represents time when the job was completed. It is not guaranteed to be set in happens-before order across separate operations. It is represented in RFC3339 form and is in UTC. The completion time is set when the job finishes successfully, and only then. The value cannot be updated or removed. The value indicates the same or later point in time as the startTime field.
`conditions` JobCondition array patch strategy: merge patch merge key: type	The latest available observations of an object's current state. When a Job fails, one of the conditions will have type "Failed" and status true. When a Job is suspended, one of the conditions will have type "Suspended" and status true; when the Job is resumed, the status of this condition will become false. When a Job is completed, one of the conditions will have type "Complete" and status true. A job is considered finished when it is in a terminal condition, either "Complete" or "Failed". A Job cannot have both the "Complete" and "Failed" conditions. Additionally, it cannot be in the "Complete" and "FailureTarget" conditions. The "Complete", "Failed" and "FailureTarget" conditions cannot be disabled. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
`failed` integer	The number of pods which reached phase Failed. The value increases monotonically.
`failedIndexes` string	FailedIndexes holds the failed indexes when spec.backoffLimitPerIndex is set. The indexes are represented in the text format analogous as for the `completedIndexes` field, ie. they are kept as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the failed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". The set of failed indexes cannot overlap with the set of completed indexes. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
`ready` integer	The number of active pods which have a Ready condition and are not terminating (without a deletionTimestamp).
`startTime` Time	Represents time when the job controller started processing a job. When a Job is created in the suspended state, this field is not set until the first time it is resumed. This field is reset every time a Job is resumed from suspension. It is represented in RFC3339 form and is in UTC. Once set, the field can only be removed when the job is suspended. The field cannot be modified while the job is unsuspended or finished.
`succeeded` integer	The number of pods which reached phase Succeeded. The value increases monotonically for a given spec. However, it may decrease in reaction to scale down of elastic indexed jobs.
`terminating` integer	The number of pods which are terminating (in phase Pending or Running and have a deletionTimestamp). This field is beta-level. The job controller populates the field when the feature gate JobPodReplacementPolicy is enabled (enabled by default).
`uncountedTerminatedPods` UncountedTerminatedPods	uncountedTerminatedPods holds the UIDs of Pods that have terminated but the job controller hasn't yet accounted for in the status counters. The job controller creates pods with a finalizer. When a pod terminates (succeeded or failed), the controller does three steps to account for it in the job status: 1. Add the pod UID to the arrays in this field. 2. Remove the pod finalizer. 3. Remove the pod UID from the arrays while increasing the corresponding counter. Old jobs might not be tracked using this field, in which case the field remains null. The structure is empty for finished jobs.

JobList v1 batch

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Job array	items is the list of Jobs.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a Job

HTTP Request

POST /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Job

Response

Code	Description
200 Job	OK
201 Job	Created
202 Job	Accepted

Patch

partially update the specified Job

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Job	OK
201 Job	Created

Replace

replace the specified Job

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Job

Response

Code	Description
200 Job	OK
201 Job	Created

Delete

delete a Job

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Job

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Job	OK

List

list or watch objects of kind Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 JobList	OK

List All Namespaces

list or watch objects of kind Job

HTTP Request

GET /apis/batch/v1/jobs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 JobList	OK

Watch

watch changes to an object of kind Job. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/jobs/{name}

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Job. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/jobs

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Job. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/jobs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Job

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Job	OK
201 Job	Created

Read Status

read status of the specified Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Job	OK

Replace Status

replace status of the specified Job

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Job
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Job

Response

Code	Description
200 Job	OK
201 Job	Created

Pod v1 core

Pod Config to print "Hello World".

apiVersion: v1
kind: Pod
metadata:
  name: pod-example
spec:
  containers:
  - name: ubuntu
    image: ubuntu:trusty
    command: ["echo"]
    args: ["Hello World"]

Group	Version	Kind
`core`	`v1`	`Pod`

Warning:

It is recommended that users create Pods only through a Controller, and not directly. See Controllers: Deployment, Job, or StatefulSet.

Appears In:

PodList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PodSpec	Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` PodStatus	Most recently observed status of the pod. This data may not be up to date. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodSpec v1 core

Appears In:

Pod [core/v1]
PodTemplateSpec [core/v1]

Field	Description
`activeDeadlineSeconds` integer	Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer.
`affinity` Affinity	If specified, the pod's scheduling constraints
`automountServiceAccountToken` boolean	AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.
`containers` Container array patch strategy: merge patch merge key: name	List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.
`dnsConfig` PodDNSConfig	Specifies the DNS parameters of a pod. Parameters specified here will be merged to the generated DNS configuration based on DNSPolicy.
`dnsPolicy` string	Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.
`enableServiceLinks` boolean	EnableServiceLinks indicates whether information about services should be injected into pod's environment variables, matching the syntax of Docker links. Optional: Defaults to true.
`ephemeralContainers` EphemeralContainer array patch strategy: merge patch merge key: name	List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource.
`hostAliases` HostAlias array patch strategy: merge patch merge key: ip	HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts file if specified.
`hostIPC` boolean	Use the host's ipc namespace. Optional: Default to false.
`hostNetwork` boolean	Host networking requested for this pod. Use the host's network namespace. If this option is set, the ports that will be used must be specified. Default to false.
`hostPID` boolean	Use the host's pid namespace. Optional: Default to false.
`hostUsers` boolean	Use the host's user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.
`hostname` string	Specifies the hostname of the Pod If not specified, the pod's hostname will be set to a system-defined value.
`imagePullSecrets` LocalObjectReference array patch strategy: merge patch merge key: name	ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod
`initContainers` Container array patch strategy: merge patch merge key: name	List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
`nodeName` string	NodeName indicates in which node this pod is scheduled. If empty, this pod is a candidate for scheduling by the scheduler defined in schedulerName. Once this field is set, the kubelet for this node becomes responsible for the lifecycle of this pod. This field should not be used to express a desire for the pod to be scheduled on a specific node. https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodename
`nodeSelector` object	NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node's labels for the pod to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
`os` PodOS	Specifies the OS of the containers in the pod. Some pod and container fields are restricted if this is set. If the OS field is set to linux, the following fields must be unset: -securityContext.windowsOptions If the OS field is set to windows, following fields must be unset: - spec.hostPID - spec.hostIPC - spec.hostUsers - spec.securityContext.appArmorProfile - spec.securityContext.seLinuxOptions - spec.securityContext.seccompProfile - spec.securityContext.fsGroup - spec.securityContext.fsGroupChangePolicy - spec.securityContext.sysctls - spec.shareProcessNamespace - spec.securityContext.runAsUser - spec.securityContext.runAsGroup - spec.securityContext.supplementalGroups - spec.securityContext.supplementalGroupsPolicy - spec.containers[].securityContext.appArmorProfile - spec.containers[].securityContext.seLinuxOptions - spec.containers[].securityContext.seccompProfile - spec.containers[].securityContext.capabilities - spec.containers[].securityContext.readOnlyRootFilesystem - spec.containers[].securityContext.privileged - spec.containers[].securityContext.allowPrivilegeEscalation - spec.containers[].securityContext.procMount - spec.containers[].securityContext.runAsUser - spec.containers[].securityContext.runAsGroup
`overhead` object	Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md
`preemptionPolicy` string	PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.
`priority` integer	The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority.
`priorityClassName` string	If specified, indicates the pod's priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.
`readinessGates` PodReadinessGate array	If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates
`resourceClaims` PodResourceClaim array patch strategy: merge,retainKeys patch merge key: name	ResourceClaims defines which ResourceClaims must be allocated and reserved before the Pod is allowed to start. The resources will be made available to those containers which consume them by name. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable.
`resources` ResourceRequirements	Resources is the total amount of CPU and Memory resources required by all containers in the pod. It supports specifying Requests and Limits for "cpu" and "memory" resource names only. ResourceClaims are not supported. This field enables fine-grained control over resource allocation for the entire pod, allowing resource sharing among containers in a pod. This is an alpha field and requires enabling the PodLevelResources feature gate.
`restartPolicy` string	Restart policy for all containers within the pod. One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. Default to Always. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy
`runtimeClassName` string	RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class
`schedulerName` string	If specified, the pod will be dispatched by specified scheduler. If not specified, the pod will be dispatched by default scheduler.
`schedulingGates` PodSchedulingGate array patch strategy: merge patch merge key: name	SchedulingGates is an opaque list of values that if specified will block scheduling the pod. If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the scheduler will not attempt to schedule the pod. SchedulingGates can only be set at pod creation time, and be removed only afterwards.
`securityContext` PodSecurityContext	SecurityContext holds pod-level security attributes and common container settings. Optional: Defaults to empty. See type description for default values of each field.
`serviceAccount` string	DeprecatedServiceAccount is a deprecated alias for ServiceAccountName. Deprecated: Use serviceAccountName instead.
`serviceAccountName` string	ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
`setHostnameAsFQDN` boolean	If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false.
`shareProcessNamespace` boolean	Share a single process namespace between all of the containers in a pod. When this is set containers will be able to view and signal processes from other containers in the same pod, and the first process in each container will not be assigned PID 1. HostPID and ShareProcessNamespace cannot both be set. Optional: Default to false.
`subdomain` string	If specified, the fully qualified Pod hostname will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>". If not specified, the pod will not have a domainname at all.
`terminationGracePeriodSeconds` integer	Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds.
`tolerations` Toleration array	If specified, the pod's tolerations.
`topologySpreadConstraints` TopologySpreadConstraint array patch strategy: merge patch merge key: topologyKey	TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed.
`volumes` Volume array patch strategy: merge,retainKeys patch merge key: name	List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes

PodStatus v1 core

Appears In:

Pod [core/v1]

Field	Description
`conditions` PodCondition array patch strategy: merge patch merge key: type	Current service state of pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
`containerStatuses` ContainerStatus array	Statuses of containers in this pod. Each container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status
`ephemeralContainerStatuses` ContainerStatus array	Statuses for any ephemeral containers that have run in this pod. Each ephemeral container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status
`hostIP` string	hostIP holds the IP address of the host to which the pod is assigned. Empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns mean that HostIP will not be updated even if there is a node is assigned to pod
`hostIPs` HostIP array patch strategy: merge patch merge key: ip	hostIPs holds the IP addresses allocated to the host. If this field is specified, the first entry must match the hostIP field. This list is empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns means that HostIPs will not be updated even if there is a node is assigned to this pod.
`initContainerStatuses` ContainerStatus array	Statuses of init containers in this pod. The most recent successful non-restartable init container will have ready = true, the most recently started container will have startTime set. Each init container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-and-container-status
`message` string	A human readable message indicating details about why the pod is in this condition.
`nominatedNodeName` string	nominatedNodeName is set only when this pod preempts other pods on the node, but it cannot be scheduled right away as preemption victims receive their graceful termination periods. This field does not guarantee that the pod will be scheduled on this node. Scheduler may decide to place the pod elsewhere if other nodes become available sooner. Scheduler may also decide to give the resources on this node to a higher priority pod that is created after preemption. As a result, this field may be different than PodSpec.nodeName when the pod is scheduled.
`phase` string	The phase of a Pod is a simple, high-level summary of where the Pod is in its lifecycle. The conditions array, the reason and message fields, and the individual container status arrays contain more detail about the pod's status. There are five possible phase values: Pending: The pod has been accepted by the Kubernetes system, but one or more of the container images has not been created. This includes time before being scheduled as well as time spent downloading images over the network, which could take a while. Running: The pod has been bound to a node, and all of the containers have been created. At least one container is still running, or is in the process of starting or restarting. Succeeded: All containers in the pod have terminated in success, and will not be restarted. Failed: All containers in the pod have terminated, and at least one container has terminated in failure. The container either exited with non-zero status or was terminated by the system. Unknown: For some reason the state of the pod could not be obtained, typically due to an error in communicating with the host of the pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-phase
`podIP` string	podIP address allocated to the pod. Routable at least within the cluster. Empty if not yet allocated.
`podIPs` PodIP array patch strategy: merge patch merge key: ip	podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list is empty if no IPs have been allocated yet.
`qosClass` string	The Quality of Service (QOS) classification assigned to the pod based on resource requirements See PodQOSClass type for available QOS classes More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-qos/#quality-of-service-classes
`reason` string	A brief CamelCase message indicating details about why the pod is in this state. e.g. 'Evicted'
`resize` string	Status of resources resize desired for pod's containers. It is empty if no resources resize is pending. Any changes to container resources will automatically set this to "Proposed"
`resourceClaimStatuses` PodResourceClaimStatus array patch strategy: merge,retainKeys patch merge key: name	Status of resource claims.
`startTime` Time	RFC 3339 date and time at which the object was acknowledged by the Kubelet. This is before the Kubelet pulled the container image(s) for the pod.

PodList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Pod array	List of pods. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Pod

Response

Code	Description
200 Pod	OK
201 Pod	Created
202 Pod	Accepted

Create Eviction

create eviction of a Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/eviction

Path Parameters

Parameter	Description
`name`	name of the Eviction
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Eviction

Response

Code	Description
200 Eviction	OK
201 Eviction	Created
202 Eviction	Accepted

Patch

partially update the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Pod	OK
201 Pod	Created

Replace

replace the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Pod

Response

Code	Description
200 Pod	OK
201 Pod	Created

Delete

delete a Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Pod	OK
202 Pod	Accepted

Delete Collection

delete collection of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Pod	OK

List

list or watch objects of kind Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodList	OK

List All Namespaces

list or watch objects of kind Pod

HTTP Request

GET /api/v1/pods

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodList	OK

Watch

watch changes to an object of kind Pod. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/pods/{name}

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/pods

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/pods

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Pod	OK
201 Pod	Created

Read Status

read status of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Pod	OK

Replace Status

replace status of the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Pod

Response

Code	Description
200 Pod	OK
201 Pod	Created

EphemeralContainers Operations

Patch EphemeralContainers

partially update ephemeralcontainers of the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Pod	OK
201 Pod	Created

Read EphemeralContainers

read ephemeralcontainers of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Pod	OK

Replace EphemeralContainers

replace ephemeralcontainers of the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Pod

Response

Code	Description
200 Pod	OK
201 Pod	Created

Proxy Operations

Create Connect Portforward

connect POST requests to portforward of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/portforward

Path Parameters

Parameter	Description
`name`	name of the PodPortForwardOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`ports`	List of ports to forward Required when using WebSockets

Response

Code	Description
200 string	OK

Create Connect Proxy

connect POST requests to proxy of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Create Connect Proxy Path

connect POST requests to proxy of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Delete Connect Proxy

connect DELETE requests to proxy of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Get Connect Portforward

connect GET requests to portforward of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/portforward

Path Parameters

Parameter	Description
`name`	name of the PodPortForwardOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`ports`	List of ports to forward Required when using WebSockets

Response

Code	Description
200 string	OK

Get Connect Proxy

connect GET requests to proxy of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Get Connect Proxy Path

connect GET requests to proxy of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Head Connect Proxy

connect HEAD requests to proxy of Pod

HTTP Request

HEAD /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Head Connect Proxy Path

connect HEAD requests to proxy of Pod

HTTP Request

HEAD /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Replace Connect Proxy

connect PUT requests to proxy of Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Replace Connect Proxy Path

connect PUT requests to proxy of Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the PodProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to pod.

Response

Code	Description
200 string	OK

Misc Operations

Read Log

read log of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/log

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`container`	The container for which to stream logs. Defaults to only container if there is one container in the pod.
`follow`	Follow the log stream of the pod. Defaults to false.
`insecureSkipTLSVerifyBackend`	insecureSkipTLSVerifyBackend indicates that the apiserver should not confirm the validity of the serving certificate of the backend it is connecting to. This will make the HTTPS connection between the apiserver and the backend insecure. This means the apiserver cannot verify the log data it is receiving came from the real kubelet. If the kubelet is configured to verify the apiserver's TLS credentials, it does not mean the connection to the real kubelet is vulnerable to a man in the middle attack (e.g. an attacker could not intercept the actual log data coming from the real kubelet).
`limitBytes`	If set, the number of bytes to read from the server before terminating the log output. This may not display a complete final line of logging, and may return slightly more or slightly less than the specified limit.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`previous`	Return previous terminated container logs. Defaults to false.
`sinceSeconds`	A relative time in seconds before the current time from which to show logs. If this value precedes the time a pod was started, only logs since the pod start will be returned. If this value is in the future, no logs will be returned. Only one of sinceSeconds or sinceTime may be specified.
`stream`	Specify which container log stream to return to the client. Acceptable values are "All", "Stdout" and "Stderr". If not specified, "All" is used, and both stdout and stderr are returned interleaved. Note that when "TailLines" is specified, "Stream" can only be set to nil or "All".
`tailLines`	If set, the number of lines from the end of the logs to show. If not specified, logs are shown from the creation of the container or sinceSeconds or sinceTime. Note that when "TailLines" is specified, "Stream" can only be set to nil or "All".
`timestamps`	If true, add an RFC3339 or RFC3339Nano timestamp at the beginning of every line of log output. Defaults to false.

Response

Code	Description
200 string	OK

Get Connect Exec

connect GET requests to exec of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/exec

Path Parameters

Parameter	Description
`name`	name of the PodExecOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`command`	Command is the remote command to execute. argv array. Not executed within a shell.
`container`	Container in which to execute the command. Defaults to only container if there is only one container in the pod.
`stderr`	Redirect the standard error stream of the pod for this call.
`stdin`	Redirect the standard input stream of the pod for this call. Defaults to false.
`stdout`	Redirect the standard output stream of the pod for this call.
`tty`	TTY if true indicates that a tty will be allocated for the exec call. Defaults to false.

Response

Code	Description
200 string	OK

Create Connect Exec

connect POST requests to exec of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/exec

Path Parameters

Parameter	Description
`name`	name of the PodExecOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`command`	Command is the remote command to execute. argv array. Not executed within a shell.
`container`	Container in which to execute the command. Defaults to only container if there is only one container in the pod.
`stderr`	Redirect the standard error stream of the pod for this call.
`stdin`	Redirect the standard input stream of the pod for this call. Defaults to false.
`stdout`	Redirect the standard output stream of the pod for this call.
`tty`	TTY if true indicates that a tty will be allocated for the exec call. Defaults to false.

Response

Code	Description
200 string	OK

Get Connect Attach

connect GET requests to attach of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/attach

Path Parameters

Parameter	Description
`name`	name of the PodAttachOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`container`	The container in which to execute the command. Defaults to only container if there is only one container in the pod.
`stderr`	Stderr if true indicates that stderr is to be redirected for the attach call. Defaults to true.
`stdin`	Stdin if true, redirects the standard input stream of the pod for this call. Defaults to false.
`stdout`	Stdout if true indicates that stdout is to be redirected for the attach call. Defaults to true.
`tty`	TTY if true indicates that a tty will be allocated for the attach call. This is passed through the container runtime so the tty is allocated on the worker node by the container runtime. Defaults to false.

Response

Code	Description
200 string	OK

Create Connect Attach

connect POST requests to attach of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/attach

Path Parameters

Parameter	Description
`name`	name of the PodAttachOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`container`	The container in which to execute the command. Defaults to only container if there is only one container in the pod.
`stderr`	Stderr if true indicates that stderr is to be redirected for the attach call. Defaults to true.
`stdin`	Stdin if true, redirects the standard input stream of the pod for this call. Defaults to false.
`stdout`	Stdout if true indicates that stdout is to be redirected for the attach call. Defaults to true.
`tty`	TTY if true indicates that a tty will be allocated for the attach call. This is passed through the container runtime so the tty is allocated on the worker node by the container runtime. Defaults to false.

Response

Code	Description
200 string	OK

ReplicaSet v1 apps

ReplicaSet Config to run 3 nginx instances.

apiVersion: apps/v1
kind: ReplicaSet
metadata:
  # Unique key of the ReplicaSet instance
  name: replicaset-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      # Run the nginx image
      - name: nginx
        image: nginx:1.14

Group	Version	Kind
`apps`	`v1`	`ReplicaSet`

Warning:

In many cases it is recommended to create a Deployment instead of ReplicaSet.

Appears In:

ReplicaSetList [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	If the Labels of a ReplicaSet are empty, they are defaulted to be the same as the Pod(s) that the ReplicaSet manages. Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` ReplicaSetSpec	Spec defines the specification of the desired behavior of the ReplicaSet. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` ReplicaSetStatus	Status is the most recently observed status of the ReplicaSet. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ReplicaSetSpec v1 apps

Appears In:

ReplicaSet [apps/v1]

Field	Description
`minReadySeconds` integer	Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
`replicas` integer	Replicas is the number of desired replicas. This is a pointer to distinguish between explicit zero and unspecified. Defaults to 1. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller
`selector` LabelSelector	Selector is a label query over pods that should match the replica count. Label keys and values that must match in order to be controlled by this replica set. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
`template` PodTemplateSpec	Template is the object that describes the pod that will be created if insufficient replicas are detected. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template

ReplicaSetStatus v1 apps

Appears In:

ReplicaSet [apps/v1]

Field	Description
`availableReplicas` integer	The number of available replicas (ready for at least minReadySeconds) for this replica set.
`conditions` ReplicaSetCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a replica set's current state.
`fullyLabeledReplicas` integer	The number of pods that have labels matching the labels of the pod template of the replicaset.
`observedGeneration` integer	ObservedGeneration reflects the generation of the most recently observed ReplicaSet.
`readyReplicas` integer	readyReplicas is the number of pods targeted by this ReplicaSet with a Ready Condition.
`replicas` integer	Replicas is the most recently observed number of replicas. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller

ReplicaSetList v1 apps

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ReplicaSet array	List of ReplicaSets. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ReplicaSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicaSet

Response

Code	Description
200 ReplicaSet	OK
201 ReplicaSet	Created
202 ReplicaSet	Accepted

Patch

partially update the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ReplicaSet	OK
201 ReplicaSet	Created

Replace

replace the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicaSet

Response

Code	Description
200 ReplicaSet	OK
201 ReplicaSet	Created

Delete

delete a ReplicaSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ReplicaSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ReplicaSet	OK

List

list or watch objects of kind ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ReplicaSetList	OK

List All Namespaces

list or watch objects of kind ReplicaSet

HTTP Request

GET /apis/apps/v1/replicasets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ReplicaSetList	OK

Watch

watch changes to an object of kind ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/replicasets/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/replicasets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/replicasets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ReplicaSet	OK
201 ReplicaSet	Created

Read Status

read status of the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ReplicaSet	OK

Replace Status

replace status of the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicaSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicaSet

Response

Code	Description
200 ReplicaSet	OK
201 ReplicaSet	Created

Misc Operations

Read Scale

read scale of the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Scale	OK

Replace Scale

replace scale of the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Scale

Response

Code	Description
200 Scale	OK
201 Scale	Created

Patch Scale

partially update scale of the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Scale	OK
201 Scale	Created

ReplicationController v1 core

ReplicationController Config to run 3 nginx instances.

apiVersion: v1
kind: ReplicationController
metadata:
  # Unique key of the ReplicationController instance
  name: replicationcontroller-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      # Run the nginx image
      - name: nginx
        image: nginx:1.14

Group	Version	Kind
`core`	`v1`	`ReplicationController`

Warning:

In many cases it is recommended to create a Deployment instead of a ReplicationController.

Appears In:

ReplicationControllerList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	If the Labels of a ReplicationController are empty, they are defaulted to be the same as the Pod(s) that the replication controller manages. Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` ReplicationControllerSpec	Spec defines the specification of the desired behavior of the replication controller. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` ReplicationControllerStatus	Status is the most recently observed status of the replication controller. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ReplicationControllerSpec v1 core

Appears In:

ReplicationController [core/v1]

Field	Description
`minReadySeconds` integer	Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
`replicas` integer	Replicas is the number of desired replicas. This is a pointer to distinguish between explicit zero and unspecified. Defaults to 1. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#what-is-a-replicationcontroller
`selector` object	Selector is a label query over pods that should match the Replicas count. If Selector is empty, it is defaulted to the labels present on the Pod template. Label keys and values that must match in order to be controlled by this replication controller, if empty defaulted to labels on Pod template. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
`template` PodTemplateSpec	Template is the object that describes the pod that will be created if insufficient replicas are detected. This takes precedence over a TemplateRef. The only allowed template.spec.restartPolicy value is "Always". More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template

ReplicationControllerStatus v1 core

Appears In:

ReplicationController [core/v1]

Field	Description
`availableReplicas` integer	The number of available replicas (ready for at least minReadySeconds) for this replication controller.
`conditions` ReplicationControllerCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a replication controller's current state.
`fullyLabeledReplicas` integer	The number of pods that have labels matching the labels of the pod template of the replication controller.
`observedGeneration` integer	ObservedGeneration reflects the generation of the most recently observed replication controller.
`readyReplicas` integer	The number of ready replicas for this replication controller.
`replicas` integer	Replicas is the most recently observed number of replicas. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#what-is-a-replicationcontroller

ReplicationControllerList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ReplicationController array	List of replication controllers. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ReplicationController

HTTP Request

POST /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicationController

Response

Code	Description
200 ReplicationController	OK
201 ReplicationController	Created
202 ReplicationController	Accepted

Patch

partially update the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ReplicationController	OK
201 ReplicationController	Created

Replace

replace the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicationController

Response

Code	Description
200 ReplicationController	OK
201 ReplicationController	Created

Delete

delete a ReplicationController

HTTP Request

DELETE /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ReplicationController

HTTP Request

DELETE /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ReplicationController	OK

List

list or watch objects of kind ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ReplicationControllerList	OK

List All Namespaces

list or watch objects of kind ReplicationController

HTTP Request

GET /api/v1/replicationcontrollers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ReplicationControllerList	OK

Watch

watch changes to an object of kind ReplicationController. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ReplicationController. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/replicationcontrollers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ReplicationController. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/replicationcontrollers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ReplicationController	OK
201 ReplicationController	Created

Read Status

read status of the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ReplicationController	OK

Replace Status

replace status of the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ReplicationController
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ReplicationController

Response

Code	Description
200 ReplicationController	OK
201 ReplicationController	Created

Misc Operations

Read Scale

read scale of the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Scale	OK

Replace Scale

replace scale of the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Scale

Response

Code	Description
200 Scale	OK
201 Scale	Created

Patch Scale

partially update scale of the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Scale	OK
201 Scale	Created

StatefulSet v1 apps

Group	Version	Kind
`apps`	`v1`	`StatefulSet`

Appears In:

StatefulSetList [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` StatefulSetSpec	Spec defines the desired identities of pods in this set.
`status` StatefulSetStatus	Status is the current status of Pods in this StatefulSet. This data may be out of date by some window of time.

StatefulSetSpec v1 apps

Appears In:

StatefulSet [apps/v1]

Field	Description
`minReadySeconds` integer	Minimum number of seconds for which a newly created pod should be ready without any of its container crashing for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
`ordinals` StatefulSetOrdinals	ordinals controls the numbering of replica indices in a StatefulSet. The default ordinals behavior assigns a "0" index to the first replica and increments the index by one for each additional replica requested.
`persistentVolumeClaimRetentionPolicy` StatefulSetPersistentVolumeClaimRetentionPolicy	persistentVolumeClaimRetentionPolicy describes the lifecycle of persistent volume claims created from volumeClaimTemplates. By default, all persistent volume claims are created as needed and retained until manually deleted. This policy allows the lifecycle to be altered, for example by deleting persistent volume claims when their stateful set is deleted, or when their pod is scaled down.
`podManagementPolicy` string	podManagementPolicy controls how pods are created during initial scale up, when replacing pods on nodes, or when scaling down. The default policy is `OrderedReady`, where pods are created in increasing order (pod-0, then pod-1, etc) and the controller will wait until each pod is ready before continuing. When scaling down, the pods are removed in the opposite order. The alternative policy is `Parallel` which will create pods in parallel to match the desired scale without waiting, and on scale down will delete all pods at once.
`replicas` integer	replicas is the desired number of replicas of the given Template. These are replicas in the sense that they are instantiations of the same Template, but individual replicas also have a consistent identity. If unspecified, defaults to 1.
`revisionHistoryLimit` integer	revisionHistoryLimit is the maximum number of revisions that will be maintained in the StatefulSet's revision history. The revision history consists of all revisions not represented by a currently applied StatefulSetSpec version. The default value is 10.
`selector` LabelSelector	selector is a label query over pods that should match the replica count. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
`serviceName` string	serviceName is the name of the service that governs this StatefulSet. This service must exist before the StatefulSet, and is responsible for the network identity of the set. Pods get DNS/hostnames that follow the pattern: pod-specific-string.serviceName.default.svc.cluster.local where "pod-specific-string" is managed by the StatefulSet controller.
`template` PodTemplateSpec	template is the object that describes the pod that will be created if insufficient replicas are detected. Each pod stamped out by the StatefulSet will fulfill this Template, but have a unique identity from the rest of the StatefulSet. Each pod will be named with the format <statefulsetname>-<podindex>. For example, a pod in a StatefulSet named "web" with index number "3" would be named "web-3". The only allowed template.spec.restartPolicy value is "Always".
`updateStrategy` StatefulSetUpdateStrategy	updateStrategy indicates the StatefulSetUpdateStrategy that will be employed to update Pods in the StatefulSet when a revision is made to Template.
`volumeClaimTemplates` PersistentVolumeClaim array	volumeClaimTemplates is a list of claims that pods are allowed to reference. The StatefulSet controller is responsible for mapping network identities to claims in a way that maintains the identity of a pod. Every claim in this list must have at least one matching (by name) volumeMount in one container in the template. A claim in this list takes precedence over any volumes in the template, with the same name.

StatefulSetStatus v1 apps

Appears In:

StatefulSet [apps/v1]

Field	Description
`availableReplicas` integer	Total number of available pods (ready for at least minReadySeconds) targeted by this statefulset.
`collisionCount` integer	collisionCount is the count of hash collisions for the StatefulSet. The StatefulSet controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ControllerRevision.
`conditions` StatefulSetCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a statefulset's current state.
`currentReplicas` integer	currentReplicas is the number of Pods created by the StatefulSet controller from the StatefulSet version indicated by currentRevision.
`currentRevision` string	currentRevision, if not empty, indicates the version of the StatefulSet used to generate Pods in the sequence [0,currentReplicas).
`observedGeneration` integer	observedGeneration is the most recent generation observed for this StatefulSet. It corresponds to the StatefulSet's generation, which is updated on mutation by the API Server.
`readyReplicas` integer	readyReplicas is the number of pods created for this StatefulSet with a Ready Condition.
`replicas` integer	replicas is the number of Pods created by the StatefulSet controller.
`updateRevision` string	updateRevision, if not empty, indicates the version of the StatefulSet used to generate Pods in the sequence [replicas-updatedReplicas,replicas)
`updatedReplicas` integer	updatedReplicas is the number of Pods created by the StatefulSet controller from the StatefulSet version indicated by updateRevision.

StatefulSetList v1 apps

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` StatefulSet array	Items is the list of stateful sets.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StatefulSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StatefulSet

Response

Code	Description
200 StatefulSet	OK
201 StatefulSet	Created
202 StatefulSet	Accepted

Patch

partially update the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StatefulSet	OK
201 StatefulSet	Created

Replace

replace the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StatefulSet

Response

Code	Description
200 StatefulSet	OK
201 StatefulSet	Created

Delete

delete a StatefulSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of StatefulSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StatefulSet	OK

List

list or watch objects of kind StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StatefulSetList	OK

List All Namespaces

list or watch objects of kind StatefulSet

HTTP Request

GET /apis/apps/v1/statefulsets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StatefulSetList	OK

Watch

watch changes to an object of kind StatefulSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/statefulsets/{name}

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of StatefulSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/statefulsets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of StatefulSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/statefulsets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StatefulSet	OK
201 StatefulSet	Created

Read Status

read status of the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StatefulSet	OK

Replace Status

replace status of the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StatefulSet
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StatefulSet

Response

Code	Description
200 StatefulSet	OK
201 StatefulSet	Created

Misc Operations

Read Scale

read scale of the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Scale	OK

Replace Scale

replace scale of the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Scale

Response

Code	Description
200 Scale	OK
201 Scale	Created

Patch Scale

partially update scale of the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

Parameter	Description
`name`	name of the Scale
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Scale	OK
201 Scale	Created

Service

Service API resources are responsible for stitching your workloads together into an accessible Loadbalanced Service. By default, Workloads are only accessible within the cluster, and they must be exposed externally using a either a *LoadBalancer* or *NodePort* Service. For development, internally accessible Workloads can be accessed via proxy through the api master using the kubectl proxy command.

Common resource types:

Services for providing a single ip endpoint loadbalanced across multiple Workload replicas.
Ingress for providing a https(s) endpoint http(s) routed to one or more *Services*.

Endpoints v1 core

Group	Version	Kind
`core`	`v1`	`Endpoints`

Appears In:

EndpointsList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`subsets` EndpointSubset array	The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.

EndpointsList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Endpoints array	List of endpoints.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create Endpoints

HTTP Request

POST /api/v1/namespaces/{namespace}/endpoints

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Endpoints

Response

Code	Description
200 Endpoints	OK
201 Endpoints	Created
202 Endpoints	Accepted

Patch

partially update the specified Endpoints

HTTP Request

PATCH /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

Parameter	Description
`name`	name of the Endpoints
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Endpoints	OK
201 Endpoints	Created

Replace

replace the specified Endpoints

HTTP Request

PUT /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

Parameter	Description
`name`	name of the Endpoints
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Endpoints

Response

Code	Description
200 Endpoints	OK
201 Endpoints	Created

Delete

delete Endpoints

HTTP Request

DELETE /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

Parameter	Description
`name`	name of the Endpoints
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Endpoints

HTTP Request

DELETE /api/v1/namespaces/{namespace}/endpoints

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Endpoints

HTTP Request

GET /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

Parameter	Description
`name`	name of the Endpoints
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Endpoints	OK

List

list or watch objects of kind Endpoints

HTTP Request

GET /api/v1/namespaces/{namespace}/endpoints

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EndpointsList	OK

List All Namespaces

list or watch objects of kind Endpoints

HTTP Request

GET /api/v1/endpoints

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EndpointsList	OK

Watch

watch changes to an object of kind Endpoints. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/endpoints/{name}

Path Parameters

Parameter	Description
`name`	name of the Endpoints
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/endpoints

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/endpoints

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

EndpointSlice v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`EndpointSlice`

Appears In:

EndpointSliceList [discovery/v1]

Field	Description
`addressType` string	addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`endpoints` Endpoint array	endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata.
`ports` EndpointPort array	ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

EndpointSliceList v1 discovery

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` EndpointSlice array	items is the list of endpoint slices
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata.

Write Operations

Create

create an EndpointSlice

HTTP Request

POST /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` EndpointSlice

Response

Code	Description
200 EndpointSlice	OK
201 EndpointSlice	Created
202 EndpointSlice	Accepted

Patch

partially update the specified EndpointSlice

HTTP Request

PATCH /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

Parameter	Description
`name`	name of the EndpointSlice
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 EndpointSlice	OK
201 EndpointSlice	Created

Replace

replace the specified EndpointSlice

HTTP Request

PUT /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

Parameter	Description
`name`	name of the EndpointSlice
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` EndpointSlice

Response

Code	Description
200 EndpointSlice	OK
201 EndpointSlice	Created

Delete

delete an EndpointSlice

HTTP Request

DELETE /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

Parameter	Description
`name`	name of the EndpointSlice
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of EndpointSlice

HTTP Request

DELETE /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

Parameter	Description
`name`	name of the EndpointSlice
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 EndpointSlice	OK

List

list or watch objects of kind EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EndpointSliceList	OK

List All Namespaces

list or watch objects of kind EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/endpointslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EndpointSliceList	OK

Watch

watch changes to an object of kind EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/namespaces/{namespace}/endpointslices/{name}

Path Parameters

Parameter	Description
`name`	name of the EndpointSlice
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/namespaces/{namespace}/endpointslices

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/endpointslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Ingress v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`Ingress`

Appears In:

IngressList [networking/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` IngressSpec	spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` IngressStatus	status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IngressSpec v1 networking

Appears In:

Ingress [networking/v1]

Field	Description
`defaultBackend` IngressBackend	defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
`ingressClassName` string	ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
`rules` IngressRule array	rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
`tls` IngressTLS array	tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.

IngressStatus v1 networking

Appears In:

Ingress [networking/v1]

Field	Description
`loadBalancer` IngressLoadBalancerStatus	loadBalancer contains the current status of the load-balancer.

IngressList v1 networking

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Ingress array	items is the list of Ingress.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an Ingress

HTTP Request

POST /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Ingress

Response

Code	Description
200 Ingress	OK
201 Ingress	Created
202 Ingress	Accepted

Patch

partially update the specified Ingress

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Ingress	OK
201 Ingress	Created

Replace

replace the specified Ingress

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Ingress

Response

Code	Description
200 Ingress	OK
201 Ingress	Created

Delete

delete an Ingress

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Ingress

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Ingress	OK

List

list or watch objects of kind Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 IngressList	OK

List All Namespaces

list or watch objects of kind Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/ingresses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 IngressList	OK

Watch

watch changes to an object of kind Ingress. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/ingresses/{name}

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Ingress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/ingresses

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Ingress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingresses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Ingress

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Ingress	OK
201 Ingress	Created

Read Status

read status of the specified Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Ingress	OK

Replace Status

replace status of the specified Ingress

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Ingress
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Ingress

Response

Code	Description
200 Ingress	OK
201 Ingress	Created

IngressClass v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressClass`

Appears In:

IngressClassList [networking/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` IngressClassSpec	spec is the desired state of the IngressClass. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IngressClassSpec v1 networking

Appears In:

IngressClass [networking/v1]

Field	Description
`controller` string	controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
`parameters` IngressClassParametersReference	parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.

IngressClassList v1 networking

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` IngressClass array	items is the list of IngressClasses.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata.

Write Operations

Create

create an IngressClass

HTTP Request

POST /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` IngressClass

Response

Code	Description
200 IngressClass	OK
201 IngressClass	Created
202 IngressClass	Accepted

Patch

partially update the specified IngressClass

HTTP Request

PATCH /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the IngressClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 IngressClass	OK
201 IngressClass	Created

Replace

replace the specified IngressClass

HTTP Request

PUT /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the IngressClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` IngressClass

Response

Code	Description
200 IngressClass	OK
201 IngressClass	Created

Delete

delete an IngressClass

HTTP Request

DELETE /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the IngressClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of IngressClass

HTTP Request

DELETE /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified IngressClass

HTTP Request

GET /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the IngressClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 IngressClass	OK

List

list or watch objects of kind IngressClass

HTTP Request

GET /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 IngressClassList	OK

Watch

watch changes to an object of kind IngressClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingressclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the IngressClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of IngressClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingressclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Service v1 core

Service Config to load balance traffic across all Pods with the app=nginx label. Receives on and sends to port 80. Exposes an externally accessible endpoint.

kind: Service
apiVersion: v1
metadata:
  # Unique key of the Service instance
  name: service-example
spec:
  ports:
    # Accept traffic sent to port 80
    - name: http
      port: 80
      targetPort: 80
  selector:
    # Loadbalance traffic across Pods matching
    # this label selector
    app: nginx
  # Create an HA proxy in the cloud provider
  # with an External IP address - *Only supported
  # by some cloud providers*
  type: LoadBalancer

Group	Version	Kind
`core`	`v1`	`Service`

Appears In:

ServiceList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` ServiceSpec	Spec defines the behavior of a service. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` ServiceStatus	Most recently observed status of the service. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ServiceSpec v1 core

Appears In:

Service [core/v1]

Field	Description
`allocateLoadBalancerNodePorts` boolean	allocateLoadBalancerNodePorts defines if NodePorts will be automatically allocated for services with type LoadBalancer. Default is "true". It may be set to "false" if the cluster load-balancer does not rely on NodePorts. If the caller requests specific NodePorts (by specifying a value), those requests will be respected, regardless of this field. This field may only be set for services with type LoadBalancer and will be cleared if the type is changed to any other type.
`clusterIP` string	clusterIP is the IP address of the service and is usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be blank) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
`clusterIPs` string array	ClusterIPs is a list of IP addresses assigned to this service, and are usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be empty) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. If this field is not specified, it will be initialized from the clusterIP field. If this field is specified, clients must ensure that clusterIPs[0] and clusterIP have the same value. This field may hold a maximum of two entries (dual-stack IPs, in either order). These IPs must correspond to the values of the ipFamilies field. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
`externalIPs` string array	externalIPs is a list of IP addresses for which nodes in the cluster will also accept traffic for this service. These IPs are not managed by Kubernetes. The user is responsible for ensuring that traffic arrives at a node with this IP. A common example is external load-balancers that are not part of the Kubernetes system.
`externalName` string	externalName is the external reference that discovery mechanisms will return as an alias for this service (e.g. a DNS CNAME record). No proxying will be involved. Must be a lowercase RFC-1123 hostname (https://tools.ietf.org/html/rfc1123) and requires `type` to be "ExternalName".
`externalTrafficPolicy` string	externalTrafficPolicy describes how nodes distribute service traffic they receive on one of the Service's "externally-facing" addresses (NodePorts, ExternalIPs, and LoadBalancer IPs). If set to "Local", the proxy will configure the service in a way that assumes that external load balancers will take care of balancing the service traffic between nodes, and so each node will deliver traffic only to the node-local endpoints of the service, without masquerading the client source IP. (Traffic mistakenly sent to a node with no endpoints will be dropped.) The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features). Note that traffic sent to an External IP or LoadBalancer IP from within the cluster will always get "Cluster" semantics, but clients sending to a NodePort from within the cluster may need to take traffic policy into account when picking a node.
`healthCheckNodePort` integer	healthCheckNodePort specifies the healthcheck nodePort for the service. This only applies when type is set to LoadBalancer and externalTrafficPolicy is set to Local. If a value is specified, is in-range, and is not in use, it will be used. If not specified, a value will be automatically allocated. External systems (e.g. load-balancers) can use this port to determine if a given node holds endpoints for this service or not. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type). This field cannot be updated once set.
`internalTrafficPolicy` string	InternalTrafficPolicy describes how nodes distribute service traffic they receive on the ClusterIP. If set to "Local", the proxy will assume that pods only want to talk to endpoints of the service on the same node as the pod, dropping the traffic if there are no local endpoints. The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features).
`ipFamilies` string array	IPFamilies is a list of IP families (e.g. IPv4, IPv6) assigned to this service. This field is usually assigned automatically based on cluster configuration and the ipFamilyPolicy field. If this field is specified manually, the requested family is available in the cluster, and ipFamilyPolicy allows it, it will be used; otherwise creation of the service will fail. This field is conditionally mutable: it allows for adding or removing a secondary IP family, but it does not allow changing the primary IP family of the Service. Valid values are "IPv4" and "IPv6". This field only applies to Services of types ClusterIP, NodePort, and LoadBalancer, and does apply to "headless" services. This field will be wiped when updating a Service to type ExternalName. This field may hold a maximum of two entries (dual-stack families, in either order). These families must correspond to the values of the clusterIPs field, if specified. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field.
`ipFamilyPolicy` string	IPFamilyPolicy represents the dual-stack-ness requested or required by this Service. If there is no value provided, then this field will be set to SingleStack. Services can be "SingleStack" (a single IP family), "PreferDualStack" (two IP families on dual-stack configured clusters or a single IP family on single-stack clusters), or "RequireDualStack" (two IP families on dual-stack configured clusters, otherwise fail). The ipFamilies and clusterIPs fields depend on the value of this field. This field will be wiped when updating a service to type ExternalName.
`loadBalancerClass` string	loadBalancerClass is the class of the load balancer implementation this Service belongs to. If specified, the value of this field must be a label-style identifier, with an optional prefix, e.g. "internal-vip" or "example.com/internal-vip". Unprefixed names are reserved for end-users. This field can only be set when the Service type is 'LoadBalancer'. If not set, the default load balancer implementation is used, today this is typically done through the cloud provider integration, but should apply for any default implementation. If set, it is assumed that a load balancer implementation is watching for Services with a matching class. Any default load balancer implementation (e.g. cloud providers) should ignore Services that set this field. This field can only be set when creating or updating a Service to type 'LoadBalancer'. Once set, it can not be changed. This field will be wiped when a service is updated to a non 'LoadBalancer' type.
`loadBalancerIP` string	Only applies to Service Type: LoadBalancer. This feature depends on whether the underlying cloud-provider supports specifying the loadBalancerIP when a load balancer is created. This field will be ignored if the cloud-provider does not support the feature. Deprecated: This field was under-specified and its meaning varies across implementations. Using it is non-portable and it may not support dual-stack. Users are encouraged to use implementation-specific annotations when available.
`loadBalancerSourceRanges` string array	If specified and supported by the platform, this will restrict traffic through the cloud-provider load-balancer will be restricted to the specified client IPs. This field will be ignored if the cloud-provider does not support the feature." More info: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/
`ports` ServicePort array patch strategy: merge patch merge key: port	The list of ports that are exposed by this service. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
`publishNotReadyAddresses` boolean	publishNotReadyAddresses indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready. The primary use case for setting this field is for a StatefulSet's Headless Service to propagate SRV DNS records for its Pods for the purpose of peer discovery. The Kubernetes controllers that generate Endpoints and EndpointSlice resources for Services interpret this to mean that all endpoints are considered "ready" even if the Pods themselves are not. Agents which consume only Kubernetes generated endpoints through the Endpoints or EndpointSlice resources can safely assume this behavior.
`selector` object	Route service traffic to pods with label keys and values matching this selector. If empty or not present, the service is assumed to have an external process managing its endpoints, which Kubernetes will not modify. Only applies to types ClusterIP, NodePort, and LoadBalancer. Ignored if type is ExternalName. More info: https://kubernetes.io/docs/concepts/services-networking/service/
`sessionAffinity` string	Supports "ClientIP" and "None". Used to maintain session affinity. Enable client IP based session affinity. Must be ClientIP or None. Defaults to None. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
`sessionAffinityConfig` SessionAffinityConfig	sessionAffinityConfig contains the configurations of session affinity.
`trafficDistribution` string	TrafficDistribution offers a way to express preferences for how traffic is distributed to Service endpoints. Implementations can use this field as a hint, but are not required to guarantee strict adherence. If the field is not set, the implementation will apply its default routing strategy. If set to "PreferClose", implementations should prioritize endpoints that are topologically close (e.g., same zone). This is a beta field and requires enabling ServiceTrafficDistribution feature.
`type` string	type determines how the Service is exposed. Defaults to ClusterIP. Valid options are ExternalName, ClusterIP, NodePort, and LoadBalancer. "ClusterIP" allocates a cluster-internal IP address for load-balancing to endpoints. Endpoints are determined by the selector or if that is not specified, by manual construction of an Endpoints object or EndpointSlice objects. If clusterIP is "None", no virtual IP is allocated and the endpoints are published as a set of endpoints rather than a virtual IP. "NodePort" builds on ClusterIP and allocates a port on every node which routes to the same endpoints as the clusterIP. "LoadBalancer" builds on NodePort and creates an external load-balancer (if supported in the current cloud) which routes to the same endpoints as the clusterIP. "ExternalName" aliases this service to the specified externalName. Several other fields do not apply to ExternalName services. More info: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types

ServiceStatus v1 core

Appears In:

Service [core/v1]

Field	Description
`conditions` Condition array patch strategy: merge patch merge key: type	Current service state
`loadBalancer` LoadBalancerStatus	LoadBalancer contains the current status of the load-balancer, if one is present.

ServiceList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Service array	List of services
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Service

Response

Code	Description
200 Service	OK
201 Service	Created
202 Service	Accepted

Patch

partially update the specified Service

HTTP Request

PATCH /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Service	OK
201 Service	Created

Replace

replace the specified Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Service

Response

Code	Description
200 Service	OK
201 Service	Created

Delete

delete a Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Service	OK
202 Service	Accepted

Delete Collection

delete collection of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Service	OK

List

list or watch objects of kind Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ServiceList	OK

List All Namespaces

list or watch objects of kind Service

HTTP Request

GET /api/v1/services

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ServiceList	OK

Watch

watch changes to an object of kind Service. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/services/{name}

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Service. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/services

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Service. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/services

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Service

HTTP Request

PATCH /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Service	OK
201 Service	Created

Read Status

read status of the specified Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Service	OK

Replace Status

replace status of the specified Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Service
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Service

Response

Code	Description
200 Service	OK
201 Service	Created

Proxy Operations

Create Connect Proxy

connect POST requests to proxy of Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Create Connect Proxy Path

connect POST requests to proxy of Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Delete Connect Proxy

connect DELETE requests to proxy of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Get Connect Proxy

connect GET requests to proxy of Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Get Connect Proxy Path

connect GET requests to proxy of Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Head Connect Proxy

connect HEAD requests to proxy of Service

HTTP Request

HEAD /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Head Connect Proxy Path

connect HEAD requests to proxy of Service

HTTP Request

HEAD /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Replace Connect Proxy

connect PUT requests to proxy of Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Replace Connect Proxy Path

connect PUT requests to proxy of Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the ServiceProxyOptions
`namespace`	object name and auth scope, such as for teams and projects
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

Code	Description
200 string	OK

Config & Storage

Config and Storage resources are responsible for injecting data into your applications and persisting data externally to your container.

Common resource types:

ConfigMaps for providing text key value pairs injected into the application through environment variables, command line arguments, or files
Secrets for providing binary data injected into the application through files
Volumes for providing a filesystem external to the Container. Maybe shared across Containers within the same Pod and have a lifetime persisting beyond a Container or Pod.

ConfigMap v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMap`

Appears In:

ConfigMapList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`binaryData` object	BinaryData contains the binary data. Each key must consist of alphanumeric characters, '-', '_' or '.'. BinaryData can contain byte sequences that are not in the UTF-8 range. The keys stored in BinaryData must not overlap with the ones in the Data field, this is enforced during validation process. Using this field will require 1.10+ apiserver and kubelet.
`data` object	Data contains the configuration data. Each key must consist of alphanumeric characters, '-', '_' or '.'. Values with non-UTF-8 byte sequences must use the BinaryData field. The keys stored in Data must not overlap with the keys in the BinaryData field, this is enforced during validation process.
`immutable` boolean	Immutable, if set to true, ensures that data stored in the ConfigMap cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

ConfigMapList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ConfigMap array	Items is the list of ConfigMaps.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ConfigMap

HTTP Request

POST /api/v1/namespaces/{namespace}/configmaps

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ConfigMap

Response

Code	Description
200 ConfigMap	OK
201 ConfigMap	Created
202 ConfigMap	Accepted

Patch

partially update the specified ConfigMap

HTTP Request

PATCH /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

Parameter	Description
`name`	name of the ConfigMap
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ConfigMap	OK
201 ConfigMap	Created

Replace

replace the specified ConfigMap

HTTP Request

PUT /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

Parameter	Description
`name`	name of the ConfigMap
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ConfigMap

Response

Code	Description
200 ConfigMap	OK
201 ConfigMap	Created

Delete

delete a ConfigMap

HTTP Request

DELETE /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

Parameter	Description
`name`	name of the ConfigMap
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ConfigMap

HTTP Request

DELETE /api/v1/namespaces/{namespace}/configmaps

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ConfigMap

HTTP Request

GET /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

Parameter	Description
`name`	name of the ConfigMap
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ConfigMap	OK

List

list or watch objects of kind ConfigMap

HTTP Request

GET /api/v1/namespaces/{namespace}/configmaps

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ConfigMapList	OK

List All Namespaces

list or watch objects of kind ConfigMap

HTTP Request

GET /api/v1/configmaps

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ConfigMapList	OK

Watch

watch changes to an object of kind ConfigMap. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/configmaps/{name}

Path Parameters

Parameter	Description
`name`	name of the ConfigMap
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ConfigMap. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/configmaps

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ConfigMap. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/configmaps

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

CSIDriver v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`CSIDriver`

Appears In:

CSIDriverList [storage/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata. metadata.Name indicates the name of the CSI driver that this object refers to; it MUST be the same name returned by the CSI GetPluginName() call for that driver. The driver name must be 63 characters or less, beginning and ending with an alphanumeric character ([a-z0-9A-Z]) with dashes (-), dots (.), and alphanumerics between. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` CSIDriverSpec	spec represents the specification of the CSI Driver.

CSIDriverSpec v1 storage

Appears In:

CSIDriver [storage/v1]

Field	Description
`attachRequired` boolean	attachRequired indicates this CSI volume driver requires an attach operation (because it implements the CSI ControllerPublishVolume() method), and that the Kubernetes attach detach controller should call the attach volume interface which checks the volumeattachment status and waits until the volume is attached before proceeding to mounting. The CSI external-attacher coordinates with CSI volume driver and updates the volumeattachment status when the attach operation is complete. If the CSIDriverRegistry feature gate is enabled and the value is specified to false, the attach operation will be skipped. Otherwise the attach operation will be called. This field is immutable.
`fsGroupPolicy` string	fsGroupPolicy defines if the underlying volume supports changing ownership and permission of the volume before being mounted. Refer to the specific FSGroupPolicy values for additional details. This field was immutable in Kubernetes < 1.29 and now is mutable. Defaults to ReadWriteOnceWithFSType, which will examine each volume to determine if Kubernetes should modify ownership and permissions of the volume. With the default policy the defined fsGroup will only be applied if a fstype is defined and the volume's access mode contains ReadWriteOnce.
`podInfoOnMount` boolean	podInfoOnMount indicates this CSI volume driver requires additional pod information (like podName, podUID, etc.) during mount operations, if set to true. If set to false, pod information will not be passed on mount. Default is false. The CSI driver specifies podInfoOnMount as part of driver deployment. If true, Kubelet will pass pod information as VolumeContext in the CSI NodePublishVolume() calls. The CSI driver is responsible for parsing and validating the information passed in as VolumeContext. The following VolumeContext will be passed if podInfoOnMount is set to true. This list might grow, but the prefix will be used. "csi.storage.k8s.io/pod.name": pod.Name "csi.storage.k8s.io/pod.namespace": pod.Namespace "csi.storage.k8s.io/pod.uid": string(pod.UID) "csi.storage.k8s.io/ephemeral": "true" if the volume is an ephemeral inline volume defined by a CSIVolumeSource, otherwise "false" "csi.storage.k8s.io/ephemeral" is a new feature in Kubernetes 1.16. It is only required for drivers which support both the "Persistent" and "Ephemeral" VolumeLifecycleMode. Other drivers can leave pod info disabled and/or ignore this field. As Kubernetes 1.15 doesn't support this field, drivers can only support one mode when deployed on such a cluster and the deployment determines which mode that is, for example via a command line parameter of the driver. This field was immutable in Kubernetes < 1.29 and now is mutable.
`requiresRepublish` boolean	requiresRepublish indicates the CSI driver wants `NodePublishVolume` being periodically called to reflect any possible change in the mounted volume. This field defaults to false. Note: After a successful initial NodePublishVolume call, subsequent calls to NodePublishVolume should only update the contents of the volume. New mount points will not be seen by a running container.
`seLinuxMount` boolean	seLinuxMount specifies if the CSI driver supports "-o context" mount option. When "true", the CSI driver must ensure that all volumes provided by this CSI driver can be mounted separately with different `-o context` options. This is typical for storage backends that provide volumes as filesystems on block devices or as independent shared volumes. Kubernetes will call NodeStage / NodePublish with "-o context=xyz" mount option when mounting a ReadWriteOncePod volume used in Pod that has explicitly set SELinux context. In the future, it may be expanded to other volume AccessModes. In any case, Kubernetes will ensure that the volume is mounted only with a single SELinux context. When "false", Kubernetes won't pass any special SELinux mount options to the driver. This is typical for volumes that represent subdirectories of a bigger shared filesystem. Default is "false".
`storageCapacity` boolean	storageCapacity indicates that the CSI volume driver wants pod scheduling to consider the storage capacity that the driver deployment will report by creating CSIStorageCapacity objects with capacity information, if set to true. The check can be enabled immediately when deploying a driver. In that case, provisioning new volumes with late binding will pause until the driver deployment has published some suitable CSIStorageCapacity object. Alternatively, the driver can be deployed with the field unset or false and it can be flipped later when storage capacity information has been published. This field was immutable in Kubernetes <= 1.22 and now is mutable.
`tokenRequests` TokenRequest array	tokenRequests indicates the CSI driver needs pods' service account tokens it is mounting volume for to do necessary authentication. Kubelet will pass the tokens in VolumeContext in the CSI NodePublishVolume calls. The CSI driver should parse and validate the following VolumeContext: "csi.storage.k8s.io/serviceAccount.tokens": { "<audience>": { "token": <token>, "expirationTimestamp": <expiration timestamp in RFC3339>, }, ... } Note: Audience in each TokenRequest should be different and at most one token is empty string. To receive a new token after expiry, RequiresRepublish can be used to trigger NodePublishVolume periodically.
`volumeLifecycleModes` string array	volumeLifecycleModes defines what kind of volumes this CSI volume driver supports. The default if the list is empty is "Persistent", which is the usage defined by the CSI specification and implemented in Kubernetes via the usual PV/PVC mechanism. The other mode is "Ephemeral". In this mode, volumes are defined inline inside the pod spec with CSIVolumeSource and their lifecycle is tied to the lifecycle of that pod. A driver has to be aware of this because it is only going to get a NodePublishVolume call for such a volume. For more information about implementing this mode, see https://kubernetes-csi.github.io/docs/ephemeral-local-volumes.html A driver can support one or more of these modes and more modes may be added in the future. This field is beta. This field is immutable.

CSIDriverList v1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CSIDriver array	items is the list of CSIDriver
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSIDriver

HTTP Request

POST /apis/storage.k8s.io/v1/csidrivers

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSIDriver

Response

Code	Description
200 CSIDriver	OK
201 CSIDriver	Created
202 CSIDriver	Accepted

Patch

partially update the specified CSIDriver

HTTP Request

PATCH /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIDriver

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CSIDriver	OK
201 CSIDriver	Created

Replace

replace the specified CSIDriver

HTTP Request

PUT /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIDriver

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSIDriver

Response

Code	Description
200 CSIDriver	OK
201 CSIDriver	Created

Delete

delete a CSIDriver

HTTP Request

DELETE /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIDriver

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 CSIDriver	OK
202 CSIDriver	Accepted

Delete Collection

delete collection of CSIDriver

HTTP Request

DELETE /apis/storage.k8s.io/v1/csidrivers

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CSIDriver

HTTP Request

GET /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIDriver

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CSIDriver	OK

List

list or watch objects of kind CSIDriver

HTTP Request

GET /apis/storage.k8s.io/v1/csidrivers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CSIDriverList	OK

Watch

watch changes to an object of kind CSIDriver. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csidrivers/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIDriver

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CSIDriver. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csidrivers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

CSINode v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`CSINode`

Appears In:

CSINodeList [storage/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. metadata.name must be the Kubernetes node name.
`spec` CSINodeSpec	spec is the specification of CSINode

CSINodeSpec v1 storage

Appears In:

CSINode [storage/v1]

Field	Description
`drivers` CSINodeDriver array patch strategy: merge patch merge key: name	drivers is a list of information of all CSI Drivers existing on a node. If all drivers in the list are uninstalled, this can become empty.

CSINodeList v1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CSINode array	items is the list of CSINode
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSINode

HTTP Request

POST /apis/storage.k8s.io/v1/csinodes

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSINode

Response

Code	Description
200 CSINode	OK
201 CSINode	Created
202 CSINode	Accepted

Patch

partially update the specified CSINode

HTTP Request

PATCH /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

Parameter	Description
`name`	name of the CSINode

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CSINode	OK
201 CSINode	Created

Replace

replace the specified CSINode

HTTP Request

PUT /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

Parameter	Description
`name`	name of the CSINode

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSINode

Response

Code	Description
200 CSINode	OK
201 CSINode	Created

Delete

delete a CSINode

HTTP Request

DELETE /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

Parameter	Description
`name`	name of the CSINode

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 CSINode	OK
202 CSINode	Accepted

Delete Collection

delete collection of CSINode

HTTP Request

DELETE /apis/storage.k8s.io/v1/csinodes

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CSINode

HTTP Request

GET /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

Parameter	Description
`name`	name of the CSINode

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CSINode	OK

List

list or watch objects of kind CSINode

HTTP Request

GET /apis/storage.k8s.io/v1/csinodes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CSINodeList	OK

Watch

watch changes to an object of kind CSINode. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csinodes/{name}

Path Parameters

Parameter	Description
`name`	name of the CSINode

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CSINode. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csinodes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

CSIStorageCapacity v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`CSIStorageCapacity`

Appears In:

CSIStorageCapacityList [storage/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`capacity` Quantity	capacity is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. The semantic is currently (CSI spec 1.2) defined as: The available capacity, in bytes, of the storage that can be used to provision volumes. If not set, that information is currently unavailable.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`maximumVolumeSize` Quantity	maximumVolumeSize is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. This is defined since CSI spec 1.4.0 as the largest size that may be used in a CreateVolumeRequest.capacity_range.required_bytes field to create a volume with the same parameters as those in GetCapacityRequest. The corresponding value in the Kubernetes API is ResourceRequirements.Requests in a volume claim.
`metadata` ObjectMeta	Standard object's metadata. The name has no particular meaning. It must be a DNS subdomain (dots allowed, 253 characters). To ensure that there are no conflicts with other CSI drivers on the cluster, the recommendation is to use csisc-<uuid>, a generated name, or a reverse-domain name which ends with the unique CSI driver name. Objects are namespaced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`nodeTopology` LabelSelector	nodeTopology defines which nodes have access to the storage for which capacity was reported. If not set, the storage is not accessible from any node in the cluster. If empty, the storage is accessible from all nodes. This field is immutable.
`storageClassName` string	storageClassName represents the name of the StorageClass that the reported capacity applies to. It must meet the same requirements as the name of a StorageClass object (non-empty, DNS subdomain). If that object no longer exists, the CSIStorageCapacity object is obsolete and should be removed by its creator. This field is immutable.

CSIStorageCapacityList v1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CSIStorageCapacity array	items is the list of CSIStorageCapacity objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSIStorageCapacity

HTTP Request

POST /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSIStorageCapacity

Response

Code	Description
200 CSIStorageCapacity	OK
201 CSIStorageCapacity	Created
202 CSIStorageCapacity	Accepted

Patch

partially update the specified CSIStorageCapacity

HTTP Request

PATCH /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIStorageCapacity
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CSIStorageCapacity	OK
201 CSIStorageCapacity	Created

Replace

replace the specified CSIStorageCapacity

HTTP Request

PUT /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIStorageCapacity
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CSIStorageCapacity

Response

Code	Description
200 CSIStorageCapacity	OK
201 CSIStorageCapacity	Created

Delete

delete a CSIStorageCapacity

HTTP Request

DELETE /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIStorageCapacity
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of CSIStorageCapacity

HTTP Request

DELETE /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIStorageCapacity
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CSIStorageCapacity	OK

List

list or watch objects of kind CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CSIStorageCapacityList	OK

List All Namespaces

list or watch objects of kind CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/csistoragecapacities

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CSIStorageCapacityList	OK

Watch

watch changes to an object of kind CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

Parameter	Description
`name`	name of the CSIStorageCapacity
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/namespaces/{namespace}/csistoragecapacities

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csistoragecapacities

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Secret v1 core

Group	Version	Kind
`core`	`v1`	`Secret`

Appears In:

SecretList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`data` object	Data contains the secret data. Each key must consist of alphanumeric characters, '-', '_' or '.'. The serialized form of the secret data is a base64 encoded string, representing the arbitrary (possibly non-string) data value here. Described in https://tools.ietf.org/html/rfc4648#section-4
`immutable` boolean	Immutable, if set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`stringData` object	stringData allows specifying non-binary secret data in string form. It is provided as a write-only input field for convenience. All keys and values are merged into the data field on write, overwriting any existing values. The stringData field is never output when reading from the API.
`type` string	Used to facilitate programmatic handling of secret data. More info: https://kubernetes.io/docs/concepts/configuration/secret/#secret-types

SecretList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Secret array	Items is a list of secret objects. More info: https://kubernetes.io/docs/concepts/configuration/secret
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Secret

HTTP Request

POST /api/v1/namespaces/{namespace}/secrets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Secret

Response

Code	Description
200 Secret	OK
201 Secret	Created
202 Secret	Accepted

Patch

partially update the specified Secret

HTTP Request

PATCH /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

Parameter	Description
`name`	name of the Secret
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Secret	OK
201 Secret	Created

Replace

replace the specified Secret

HTTP Request

PUT /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

Parameter	Description
`name`	name of the Secret
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Secret

Response

Code	Description
200 Secret	OK
201 Secret	Created

Delete

delete a Secret

HTTP Request

DELETE /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

Parameter	Description
`name`	name of the Secret
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Secret

HTTP Request

DELETE /api/v1/namespaces/{namespace}/secrets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Secret

HTTP Request

GET /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

Parameter	Description
`name`	name of the Secret
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Secret	OK

List

list or watch objects of kind Secret

HTTP Request

GET /api/v1/namespaces/{namespace}/secrets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 SecretList	OK

List All Namespaces

list or watch objects of kind Secret

HTTP Request

GET /api/v1/secrets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 SecretList	OK

Watch

watch changes to an object of kind Secret. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/secrets/{name}

Path Parameters

Parameter	Description
`name`	name of the Secret
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Secret. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/secrets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Secret. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/secrets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

PersistentVolumeClaim v1 core

Group	Version	Kind
`core`	`v1`	`PersistentVolumeClaim`

A PersistentVolume must be allocated in the cluster to use this.

Appears In:

PersistentVolumeClaimList [core/v1]
StatefulSetSpec [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PersistentVolumeClaimSpec	spec defines the desired characteristics of a volume requested by a pod author. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
`status` PersistentVolumeClaimStatus	status represents the current information/status of a persistent volume claim. Read-only. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims

PersistentVolumeClaimSpec v1 core

Appears In:

PersistentVolumeClaim [core/v1]
PersistentVolumeClaimTemplate [core/v1]

Field	Description
`accessModes` string array	accessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1
`dataSource` TypedLocalObjectReference	dataSource field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An existing PVC (PersistentVolumeClaim) If the provisioner or an external controller can support the specified data source, it will create a new volume based on the contents of the specified data source. When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. If the namespace is specified, then dataSourceRef will not be copied to dataSource.
`dataSourceRef` TypedObjectReference	dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired. This may be any object from a non-empty API group (non core object) or a PersistentVolumeClaim object. When this field is specified, volume binding will only succeed if the type of the specified object matches some installed volume populator or dynamic provisioner. This field will replace the functionality of the dataSource field and as such if both fields are non-empty, they must have the same value. For backwards compatibility, when namespace isn't specified in dataSourceRef, both fields (dataSource and dataSourceRef) will be set to the same value automatically if one of them is empty and the other is non-empty. When namespace is specified in dataSourceRef, dataSource isn't set to the same value and must be empty. There are three important differences between dataSource and dataSourceRef: * While dataSource only allows two specific types of objects, dataSourceRef allows any non-core object, as well as PersistentVolumeClaim objects. * While dataSource ignores disallowed values (dropping them), dataSourceRef preserves all values, and generates an error if a disallowed value is specified. * While dataSource only allows local objects, dataSourceRef allows objects in any namespaces. (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled.
`resources` VolumeResourceRequirements	resources represents the minimum resources the volume should have. If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements that are lower than previous value but must still be higher than capacity recorded in the status field of the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources
`selector` LabelSelector	selector is a label query over volumes to consider for binding.
`storageClassName` string	storageClassName is the name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1
`volumeAttributesClassName` string	volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. If specified, the CSI driver will create or update the volume with the attributes defined in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass will be applied to the claim but it's not allowed to reset this field to empty string once it is set. If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass will be set by the persistentvolume controller if it exists. If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource exists. More info: https://kubernetes.io/docs/concepts/storage/volume-attributes-classes/ (Beta) Using this field requires the VolumeAttributesClass feature gate to be enabled (off by default).
`volumeMode` string	volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec.
`volumeName` string	volumeName is the binding reference to the PersistentVolume backing this claim.

PersistentVolumeClaimStatus v1 core

Appears In:

PersistentVolumeClaim [core/v1]

Field	Description
`accessModes` string array	accessModes contains the actual access modes the volume backing the PVC has. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1
`allocatedResourceStatuses` object	allocatedResourceStatuses stores status of resource being resized for the given PVC. Key names follow standard Kubernetes label syntax. Valid values are either: * Un-prefixed keys: - storage - the capacity of the volume. * Custom resources must use implementation-defined prefixed names such as "example.com/my-custom-resource" Apart from above values - keys that are unprefixed or have kubernetes.io prefix are considered reserved and hence may not be used. ClaimResourceStatus can be in any of following states: - ControllerResizeInProgress: State set when resize controller starts resizing the volume in control-plane. - ControllerResizeFailed: State set when resize has failed in resize controller with a terminal error. - NodeResizePending: State set when resize controller has finished resizing the volume but further resizing of volume is needed on the node. - NodeResizeInProgress: State set when kubelet starts resizing the volume. - NodeResizeFailed: State set when resizing has failed in kubelet with a terminal error. Transient errors don't set NodeResizeFailed. For example: if expanding a PVC for more capacity - this field can be one of the following states: - pvc.status.allocatedResourceStatus['storage'] = "ControllerResizeInProgress" - pvc.status.allocatedResourceStatus['storage'] = "ControllerResizeFailed" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizePending" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizeInProgress" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizeFailed" When this field is not set, it means that no resize operation is in progress for the given PVC. A controller that receives PVC update with previously unknown resourceName or ClaimResourceStatus should ignore the update for the purpose it was designed. For example - a controller that only is responsible for resizing capacity of the volume, should ignore PVC updates that change other valid resources associated with PVC. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature.
`allocatedResources` object	allocatedResources tracks the resources allocated to a PVC including its capacity. Key names follow standard Kubernetes label syntax. Valid values are either: * Un-prefixed keys: - storage - the capacity of the volume. * Custom resources must use implementation-defined prefixed names such as "example.com/my-custom-resource" Apart from above values - keys that are unprefixed or have kubernetes.io prefix are considered reserved and hence may not be used. Capacity reported here may be larger than the actual capacity when a volume expansion operation is requested. For storage quota, the larger value from allocatedResources and PVC.spec.resources is used. If allocatedResources is not set, PVC.spec.resources alone is used for quota calculation. If a volume expansion capacity request is lowered, allocatedResources is only lowered if there are no expansion operations in progress and if the actual volume capacity is equal or lower than the requested capacity. A controller that receives PVC update with previously unknown resourceName should ignore the update for the purpose it was designed. For example - a controller that only is responsible for resizing capacity of the volume, should ignore PVC updates that change other valid resources associated with PVC. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature.
`capacity` object	capacity represents the actual resources of the underlying volume.
`conditions` PersistentVolumeClaimCondition array patch strategy: merge patch merge key: type	conditions is the current Condition of persistent volume claim. If underlying persistent volume is being resized then the Condition will be set to 'Resizing'.
`currentVolumeAttributesClassName` string	currentVolumeAttributesClassName is the current name of the VolumeAttributesClass the PVC is using. When unset, there is no VolumeAttributeClass applied to this PersistentVolumeClaim This is a beta field and requires enabling VolumeAttributesClass feature (off by default).
`modifyVolumeStatus` ModifyVolumeStatus	ModifyVolumeStatus represents the status object of ControllerModifyVolume operation. When this is unset, there is no ModifyVolume operation being attempted. This is a beta field and requires enabling VolumeAttributesClass feature (off by default).
`phase` string	phase represents the current phase of PersistentVolumeClaim.

PersistentVolumeClaimList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PersistentVolumeClaim array	items is a list of persistent volume claims. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PersistentVolumeClaim

HTTP Request

POST /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolumeClaim

Response

Code	Description
200 PersistentVolumeClaim	OK
201 PersistentVolumeClaim	Created
202 PersistentVolumeClaim	Accepted

Patch

partially update the specified PersistentVolumeClaim

HTTP Request

PATCH /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PersistentVolumeClaim	OK
201 PersistentVolumeClaim	Created

Replace

replace the specified PersistentVolumeClaim

HTTP Request

PUT /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolumeClaim

Response

Code	Description
200 PersistentVolumeClaim	OK
201 PersistentVolumeClaim	Created

Delete

delete a PersistentVolumeClaim

HTTP Request

DELETE /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 PersistentVolumeClaim	OK
202 PersistentVolumeClaim	Accepted

Delete Collection

delete collection of PersistentVolumeClaim

HTTP Request

DELETE /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PersistentVolumeClaim	OK

List

list or watch objects of kind PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PersistentVolumeClaimList	OK

List All Namespaces

list or watch objects of kind PersistentVolumeClaim

HTTP Request

GET /api/v1/persistentvolumeclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PersistentVolumeClaimList	OK

Watch

watch changes to an object of kind PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/persistentvolumeclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified PersistentVolumeClaim

HTTP Request

PATCH /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PersistentVolumeClaim	OK
201 PersistentVolumeClaim	Created

Read Status

read status of the specified PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PersistentVolumeClaim	OK

Replace Status

replace status of the specified PersistentVolumeClaim

HTTP Request

PUT /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolumeClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolumeClaim

Response

Code	Description
200 PersistentVolumeClaim	OK
201 PersistentVolumeClaim	Created

StorageClass v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`StorageClass`

Appears In:

StorageClassList [storage/v1]

Field	Description
`allowVolumeExpansion` boolean	allowVolumeExpansion shows whether the storage class allow volume expand.
`allowedTopologies` TopologySelectorTerm array	allowedTopologies restrict the node topologies where volumes can be dynamically provisioned. Each volume plugin defines its own supported topology specifications. An empty TopologySelectorTerm list means there is no topology restriction. This field is only honored by servers that enable the VolumeScheduling feature.
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`mountOptions` string array	mountOptions controls the mountOptions for dynamically provisioned PersistentVolumes of this storage class. e.g. ["ro", "soft"]. Not validated - mount of the PVs will simply fail if one is invalid.
`parameters` object	parameters holds the parameters for the provisioner that should create volumes of this storage class.
`provisioner` string	provisioner indicates the type of the provisioner.
`reclaimPolicy` string	reclaimPolicy controls the reclaimPolicy for dynamically provisioned PersistentVolumes of this storage class. Defaults to Delete.
`volumeBindingMode` string	volumeBindingMode indicates how PersistentVolumeClaims should be provisioned and bound. When unset, VolumeBindingImmediate is used. This field is only honored by servers that enable the VolumeScheduling feature.

StorageClassList v1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` StorageClass array	items is the list of StorageClasses
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageClass

HTTP Request

POST /apis/storage.k8s.io/v1/storageclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageClass

Response

Code	Description
200 StorageClass	OK
201 StorageClass	Created
202 StorageClass	Accepted

Patch

partially update the specified StorageClass

HTTP Request

PATCH /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageClass	OK
201 StorageClass	Created

Replace

replace the specified StorageClass

HTTP Request

PUT /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageClass

Response

Code	Description
200 StorageClass	OK
201 StorageClass	Created

Delete

delete a StorageClass

HTTP Request

DELETE /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 StorageClass	OK
202 StorageClass	Accepted

Delete Collection

delete collection of StorageClass

HTTP Request

DELETE /apis/storage.k8s.io/v1/storageclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified StorageClass

HTTP Request

GET /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageClass	OK

List

list or watch objects of kind StorageClass

HTTP Request

GET /apis/storage.k8s.io/v1/storageclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StorageClassList	OK

Watch

watch changes to an object of kind StorageClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/storageclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of StorageClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/storageclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

StorageVersionMigration v1alpha1 storagemigration.k8s.io

Group	Version	Kind
`storagemigration.k8s.io`	`v1alpha1`	`StorageVersionMigration`

Appears In:

StorageVersionMigrationList [storagemigration/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` StorageVersionMigrationSpec	Specification of the migration.
`status` StorageVersionMigrationStatus	Status of the migration.

StorageVersionMigrationSpec v1alpha1 storagemigration

Appears In:

StorageVersionMigration [storagemigration/v1alpha1]

Field	Description
`continueToken` string	The token used in the list options to get the next chunk of objects to migrate. When the .status.conditions indicates the migration is "Running", users can use this token to check the progress of the migration.
`resource` GroupVersionResource	The resource that is being migrated. The migrator sends requests to the endpoint serving the resource. Immutable.

StorageVersionMigrationStatus v1alpha1 storagemigration

Appears In:

StorageVersionMigration [storagemigration/v1alpha1]

Field	Description
`conditions` MigrationCondition array patch strategy: merge patch merge key: type	The latest available observations of the migration's current state.
`resourceVersion` string	ResourceVersion to compare with the GC cache for performing the migration. This is the current resource version of given group, version and resource when kube-controller-manager first observes this StorageVersionMigration resource.

StorageVersionMigrationList v1alpha1 storagemigration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` StorageVersionMigration array patch strategy: merge patch merge key: type	Items is the list of StorageVersionMigration
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageVersionMigration

HTTP Request

POST /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created
202 StorageVersionMigration	Accepted

Patch

partially update the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Replace

replace the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Delete

delete a StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersionMigration	OK

List

list or watch objects of kind StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StorageVersionMigrationList	OK

Watch

watch changes to an object of kind StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Read Status

read status of the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersionMigration	OK

Replace Status

replace status of the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Volume v1 core

Group	Version	Kind
`core`	`v1`	`Volume`

Appears In:

PodSpec [core/v1]

Field	Description
`awsElasticBlockStore` AWSElasticBlockStoreVolumeSource	awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Deprecated: AWSElasticBlockStore is deprecated. All operations for the in-tree awsElasticBlockStore type are redirected to the ebs.csi.aws.com CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
`azureDisk` AzureDiskVolumeSource	azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod. Deprecated: AzureDisk is deprecated. All operations for the in-tree azureDisk type are redirected to the disk.csi.azure.com CSI driver.
`azureFile` AzureFileVolumeSource	azureFile represents an Azure File Service mount on the host and bind mount to the pod. Deprecated: AzureFile is deprecated. All operations for the in-tree azureFile type are redirected to the file.csi.azure.com CSI driver.
`cephfs` CephFSVolumeSource	cephFS represents a Ceph FS mount on the host that shares a pod's lifetime. Deprecated: CephFS is deprecated and the in-tree cephfs type is no longer supported.
`cinder` CinderVolumeSource	cinder represents a cinder volume attached and mounted on kubelets host machine. Deprecated: Cinder is deprecated. All operations for the in-tree cinder type are redirected to the cinder.csi.openstack.org CSI driver. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`configMap` ConfigMapVolumeSource	configMap represents a configMap that should populate this volume
`csi` CSIVolumeSource	csi (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers.
`downwardAPI` DownwardAPIVolumeSource	downwardAPI represents downward API about the pod that should populate this volume
`emptyDir` EmptyDirVolumeSource	emptyDir represents a temporary directory that shares a pod's lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
`ephemeral` EphemeralVolumeSource	ephemeral represents a volume that is handled by a cluster storage driver. The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, and deleted when the pod is removed. Use this if: a) the volume is only needed while the pod runs, b) features of normal volumes like restoring from snapshot or capacity tracking are needed, c) the storage driver is specified through a storage class, and d) the storage driver supports dynamic volume provisioning through a PersistentVolumeClaim (see EphemeralVolumeSource for more information on the connection between this volume type and PersistentVolumeClaim). Use PersistentVolumeClaim or one of the vendor-specific APIs for volumes that persist for longer than the lifecycle of an individual pod. Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to be used that way - see the documentation of the driver for more information. A pod can use both types of ephemeral volumes and persistent volumes at the same time.
`fc` FCVolumeSource	fc represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod.
`flexVolume` FlexVolumeSource	flexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin. Deprecated: FlexVolume is deprecated. Consider using a CSIDriver instead.
`flocker` FlockerVolumeSource	flocker represents a Flocker volume attached to a kubelet's host machine. This depends on the Flocker control service being running. Deprecated: Flocker is deprecated and the in-tree flocker type is no longer supported.
`gcePersistentDisk` GCEPersistentDiskVolumeSource	gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Deprecated: GCEPersistentDisk is deprecated. All operations for the in-tree gcePersistentDisk type are redirected to the pd.csi.storage.gke.io CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
`gitRepo` GitRepoVolumeSource	gitRepo represents a git repository at a particular revision. Deprecated: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.
`glusterfs` GlusterfsVolumeSource	glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. Deprecated: Glusterfs is deprecated and the in-tree glusterfs type is no longer supported. More info: https://examples.k8s.io/volumes/glusterfs/README.md
`hostPath` HostPathVolumeSource	hostPath represents a pre-existing file or directory on the host machine that is directly exposed to the container. This is generally used for system agents or other privileged things that are allowed to see the host machine. Most containers will NOT need this. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
`image` ImageVolumeSource	image represents an OCI object (a container image or artifact) pulled and mounted on the kubelet's host machine. The volume is resolved at pod startup depending on which PullPolicy value is provided: - Always: the kubelet always attempts to pull the reference. Container creation will fail If the pull fails. - Never: the kubelet never pulls the reference and only uses a local image or artifact. Container creation will fail if the reference isn't present. - IfNotPresent: the kubelet pulls if the reference isn't already present on disk. Container creation will fail if the reference isn't present and the pull fails. The volume gets re-resolved if the pod gets deleted and recreated, which means that new remote content will become available on pod recreation. A failure to resolve or pull the image during pod startup will block containers from starting and may add significant latency. Failures will be retried using normal volume backoff and will be reported on the pod reason and message. The types of objects that may be mounted by this volume are defined by the container runtime implementation on a host machine and at minimum must include all valid types supported by the container image field. The OCI object gets mounted in a single directory (spec.containers[].volumeMounts.mountPath) by merging the manifest layers in the same way as for container images. The volume will be mounted read-only (ro) and non-executable files (noexec). Sub path mounts for containers are not supported (spec.containers[].volumeMounts.subpath). The field spec.securityContext.fsGroupChangePolicy has no effect on this volume type.
`iscsi` ISCSIVolumeSource	iscsi represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md
`name` string	name of the volume. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`nfs` NFSVolumeSource	nfs represents an NFS mount on the host that shares a pod's lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
`persistentVolumeClaim` PersistentVolumeClaimVolumeSource	persistentVolumeClaimVolumeSource represents a reference to a PersistentVolumeClaim in the same namespace. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
`photonPersistentDisk` PhotonPersistentDiskVolumeSource	photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine. Deprecated: PhotonPersistentDisk is deprecated and the in-tree photonPersistentDisk type is no longer supported.
`portworxVolume` PortworxVolumeSource	portworxVolume represents a portworx volume attached and mounted on kubelets host machine. Deprecated: PortworxVolume is deprecated. All operations for the in-tree portworxVolume type are redirected to the pxd.portworx.com CSI driver when the CSIMigrationPortworx feature-gate is on.
`projected` ProjectedVolumeSource	projected items for all in one resources secrets, configmaps, and downward API
`quobyte` QuobyteVolumeSource	quobyte represents a Quobyte mount on the host that shares a pod's lifetime. Deprecated: Quobyte is deprecated and the in-tree quobyte type is no longer supported.
`rbd` RBDVolumeSource	rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. Deprecated: RBD is deprecated and the in-tree rbd type is no longer supported. More info: https://examples.k8s.io/volumes/rbd/README.md
`scaleIO` ScaleIOVolumeSource	scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes. Deprecated: ScaleIO is deprecated and the in-tree scaleIO type is no longer supported.
`secret` SecretVolumeSource	secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret
`storageos` StorageOSVolumeSource	storageOS represents a StorageOS volume attached and mounted on Kubernetes nodes. Deprecated: StorageOS is deprecated and the in-tree storageos type is no longer supported.
`vsphereVolume` VsphereVirtualDiskVolumeSource	vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine. Deprecated: VsphereVolume is deprecated. All operations for the in-tree vsphereVolume type are redirected to the csi.vsphere.vmware.com CSI driver.

VolumeAttachment v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`VolumeAttachment`

Appears In:

VolumeAttachmentList [storage/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` VolumeAttachmentSpec	spec represents specification of the desired attach/detach volume behavior. Populated by the Kubernetes system.
`status` VolumeAttachmentStatus	status represents status of the VolumeAttachment request. Populated by the entity completing the attach or detach operation, i.e. the external-attacher.

VolumeAttachmentSpec v1 storage

Appears In:

VolumeAttachment [storage/v1]

Field	Description
`attacher` string	attacher indicates the name of the volume driver that MUST handle this request. This is the name returned by GetPluginName().
`nodeName` string	nodeName represents the node that the volume should be attached to.
`source` VolumeAttachmentSource	source represents the volume that should be attached.

VolumeAttachmentStatus v1 storage

Appears In:

VolumeAttachment [storage/v1]

Field	Description
`attachError` VolumeError	attachError represents the last error encountered during attach operation, if any. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
`attached` boolean	attached indicates the volume is successfully attached. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
`attachmentMetadata` object	attachmentMetadata is populated with any information returned by the attach operation, upon successful attach, that must be passed into subsequent WaitForAttach or Mount calls. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
`detachError` VolumeError	detachError represents the last error encountered during detach operation, if any. This field must only be set by the entity completing the detach operation, i.e. the external-attacher.

VolumeAttachmentList v1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` VolumeAttachment array	items is the list of VolumeAttachments
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a VolumeAttachment

HTTP Request

POST /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttachment

Response

Code	Description
200 VolumeAttachment	OK
201 VolumeAttachment	Created
202 VolumeAttachment	Accepted

Patch

partially update the specified VolumeAttachment

HTTP Request

PATCH /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 VolumeAttachment	OK
201 VolumeAttachment	Created

Replace

replace the specified VolumeAttachment

HTTP Request

PUT /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttachment

Response

Code	Description
200 VolumeAttachment	OK
201 VolumeAttachment	Created

Delete

delete a VolumeAttachment

HTTP Request

DELETE /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 VolumeAttachment	OK
202 VolumeAttachment	Accepted

Delete Collection

delete collection of VolumeAttachment

HTTP Request

DELETE /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 VolumeAttachment	OK

List

list or watch objects of kind VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 VolumeAttachmentList	OK

Watch

watch changes to an object of kind VolumeAttachment. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/volumeattachments/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of VolumeAttachment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/volumeattachments

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified VolumeAttachment

HTTP Request

PATCH /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 VolumeAttachment	OK
201 VolumeAttachment	Created

Read Status

read status of the specified VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 VolumeAttachment	OK

Replace Status

replace status of the specified VolumeAttachment

HTTP Request

PUT /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

Parameter	Description
`name`	name of the VolumeAttachment

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttachment

Response

Code	Description
200 VolumeAttachment	OK
201 VolumeAttachment	Created

VolumeAttributesClass v1beta1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1beta1`	`VolumeAttributesClass`

Other API versions of this object exist: v1alpha1

Appears In:

VolumeAttributesClassList [storage/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`driverName` string	Name of the CSI driver This field is immutable.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`parameters` object	parameters hold volume attributes defined by the CSI driver. These values are opaque to the Kubernetes and are passed directly to the CSI driver. The underlying storage provider supports changing these attributes on an existing volume, however the parameters field itself is immutable. To invoke a volume update, a new VolumeAttributesClass should be created with new parameters, and the PersistentVolumeClaim should be updated to reference the new VolumeAttributesClass. This field is required and must contain at least one key/value pair. The keys cannot be empty, and the maximum number of parameters is 512, with a cumulative max size of 256K. If the CSI driver rejects invalid parameters, the target PersistentVolumeClaim will be set to an "Infeasible" state in the modifyVolumeStatus field.

VolumeAttributesClassList v1beta1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` VolumeAttributesClass array	items is the list of VolumeAttributesClass objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a VolumeAttributesClass

HTTP Request

POST /apis/storage.k8s.io/v1beta1/volumeattributesclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttributesClass

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created
202 VolumeAttributesClass	Accepted

Patch

partially update the specified VolumeAttributesClass

HTTP Request

PATCH /apis/storage.k8s.io/v1beta1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created

Replace

replace the specified VolumeAttributesClass

HTTP Request

PUT /apis/storage.k8s.io/v1beta1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttributesClass

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created

Delete

delete a VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1beta1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 VolumeAttributesClass	OK
202 VolumeAttributesClass	Accepted

Delete Collection

delete collection of VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1beta1/volumeattributesclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1beta1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 VolumeAttributesClass	OK

List

list or watch objects of kind VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1beta1/volumeattributesclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 VolumeAttributesClassList	OK

Watch

watch changes to an object of kind VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1beta1/watch/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1beta1/watch/volumeattributesclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Metadata

Metadata resources are responsible for configuring behavior of your other Resources within the Cluster.

Common resource types:

HorizontalPodAutoscaler (HPA) for automatically scaling the replicacount of your workloads in response to load.
PodDisruptionBudget for configuring how many replicas in a given workload maybe made concurrently unavailable when performing maintenance.
Event for notification of resource lifecycle events in the cluster.

ClusterTrustBundle v1alpha1 certificates.k8s.io

Group	Version	Kind
`certificates.k8s.io`	`v1alpha1`	`ClusterTrustBundle`

Appears In:

ClusterTrustBundleList [certificates/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	metadata contains the object metadata.
`spec` ClusterTrustBundleSpec	spec contains the signer (if any) and trust anchors.

ClusterTrustBundleSpec v1alpha1 certificates

Appears In:

ClusterTrustBundle [certificates/v1alpha1]

Field Description

signerName
string signerName indicates the associated signer, if any. In order to create or update a ClusterTrustBundle that sets signerName, you must have the following cluster-scoped permission: group=certificates.k8s.io resource=signers resourceName=<the signer name> verb=attest. If signerName is not empty, then the ClusterTrustBundle object must be named with the signer name as a prefix (translating slashes to colons). For example, for the signer name `example.com/foo`, valid ClusterTrustBundle object names include `example.com:foo:abc` and `example.com:foo:v1`. If signerName is empty, then the ClusterTrustBundle object's name must not have such a prefix. List/watch requests for ClusterTrustBundles can filter on this field using a `spec.signerName=NAME` field selector.

trustBundle
string trustBundle contains the individual X.509 trust anchors for this bundle, as PEM bundle of PEM-wrapped, DER-formatted X.509 certificates. The data must consist only of PEM certificate blocks that parse as valid X.509 certificates. Each certificate must include a basic constraints extension with the CA bit set. The API server will reject objects that contain duplicate certificates, or that use PEM block headers. Users of ClusterTrustBundles, including Kubelet, are free to reorder and deduplicate certificate blocks in this file according to their own logic, as well as to drop PEM block headers and inter-block data.

ClusterTrustBundleList v1alpha1 certificates

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ClusterTrustBundle array	items is a collection of ClusterTrustBundle objects
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	metadata contains the list metadata.

Write Operations

Create

create a ClusterTrustBundle

HTTP Request

POST /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterTrustBundle

Response

Code	Description
200 ClusterTrustBundle	OK
201 ClusterTrustBundle	Created
202 ClusterTrustBundle	Accepted

Patch

partially update the specified ClusterTrustBundle

HTTP Request

PATCH /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterTrustBundle

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ClusterTrustBundle	OK
201 ClusterTrustBundle	Created

Replace

replace the specified ClusterTrustBundle

HTTP Request

PUT /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterTrustBundle

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterTrustBundle

Response

Code	Description
200 ClusterTrustBundle	OK
201 ClusterTrustBundle	Created

Delete

delete a ClusterTrustBundle

HTTP Request

DELETE /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterTrustBundle

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ClusterTrustBundle

HTTP Request

DELETE /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ClusterTrustBundle

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterTrustBundle

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ClusterTrustBundle	OK

List

list or watch objects of kind ClusterTrustBundle

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ClusterTrustBundleList	OK

Watch

watch changes to an object of kind ClusterTrustBundle. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/watch/clustertrustbundles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterTrustBundle

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ClusterTrustBundle. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/watch/clustertrustbundles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ControllerRevision v1 apps

Group	Version	Kind
`apps`	`v1`	`ControllerRevision`

Appears In:

ControllerRevisionList [apps/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`data`	Data is the serialized representation of the state.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`revision` integer	Revision indicates the revision of the state represented by Data.

ControllerRevisionList v1 apps

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ControllerRevision array	Items is the list of ControllerRevisions
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ControllerRevision

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ControllerRevision

Response

Code	Description
200 ControllerRevision	OK
201 ControllerRevision	Created
202 ControllerRevision	Accepted

Patch

partially update the specified ControllerRevision

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

Parameter	Description
`name`	name of the ControllerRevision
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ControllerRevision	OK
201 ControllerRevision	Created

Replace

replace the specified ControllerRevision

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

Parameter	Description
`name`	name of the ControllerRevision
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ControllerRevision

Response

Code	Description
200 ControllerRevision	OK
201 ControllerRevision	Created

Delete

delete a ControllerRevision

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

Parameter	Description
`name`	name of the ControllerRevision
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ControllerRevision

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ControllerRevision

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

Parameter	Description
`name`	name of the ControllerRevision
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ControllerRevision	OK

List

list or watch objects of kind ControllerRevision

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ControllerRevisionList	OK

List All Namespaces

list or watch objects of kind ControllerRevision

HTTP Request

GET /apis/apps/v1/controllerrevisions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ControllerRevisionList	OK

Watch

watch changes to an object of kind ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

Parameter	Description
`name`	name of the ControllerRevision
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/controllerrevisions

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/controllerrevisions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

CustomResourceDefinition v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceDefinition`

Appears In:

CustomResourceDefinitionList [apiextensions/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` CustomResourceDefinitionSpec	spec describes how the user wants the resources to appear
`status` CustomResourceDefinitionStatus	status indicates the actual state of the CustomResourceDefinition

CustomResourceDefinitionSpec v1 apiextensions

Appears In:

CustomResourceDefinition [apiextensions/v1]

Field	Description
`conversion` CustomResourceConversion	conversion defines conversion settings for the CRD.
`group` string	group is the API group of the defined custom resource. The custom resources are served under `/apis/<group>/...`. Must match the name of the CustomResourceDefinition (in the form `<names.plural>.<group>`).
`names` CustomResourceDefinitionNames	names specify the resource and kind names for the custom resource.
`preserveUnknownFields` boolean	preserveUnknownFields indicates that object fields which are not specified in the OpenAPI schema should be preserved when persisting to storage. apiVersion, kind, metadata and known fields inside metadata are always preserved. This field is deprecated in favor of setting `x-preserve-unknown-fields` to true in `spec.versions[*].schema.openAPIV3Schema`. See https://kubernetes.io/docs/tasks/extend-kubernetes/custom-resources/custom-resource-definitions/#field-pruning for details.
`scope` string	scope indicates whether the defined custom resource is cluster- or namespace-scoped. Allowed values are `Cluster` and `Namespaced`.
`versions` CustomResourceDefinitionVersion array	versions is the list of all API versions of the defined custom resource. Version names are used to compute the order in which served versions are listed in API discovery. If the version string is "kube-like", it will sort above non "kube-like" version strings, which are ordered lexicographically. "Kube-like" versions start with a "v", then are followed by a number (the major version), then optionally the string "alpha" or "beta" and another number (the minor version). These are sorted first by GA > beta > alpha (where GA is a version with no suffix such as beta or alpha), and then by comparing major version, then minor version. An example sorted list of versions: v10, v2, v1, v11beta2, v10beta3, v3beta1, v12alpha1, v11alpha2, foo1, foo10.

CustomResourceDefinitionStatus v1 apiextensions

Appears In:

CustomResourceDefinition [apiextensions/v1]

Field	Description
`acceptedNames` CustomResourceDefinitionNames	acceptedNames are the names that are actually being used to serve discovery. They may be different than the names in spec.
`conditions` CustomResourceDefinitionCondition array	conditions indicate state for particular aspects of a CustomResourceDefinition
`storedVersions` string array	storedVersions lists all versions of CustomResources that were ever persisted. Tracking these versions allows a migration path for stored versions in etcd. The field is mutable so a migration controller can finish a migration to another version (ensuring no old objects are left in storage), and then remove the rest of the versions from this list. Versions may not be removed from `spec.versions` while they exist in this list.

CustomResourceDefinitionList v1 apiextensions

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CustomResourceDefinition array	items list individual CustomResourceDefinition objects
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CustomResourceDefinition

HTTP Request

POST /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CustomResourceDefinition

Response

Code	Description
200 CustomResourceDefinition	OK
201 CustomResourceDefinition	Created
202 CustomResourceDefinition	Accepted

Patch

partially update the specified CustomResourceDefinition

HTTP Request

PATCH /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CustomResourceDefinition	OK
201 CustomResourceDefinition	Created

Replace

replace the specified CustomResourceDefinition

HTTP Request

PUT /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CustomResourceDefinition

Response

Code	Description
200 CustomResourceDefinition	OK
201 CustomResourceDefinition	Created

Delete

delete a CustomResourceDefinition

HTTP Request

DELETE /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of CustomResourceDefinition

HTTP Request

DELETE /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CustomResourceDefinition	OK

List

list or watch objects of kind CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CustomResourceDefinitionList	OK

Watch

watch changes to an object of kind CustomResourceDefinition. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apiextensions.k8s.io/v1/watch/customresourcedefinitions/{name}

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CustomResourceDefinition. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apiextensions.k8s.io/v1/watch/customresourcedefinitions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified CustomResourceDefinition

HTTP Request

PATCH /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CustomResourceDefinition	OK
201 CustomResourceDefinition	Created

Read Status

read status of the specified CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CustomResourceDefinition	OK

Replace Status

replace status of the specified CustomResourceDefinition

HTTP Request

PUT /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CustomResourceDefinition

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CustomResourceDefinition

Response

Code	Description
200 CustomResourceDefinition	OK
201 CustomResourceDefinition	Created

DeviceClass v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceClass`

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClassList [resource/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` DeviceClassSpec	Spec defines what can be allocated and how to configure it. This is mutable. Consumers have to be prepared for classes changing at any time, either because they get updated or replaced. Claim allocations are done once based on whatever was set in classes at the time of allocation. Changing the spec automatically increments the metadata.generation number.

DeviceClassSpec v1beta1 resource

Appears In:

DeviceClass [resource/v1beta1]

Field	Description
`config` DeviceClassConfiguration array	Config defines configuration parameters that apply to each device that is claimed via this class. Some classses may potentially be satisfied by multiple drivers, so each instance of a vendor configuration applies to exactly one driver. They are passed to the driver, but are not considered while allocating the claim.
`selectors` DeviceSelector array	Each selector must be satisfied by a device which is claimed via this class.

DeviceClassList v1beta1 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` DeviceClass array	Items is the list of resource classes.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a DeviceClass

HTTP Request

POST /apis/resource.k8s.io/v1beta1/deviceclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DeviceClass

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created
202 DeviceClass	Accepted

Patch

partially update the specified DeviceClass

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created

Replace

replace the specified DeviceClass

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DeviceClass

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created

Delete

delete a DeviceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 DeviceClass	OK
202 DeviceClass	Accepted

Delete Collection

delete collection of DeviceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/deviceclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified DeviceClass

HTTP Request

GET /apis/resource.k8s.io/v1beta1/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 DeviceClass	OK

List

list or watch objects of kind DeviceClass

HTTP Request

GET /apis/resource.k8s.io/v1beta1/deviceclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DeviceClassList	OK

Watch

watch changes to an object of kind DeviceClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of DeviceClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/deviceclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Event v1 events.k8s.io

Group	Version	Kind
`events.k8s.io`	`v1`	`Event`

Appears In:

EventList [events/v1]

Field	Description
`action` string	action is what action was taken/failed regarding to the regarding object. It is machine-readable. This field cannot be empty for new Events and it can have at most 128 characters.
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`deprecatedCount` integer	deprecatedCount is the deprecated field assuring backward compatibility with core.v1 Event type.
`deprecatedFirstTimestamp` Time	deprecatedFirstTimestamp is the deprecated field assuring backward compatibility with core.v1 Event type.
`deprecatedLastTimestamp` Time	deprecatedLastTimestamp is the deprecated field assuring backward compatibility with core.v1 Event type.
`deprecatedSource` EventSource	deprecatedSource is the deprecated field assuring backward compatibility with core.v1 Event type.
`eventTime` MicroTime	eventTime is the time when this Event was first observed. It is required.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`note` string	note is a human-readable description of the status of this operation. Maximal length of the note is 1kB, but libraries should be prepared to handle values up to 64kB.
`reason` string	reason is why the action was taken. It is human-readable. This field cannot be empty for new Events and it can have at most 128 characters.
`regarding` ObjectReference	regarding contains the object this Event is about. In most cases it's an Object reporting controller implements, e.g. ReplicaSetController implements ReplicaSets and this event is emitted because it acts on some changes in a ReplicaSet object.
`related` ObjectReference	related is the optional secondary object for more complex actions. E.g. when regarding object triggers a creation or deletion of related object.
`reportingController` string	reportingController is the name of the controller that emitted this Event, e.g. `kubernetes.io/kubelet`. This field cannot be empty for new Events.
`reportingInstance` string	reportingInstance is the ID of the controller instance, e.g. `kubelet-xyzf`. This field cannot be empty for new Events and it can have at most 128 characters.
`series` EventSeries	series is data about the Event series this event represents or nil if it's a singleton Event.
`type` string	type is the type of this event (Normal, Warning), new types could be added in the future. It is machine-readable. This field cannot be empty for new Events.

EventList v1 events

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Event array	items is a list of schema objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an Event

HTTP Request

POST /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Event

Response

Code	Description
200 Event	OK
201 Event	Created
202 Event	Accepted

Patch

partially update the specified Event

HTTP Request

PATCH /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Event	OK
201 Event	Created

Replace

replace the specified Event

HTTP Request

PUT /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Event

Response

Code	Description
200 Event	OK
201 Event	Created

Delete

delete an Event

HTTP Request

DELETE /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Event

HTTP Request

DELETE /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Event

HTTP Request

GET /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Event	OK

List

list or watch objects of kind Event

HTTP Request

GET /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EventList	OK

List All Namespaces

list or watch objects of kind Event

HTTP Request

GET /apis/events.k8s.io/v1/events

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EventList	OK

Watch

watch changes to an object of kind Event. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/events.k8s.io/v1/watch/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/events.k8s.io/v1/watch/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/events.k8s.io/v1/watch/events

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

LimitRange v1 core

Group	Version	Kind
`core`	`v1`	`LimitRange`

Appears In:

LimitRangeList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` LimitRangeSpec	Spec defines the limits enforced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

LimitRangeSpec v1 core

Appears In:

LimitRange [core/v1]

Field	Description
`limits` LimitRangeItem array	Limits is the list of LimitRangeItem objects that are enforced.

LimitRangeList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` LimitRange array	Items is a list of LimitRange objects. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a LimitRange

HTTP Request

POST /api/v1/namespaces/{namespace}/limitranges

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` LimitRange

Response

Code	Description
200 LimitRange	OK
201 LimitRange	Created
202 LimitRange	Accepted

Patch

partially update the specified LimitRange

HTTP Request

PATCH /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

Parameter	Description
`name`	name of the LimitRange
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 LimitRange	OK
201 LimitRange	Created

Replace

replace the specified LimitRange

HTTP Request

PUT /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

Parameter	Description
`name`	name of the LimitRange
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` LimitRange

Response

Code	Description
200 LimitRange	OK
201 LimitRange	Created

Delete

delete a LimitRange

HTTP Request

DELETE /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

Parameter	Description
`name`	name of the LimitRange
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of LimitRange

HTTP Request

DELETE /api/v1/namespaces/{namespace}/limitranges

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified LimitRange

HTTP Request

GET /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

Parameter	Description
`name`	name of the LimitRange
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 LimitRange	OK

List

list or watch objects of kind LimitRange

HTTP Request

GET /api/v1/namespaces/{namespace}/limitranges

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LimitRangeList	OK

List All Namespaces

list or watch objects of kind LimitRange

HTTP Request

GET /api/v1/limitranges

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LimitRangeList	OK

Watch

watch changes to an object of kind LimitRange. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/limitranges/{name}

Path Parameters

Parameter	Description
`name`	name of the LimitRange
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of LimitRange. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/limitranges

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of LimitRange. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/limitranges

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

HorizontalPodAutoscaler v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`HorizontalPodAutoscaler`

Other API versions of this object exist: v1

Appears In:

HorizontalPodAutoscalerList [autoscaling/v2]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	metadata is the standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` HorizontalPodAutoscalerSpec	spec is the specification for the behaviour of the autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
`status` HorizontalPodAutoscalerStatus	status is the current information about the autoscaler.

HorizontalPodAutoscalerSpec v2 autoscaling

Appears In:

HorizontalPodAutoscaler [autoscaling/v2]

Field	Description
`behavior` HorizontalPodAutoscalerBehavior	behavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively). If not set, the default HPAScalingRules for scale up and scale down are used.
`maxReplicas` integer	maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
`metrics` MetricSpec array	metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used). The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods. Ergo, metrics used must decrease as the pod count is increased, and vice-versa. See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
`minReplicas` integer	minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down. It defaults to 1 pod. minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured. Scaling is active as long as at least one metric value is available.
`scaleTargetRef` CrossVersionObjectReference	scaleTargetRef points to the target resource to scale, and is used to the pods for which metrics should be collected, as well as to actually change the replica count.

HorizontalPodAutoscalerStatus v2 autoscaling

Appears In:

HorizontalPodAutoscaler [autoscaling/v2]

Field	Description
`conditions` HorizontalPodAutoscalerCondition array patch strategy: merge patch merge key: type	conditions is the set of conditions required for this autoscaler to scale its target, and indicates whether or not those conditions are met.
`currentMetrics` MetricStatus array	currentMetrics is the last read state of the metrics used by this autoscaler.
`currentReplicas` integer	currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
`desiredReplicas` integer	desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
`lastScaleTime` Time	lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
`observedGeneration` integer	observedGeneration is the most recent generation observed by this autoscaler.

HorizontalPodAutoscalerList v2 autoscaling

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` HorizontalPodAutoscaler array	items is the list of horizontal pod autoscaler objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	metadata is the standard list metadata.

Write Operations

Create

create a HorizontalPodAutoscaler

HTTP Request

POST /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created
202 HorizontalPodAutoscaler	Accepted

Patch

partially update the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Replace

replace the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Delete

delete a HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 HorizontalPodAutoscaler	OK

List

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 HorizontalPodAutoscalerList	OK

List All Namespaces

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/horizontalpodautoscalers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 HorizontalPodAutoscalerList	OK

Watch

watch changes to an object of kind HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/autoscaling/v2/watch/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v2/watch/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v2/watch/horizontalpodautoscalers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Read Status

read status of the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 HorizontalPodAutoscaler	OK

Replace Status

replace status of the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

MutatingWebhookConfiguration v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`MutatingWebhookConfiguration`

Appears In:

MutatingWebhookConfigurationList [admissionregistration/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`webhooks` MutatingWebhook array patch strategy: merge patch merge key: name	Webhooks is a list of webhooks and the affected resources and operations.

MutatingWebhookConfigurationList v1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` MutatingWebhookConfiguration array	List of MutatingWebhookConfiguration.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a MutatingWebhookConfiguration

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingWebhookConfiguration

Response

Code	Description
200 MutatingWebhookConfiguration	OK
201 MutatingWebhookConfiguration	Created
202 MutatingWebhookConfiguration	Accepted

Patch

partially update the specified MutatingWebhookConfiguration

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 MutatingWebhookConfiguration	OK
201 MutatingWebhookConfiguration	Created

Replace

replace the specified MutatingWebhookConfiguration

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingWebhookConfiguration

Response

Code	Description
200 MutatingWebhookConfiguration	OK
201 MutatingWebhookConfiguration	Created

Delete

delete a MutatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of MutatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified MutatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingWebhookConfiguration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 MutatingWebhookConfiguration	OK

List

list or watch objects of kind MutatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 MutatingWebhookConfigurationList	OK

Watch

watch changes to an object of kind MutatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/mutatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingWebhookConfiguration

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of MutatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/mutatingwebhookconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

PodTemplate v1 core

Group	Version	Kind
`core`	`v1`	`PodTemplate`

Appears In:

PodTemplateList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`template` PodTemplateSpec	Template defines the pods that will be created from this pod template. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodTemplateSpec v1 core

Appears In:

DaemonSetSpec [apps/v1]
DeploymentSpec [apps/v1]
JobSpec [batch/v1]
PodTemplate [core/v1]
ReplicaSetSpec [apps/v1]
ReplicationControllerSpec [core/v1]
StatefulSetSpec [apps/v1]

Field	Description
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PodSpec	Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodTemplateList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PodTemplate array	List of pod templates
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PodTemplate

HTTP Request

POST /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PodTemplate

Response

Code	Description
200 PodTemplate	OK
201 PodTemplate	Created
202 PodTemplate	Accepted

Patch

partially update the specified PodTemplate

HTTP Request

PATCH /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the PodTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PodTemplate	OK
201 PodTemplate	Created

Replace

replace the specified PodTemplate

HTTP Request

PUT /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the PodTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PodTemplate

Response

Code	Description
200 PodTemplate	OK
201 PodTemplate	Created

Delete

delete a PodTemplate

HTTP Request

DELETE /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the PodTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 PodTemplate	OK
202 PodTemplate	Accepted

Delete Collection

delete collection of PodTemplate

HTTP Request

DELETE /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PodTemplate

HTTP Request

GET /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the PodTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PodTemplate	OK

List

list or watch objects of kind PodTemplate

HTTP Request

GET /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodTemplateList	OK

List All Namespaces

list or watch objects of kind PodTemplate

HTTP Request

GET /api/v1/podtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodTemplateList	OK

Watch

watch changes to an object of kind PodTemplate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/podtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the PodTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PodTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/podtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of PodTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/podtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

PodDisruptionBudget v1 policy

Group	Version	Kind
`policy`	`v1`	`PodDisruptionBudget`

Appears In:

PodDisruptionBudgetList [policy/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PodDisruptionBudgetSpec	Specification of the desired behavior of the PodDisruptionBudget.
`status` PodDisruptionBudgetStatus	Most recently observed status of the PodDisruptionBudget.

PodDisruptionBudgetSpec v1 policy

Appears In:

PodDisruptionBudget [policy/v1]

Field	Description
`maxUnavailable`	An eviction is allowed if at most "maxUnavailable" pods selected by "selector" are unavailable after the eviction, i.e. even in absence of the evicted pod. For example, one can prevent all voluntary evictions by specifying 0. This is a mutually exclusive setting with "minAvailable".
`minAvailable`	An eviction is allowed if at least "minAvailable" pods selected by "selector" will still be available after the eviction, i.e. even in the absence of the evicted pod. So for example you can prevent all voluntary evictions by specifying "100%".
`selector` LabelSelector patch strategy: replace	Label query over pods whose evictions are managed by the disruption budget. A null selector will match no pods, while an empty ({}) selector will select all pods within the namespace.
`unhealthyPodEvictionPolicy` string	UnhealthyPodEvictionPolicy defines the criteria for when unhealthy pods should be considered for eviction. Current implementation considers healthy pods, as pods that have status.conditions item with type="Ready",status="True". Valid policies are IfHealthyBudget and AlwaysAllow. If no policy is specified, the default behavior will be used, which corresponds to the IfHealthyBudget policy. IfHealthyBudget policy means that running pods (status.phase="Running"), but not yet healthy can be evicted only if the guarded application is not disrupted (status.currentHealthy is at least equal to status.desiredHealthy). Healthy pods will be subject to the PDB for eviction. AlwaysAllow policy means that all running pods (status.phase="Running"), but not yet healthy are considered disrupted and can be evicted regardless of whether the criteria in a PDB is met. This means perspective running pods of a disrupted application might not get a chance to become healthy. Healthy pods will be subject to the PDB for eviction. Additional policies may be added in the future. Clients making eviction decisions should disallow eviction of unhealthy pods if they encounter an unrecognized policy in this field. This field is beta-level. The eviction API uses this field when the feature gate PDBUnhealthyPodEvictionPolicy is enabled (enabled by default).

PodDisruptionBudgetStatus v1 policy

Appears In:

PodDisruptionBudget [policy/v1]

Field	Description
`conditions` Condition array patch strategy: merge patch merge key: type	Conditions contain conditions for PDB. The disruption controller sets the DisruptionAllowed condition. The following are known values for the reason field (additional reasons could be added in the future): - SyncFailed: The controller encountered an error and wasn't able to compute the number of allowed disruptions. Therefore no disruptions are allowed and the status of the condition will be False. - InsufficientPods: The number of pods are either at or below the number required by the PodDisruptionBudget. No disruptions are allowed and the status of the condition will be False. - SufficientPods: There are more pods than required by the PodDisruptionBudget. The condition will be True, and the number of allowed disruptions are provided by the disruptionsAllowed property.
`currentHealthy` integer	current number of healthy pods
`desiredHealthy` integer	minimum desired number of healthy pods
`disruptedPods` object	DisruptedPods contains information about pods whose eviction was processed by the API server eviction subresource handler but has not yet been observed by the PodDisruptionBudget controller. A pod will be in this map from the time when the API server processed the eviction request to the time when the pod is seen by PDB controller as having been marked for deletion (or after a timeout). The key in the map is the name of the pod and the value is the time when the API server processed the eviction request. If the deletion didn't occur and a pod is still there it will be removed from the list automatically by PodDisruptionBudget controller after some time. If everything goes smooth this map should be empty for the most of the time. Large number of entries in the map may indicate problems with pod deletions.
`disruptionsAllowed` integer	Number of pod disruptions that are currently allowed.
`expectedPods` integer	total number of pods counted by this disruption budget
`observedGeneration` integer	Most recent generation observed when updating this PDB status. DisruptionsAllowed and other status information is valid only if observedGeneration equals to PDB's object generation.

PodDisruptionBudgetList v1 policy

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PodDisruptionBudget array	Items is a list of PodDisruptionBudgets
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PodDisruptionBudget

HTTP Request

POST /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PodDisruptionBudget

Response

Code	Description
200 PodDisruptionBudget	OK
201 PodDisruptionBudget	Created
202 PodDisruptionBudget	Accepted

Patch

partially update the specified PodDisruptionBudget

HTTP Request

PATCH /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PodDisruptionBudget	OK
201 PodDisruptionBudget	Created

Replace

replace the specified PodDisruptionBudget

HTTP Request

PUT /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PodDisruptionBudget

Response

Code	Description
200 PodDisruptionBudget	OK
201 PodDisruptionBudget	Created

Delete

delete a PodDisruptionBudget

HTTP Request

DELETE /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of PodDisruptionBudget

HTTP Request

DELETE /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PodDisruptionBudget	OK

List

list or watch objects of kind PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodDisruptionBudgetList	OK

List All Namespaces

list or watch objects of kind PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/poddisruptionbudgets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PodDisruptionBudgetList	OK

Watch

watch changes to an object of kind PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/policy/v1/watch/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/policy/v1/watch/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/policy/v1/watch/poddisruptionbudgets

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified PodDisruptionBudget

HTTP Request

PATCH /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PodDisruptionBudget	OK
201 PodDisruptionBudget	Created

Read Status

read status of the specified PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PodDisruptionBudget	OK

Replace Status

replace status of the specified PodDisruptionBudget

HTTP Request

PUT /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PodDisruptionBudget
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PodDisruptionBudget

Response

Code	Description
200 PodDisruptionBudget	OK
201 PodDisruptionBudget	Created

PriorityClass v1 scheduling.k8s.io

Group	Version	Kind
`scheduling.k8s.io`	`v1`	`PriorityClass`

Appears In:

PriorityClassList [scheduling/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`description` string	description is an arbitrary string that usually provides guidelines on when this priority class should be used.
`globalDefault` boolean	globalDefault specifies whether this PriorityClass should be considered as the default priority for pods that do not have any priority class. Only one PriorityClass can be marked as `globalDefault`. However, if more than one PriorityClasses exists with their `globalDefault` field set to true, the smallest value of such global default PriorityClasses will be used as the default priority.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`preemptionPolicy` string	preemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.
`value` integer	value represents the integer value of this priority class. This is the actual priority that pods receive when they have the name of this class in their pod spec.

PriorityClassList v1 scheduling

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PriorityClass array	items is the list of PriorityClasses
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PriorityClass

HTTP Request

POST /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PriorityClass

Response

Code	Description
200 PriorityClass	OK
201 PriorityClass	Created
202 PriorityClass	Accepted

Patch

partially update the specified PriorityClass

HTTP Request

PATCH /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PriorityClass	OK
201 PriorityClass	Created

Replace

replace the specified PriorityClass

HTTP Request

PUT /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PriorityClass

Response

Code	Description
200 PriorityClass	OK
201 PriorityClass	Created

Delete

delete a PriorityClass

HTTP Request

DELETE /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of PriorityClass

HTTP Request

DELETE /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PriorityClass

HTTP Request

GET /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PriorityClass	OK

List

list or watch objects of kind PriorityClass

HTTP Request

GET /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PriorityClassList	OK

Watch

watch changes to an object of kind PriorityClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/scheduling.k8s.io/v1/watch/priorityclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PriorityClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/scheduling.k8s.io/v1/watch/priorityclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ResourceClaim v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourceClaim`

Other API versions of this object exist: v1 v1alpha3

Appears In:

ResourceClaimList [resource/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceClaimSpec	Spec describes what is being requested and how to configure it. The spec is immutable.
`status` ResourceClaimStatus	Status describes whether the claim is ready to use and what has been allocated.

ResourceClaimSpec v1beta1 resource

Appears In:

ResourceClaim [resource/v1beta1]
ResourceClaimTemplateSpec [resource/v1beta1]

Field	Description
`devices` DeviceClaim	Devices defines how to request devices.

ResourceClaimStatus v1beta1 resource

Appears In:

ResourceClaim [resource/v1beta1]

Field	Description
`allocation` AllocationResult	Allocation is set once the claim has been allocated successfully.
`devices` AllocatedDeviceStatus array	Devices contains the status of each device allocated for this claim, as reported by the driver. This can include driver-specific information. Entries are owned by their respective drivers.
`reservedFor` ResourceClaimConsumerReference array patch strategy: merge patch merge key: uid	ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. A claim that is in use or might be in use because it has been reserved must not get deallocated. In a cluster with multiple scheduler instances, two pods might get scheduled concurrently by different schedulers. When they reference the same ResourceClaim which already has reached its maximum number of consumers, only one pod can be scheduled. Both schedulers try to add their pod to the claim.status.reservedFor field, but only the update that reaches the API server first gets stored. The other one fails with an error and the scheduler which issued it knows that it must put the pod back into the queue, waiting for the ResourceClaim to become usable again. There can be at most 32 such reservations. This may get increased in the future, but not reduced.

ResourceClaimList v1beta1 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceClaim array	Items is the list of resource claims.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceClaim

HTTP Request

POST /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created
202 ResourceClaim	Accepted

Patch

partially update the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Replace

replace the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Delete

delete a ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceClaim	OK
202 ResourceClaim	Accepted

Delete Collection

delete collection of ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

List

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

List All Namespaces

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

Watch

watch changes to an object of kind ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Read Status

read status of the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

Replace Status

replace status of the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

ResourceClaimTemplate v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourceClaimTemplate`

Other API versions of this object exist: v1alpha3

Appears In:

ResourceClaimTemplateList [resource/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceClaimTemplateSpec	Describes the ResourceClaim that is to be generated. This field is immutable. A ResourceClaim will get created by the control plane for a Pod when needed and then not get updated anymore.

ResourceClaimTemplateSpec v1beta1 resource

Appears In:

ResourceClaimTemplate [resource/v1beta1]

Field	Description
`metadata` ObjectMeta	ObjectMeta may contain labels and annotations that will be copied into the ResourceClaim when creating it. No other fields are allowed and will be rejected during validation.
`spec` ResourceClaimSpec	Spec for the ResourceClaim. The entire content is copied unchanged into the ResourceClaim that gets created from this template. The same fields as in a ResourceClaim are also valid here.

ResourceClaimTemplateList v1beta1 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceClaimTemplate array	Items is the list of resource claim templates.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceClaimTemplate

HTTP Request

POST /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaimTemplate

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created
202 ResourceClaimTemplate	Accepted

Patch

partially update the specified ResourceClaimTemplate

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created

Replace

replace the specified ResourceClaimTemplate

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaimTemplate

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created

Delete

delete a ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceClaimTemplate	OK
202 ResourceClaimTemplate	Accepted

Delete Collection

delete collection of ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaimTemplate	OK

List

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimTemplateList	OK

List All Namespaces

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1beta1/resourceclaimtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimTemplateList	OK

Watch

watch changes to an object of kind ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/resourceclaimtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ResourceSlice v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourceSlice`

Other API versions of this object exist: v1alpha3

Appears In:

ResourceSliceList [resource/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceSliceSpec	Contains the information published by the driver. Changing the spec automatically increments the metadata.generation number.

ResourceSliceSpec v1beta1 resource

Appears In:

ResourceSlice [resource/v1beta1]

Field	Description
`allNodes` boolean	AllNodes indicates that all nodes have access to the resources in the pool. Exactly one of NodeName, NodeSelector and AllNodes must be set.
`devices` Device array	Devices lists some or all of the devices in this pool. Must not have more than 128 entries.
`driver` string	Driver identifies the DRA driver providing the capacity information. A field selector can be used to list only ResourceSlice objects with a certain driver name. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver. This field is immutable.
`nodeName` string	NodeName identifies the node which provides the resources in this pool. A field selector can be used to list only ResourceSlice objects belonging to a certain node. This field can be used to limit access from nodes to ResourceSlices with the same node name. It also indicates to autoscalers that adding new nodes of the same type as some old node might also make new resources available. Exactly one of NodeName, NodeSelector and AllNodes must be set. This field is immutable.
`nodeSelector` NodeSelector	NodeSelector defines which nodes have access to the resources in the pool, when that pool is not limited to a single node. Must use exactly one term. Exactly one of NodeName, NodeSelector and AllNodes must be set.
`pool` ResourcePool	Pool describes the pool that this ResourceSlice belongs to.

ResourceSliceList v1beta1 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceSlice array	Items is the list of resource ResourceSlices.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceSlice

HTTP Request

POST /apis/resource.k8s.io/v1beta1/resourceslices

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceSlice

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created
202 ResourceSlice	Accepted

Patch

partially update the specified ResourceSlice

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created

Replace

replace the specified ResourceSlice

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceSlice

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created

Delete

delete a ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceSlice	OK
202 ResourceSlice	Accepted

Delete Collection

delete collection of ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/resourceslices

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1beta1/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceSlice	OK

List

list or watch objects of kind ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1beta1/resourceslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceSliceList	OK

Watch

watch changes to an object of kind ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/resourceslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ValidatingAdmissionPolicy v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ValidatingAdmissionPolicy`

Other API versions of this object exist: v1beta1

Appears In:

ValidatingAdmissionPolicyList [admissionregistration/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` ValidatingAdmissionPolicySpec	Specification of the desired behavior of the ValidatingAdmissionPolicy.
`status` ValidatingAdmissionPolicyStatus	The status of the ValidatingAdmissionPolicy, including warnings that are useful to determine if the policy behaves in the expected way. Populated by the system. Read-only.

ValidatingAdmissionPolicySpec v1 admissionregistration

Appears In:

ValidatingAdmissionPolicy [admissionregistration/v1]

Field	Description
`auditAnnotations` AuditAnnotation array	auditAnnotations contains CEL expressions which are used to produce audit annotations for the audit event of the API request. validations and auditAnnotations may not both be empty; a least one of validations or auditAnnotations is required.
`failurePolicy` string	failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.
`matchConditions` MatchCondition array patch strategy: merge patch merge key: name	MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
`matchConstraints` MatchResources	MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.
`paramKind` ParamKind	ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
`validations` Validation array	Validations contain CEL expressions which is used to apply the validation. Validations and AuditAnnotations may not both be empty; a minimum of one Validations or AuditAnnotations is required.
`variables` Variable array patch strategy: merge patch merge key: name	Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.

ValidatingAdmissionPolicyStatus v1 admissionregistration

Appears In:

ValidatingAdmissionPolicy [admissionregistration/v1]

Field	Description
`conditions` Condition array	The conditions represent the latest available observations of a policy's current state.
`observedGeneration` integer	The generation observed by the controller.
`typeChecking` TypeChecking	The results of type checking for each expression. Presence of this field indicates the completion of the type checking.

ValidatingAdmissionPolicyList v1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ValidatingAdmissionPolicy array	List of ValidatingAdmissionPolicy.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created
202 ValidatingAdmissionPolicy	Accepted

Patch

partially update the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Replace

replace the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Delete

delete a ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicy	OK

List

list or watch objects of kind ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ValidatingAdmissionPolicyList	OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Read Status

read status of the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicy	OK

Replace Status

replace status of the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

ValidatingAdmissionPolicyBinding v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ValidatingAdmissionPolicyBinding`

Other API versions of this object exist: v1beta1

Appears In:

ValidatingAdmissionPolicyBindingList [admissionregistration/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` ValidatingAdmissionPolicyBindingSpec	Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.

ValidatingAdmissionPolicyBindingSpec v1 admissionregistration

Appears In:

ValidatingAdmissionPolicyBinding [admissionregistration/v1]

Field	Description
`matchResources` MatchResources	MatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
`paramRef` ParamRef	paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
`policyName` string	PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.
`validationActions` string array	validationActions declares how Validations of the referenced ValidatingAdmissionPolicy are enforced. If a validation evaluates to false it is always enforced according to these actions. Failures defined by the ValidatingAdmissionPolicy's FailurePolicy are enforced according to these actions only if the FailurePolicy is set to Fail, otherwise the failures are ignored. This includes compilation errors, runtime errors and misconfigurations of the policy. validationActions is declared as a set of action values. Order does not matter. validationActions may not contain duplicates of the same action. The supported actions values are: "Deny" specifies that a validation failure results in a denied request. "Warn" specifies that a validation failure is reported to the request client in HTTP Warning headers, with a warning code of 299. Warnings can be sent both for allowed or denied admission responses. "Audit" specifies that a validation failure is included in the published audit event for the request. The audit event will contain a `validation.policy.admission.k8s.io/validation_failure` audit annotation with a value containing the details of the validation failures, formatted as a JSON list of objects, each with the following fields: - message: The validation failure message string - policy: The resource name of the ValidatingAdmissionPolicy - binding: The resource name of the ValidatingAdmissionPolicyBinding - expressionIndex: The index of the failed validations in the ValidatingAdmissionPolicy - validationActions: The enforcement actions enacted for the validation failure Example audit annotation: `"validation.policy.admission.k8s.io/validation_failure": "[{\"message\": \"Invalid value\", {\"policy\": \"policy.example.com\", {\"binding\": \"policybinding.example.com\", {\"expressionIndex\": \"1\", {\"validationActions\": [\"Audit\"]}]"` Clients should expect to handle additional values by ignoring any values not recognized. "Deny" and "Warn" may not be used together since this combination needlessly duplicates the validation failure both in the API response body and the HTTP warning headers. Required.

ValidatingAdmissionPolicyBindingList v1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ValidatingAdmissionPolicyBinding array	List of PolicyBinding.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicyBinding

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created
202 ValidatingAdmissionPolicyBinding	Accepted

Patch

partially update the specified ValidatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created

Replace

replace the specified ValidatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicyBinding

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created

Delete

delete a ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK

List

list or watch objects of kind ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ValidatingAdmissionPolicyBindingList	OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

MutatingAdmissionPolicy v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`MutatingAdmissionPolicy`

Appears In:

MutatingAdmissionPolicyList [admissionregistration/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` MutatingAdmissionPolicySpec	Specification of the desired behavior of the MutatingAdmissionPolicy.

MutatingAdmissionPolicySpec v1alpha1 admissionregistration

Appears In:

MutatingAdmissionPolicy [admissionregistration/v1alpha1]

Field	Description
`failurePolicy` string	failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if paramKind refers to a non-existent Kind. A binding is invalid if paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. Allowed values are Ignore or Fail. Defaults to Fail.
`matchConditions` MatchCondition array patch strategy: merge patch merge key: name	matchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the matchConstraints. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
`matchConstraints` MatchResources	matchConstraints specifies what resources this policy is designed to validate. The MutatingAdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API MutatingAdmissionPolicy cannot match MutatingAdmissionPolicy and MutatingAdmissionPolicyBinding. The CREATE, UPDATE and CONNECT operations are allowed. The DELETE operation may not be matched. '*' matches CREATE, UPDATE and CONNECT. Required.
`mutations` Mutation array	mutations contain operations to perform on matching objects. mutations may not be empty; a minimum of one mutation is required. mutations are evaluated in order, and are reinvoked according to the reinvocationPolicy. The mutations of a policy are invoked for each binding of this policy and reinvocation of mutations occurs on a per binding basis.
`paramKind` ParamKind	paramKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If paramKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in MutatingAdmissionPolicyBinding, the params variable will be null.
`reinvocationPolicy` string	reinvocationPolicy indicates whether mutations may be called multiple times per MutatingAdmissionPolicyBinding as part of a single admission evaluation. Allowed values are "Never" and "IfNeeded". Never: These mutations will not be called more than once per binding in a single admission evaluation. IfNeeded: These mutations may be invoked more than once per binding for a single admission request and there is no guarantee of order with respect to other admission plugins, admission webhooks, bindings of this policy and admission policies. Mutations are only reinvoked when mutations change the object after this mutation is invoked. Required.
`variables` Variable array	variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except matchConditions because matchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, variables must be sorted by the order of first appearance and acyclic.

MutatingAdmissionPolicyList v1alpha1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` MutatingAdmissionPolicy array	List of ValidatingAdmissionPolicy.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a MutatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingAdmissionPolicy

Response

Code	Description
200 MutatingAdmissionPolicy	OK
201 MutatingAdmissionPolicy	Created
202 MutatingAdmissionPolicy	Accepted

Patch

partially update the specified MutatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 MutatingAdmissionPolicy	OK
201 MutatingAdmissionPolicy	Created

Replace

replace the specified MutatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingAdmissionPolicy

Response

Code	Description
200 MutatingAdmissionPolicy	OK
201 MutatingAdmissionPolicy	Created

Delete

delete a MutatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of MutatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified MutatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicy

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 MutatingAdmissionPolicy	OK

List

list or watch objects of kind MutatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 MutatingAdmissionPolicyList	OK

Watch

watch changes to an object of kind MutatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/mutatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicy

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of MutatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/mutatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

MutatingAdmissionPolicyBinding v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`MutatingAdmissionPolicyBinding`

Appears In:

MutatingAdmissionPolicyBindingList [admissionregistration/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` MutatingAdmissionPolicyBindingSpec	Specification of the desired behavior of the MutatingAdmissionPolicyBinding.

MutatingAdmissionPolicyBindingSpec v1alpha1 admissionregistration

Appears In:

MutatingAdmissionPolicyBinding [admissionregistration/v1alpha1]

Field	Description
`matchResources` MatchResources	matchResources limits what resources match this binding and may be mutated by it. Note that if matchResources matches a resource, the resource must also match a policy's matchConstraints and matchConditions before the resource may be mutated. When matchResources is unset, it does not constrain resource matching, and only the policy's matchConstraints and matchConditions must match for the resource to be mutated. Additionally, matchResources.resourceRules are optional and do not constraint matching when unset. Note that this is differs from MutatingAdmissionPolicy matchConstraints, where resourceRules are required. The CREATE, UPDATE and CONNECT operations are allowed. The DELETE operation may not be matched. '*' matches CREATE, UPDATE and CONNECT.
`paramRef` ParamRef	paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in spec.ParamKind of the bound MutatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the MutatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
`policyName` string	policyName references a MutatingAdmissionPolicy name which the MutatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.

MutatingAdmissionPolicyBindingList v1alpha1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` MutatingAdmissionPolicyBinding array	List of PolicyBinding.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a MutatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingAdmissionPolicyBinding

Response

Code	Description
200 MutatingAdmissionPolicyBinding	OK
201 MutatingAdmissionPolicyBinding	Created
202 MutatingAdmissionPolicyBinding	Accepted

Patch

partially update the specified MutatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 MutatingAdmissionPolicyBinding	OK
201 MutatingAdmissionPolicyBinding	Created

Replace

replace the specified MutatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` MutatingAdmissionPolicyBinding

Response

Code	Description
200 MutatingAdmissionPolicyBinding	OK
201 MutatingAdmissionPolicyBinding	Created

Delete

delete a MutatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of MutatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified MutatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 MutatingAdmissionPolicyBinding	OK

List

list or watch objects of kind MutatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/mutatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 MutatingAdmissionPolicyBindingList	OK

Watch

watch changes to an object of kind MutatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/mutatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the MutatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of MutatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/mutatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ValidatingWebhookConfiguration v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ValidatingWebhookConfiguration`

Appears In:

ValidatingWebhookConfigurationList [admissionregistration/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`webhooks` ValidatingWebhook array patch strategy: merge patch merge key: name	Webhooks is a list of webhooks and the affected resources and operations.

ValidatingWebhookConfigurationList v1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ValidatingWebhookConfiguration array	List of ValidatingWebhookConfiguration.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingWebhookConfiguration

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingWebhookConfiguration

Response

Code	Description
200 ValidatingWebhookConfiguration	OK
201 ValidatingWebhookConfiguration	Created
202 ValidatingWebhookConfiguration	Accepted

Patch

partially update the specified ValidatingWebhookConfiguration

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingWebhookConfiguration	OK
201 ValidatingWebhookConfiguration	Created

Replace

replace the specified ValidatingWebhookConfiguration

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingWebhookConfiguration

Response

Code	Description
200 ValidatingWebhookConfiguration	OK
201 ValidatingWebhookConfiguration	Created

Delete

delete a ValidatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingWebhookConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ValidatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ValidatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingWebhookConfiguration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingWebhookConfiguration	OK

List

list or watch objects of kind ValidatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ValidatingWebhookConfigurationList	OK

Watch

watch changes to an object of kind ValidatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingwebhookconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingWebhookConfiguration

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ValidatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingwebhookconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Cluster

Cluster resources are responsible for defining configuration of the cluster itself, and are generally only used by cluster operators.

APIService v1 apiregistration.k8s.io

Group	Version	Kind
`apiregistration.k8s.io`	`v1`	`APIService`

Appears In:

APIServiceList [apiregistration/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` APIServiceSpec	Spec contains information for locating and communicating with a server
`status` APIServiceStatus	Status contains derived information about an API server

APIServiceSpec v1 apiregistration

Appears In:

APIService [apiregistration/v1]

Field	Description
`caBundle` string	CABundle is a PEM encoded CA bundle which will be used to validate an API server's serving certificate. If unspecified, system trust roots on the apiserver are used.
`group` string	Group is the API group name this server hosts
`groupPriorityMinimum` integer	GroupPriorityMinimum is the priority this group should have at least. Higher priority means that the group is preferred by clients over lower priority ones. Note that other versions of this group might specify even higher GroupPriorityMinimum values such that the whole group gets a higher priority. The primary sort is based on GroupPriorityMinimum, ordered highest number to lowest (20 before 10). The secondary sort is based on the alphabetical comparison of the name of the object. (v1.bar before v1.foo) We'd recommend something like: *.k8s.io (except extensions) at 18000 and PaaSes (OpenShift, Deis) are recommended to be in the 2000s
`insecureSkipTLSVerify` boolean	InsecureSkipTLSVerify disables TLS certificate verification when communicating with this server. This is strongly discouraged. You should use the CABundle instead.
`service` ServiceReference	Service is a reference to the service for this API server. It must communicate on port 443. If the Service is nil, that means the handling for the API groupversion is handled locally on this server. The call will simply delegate to the normal handler chain to be fulfilled.
`version` string	Version is the API version this server hosts. For example, "v1"
`versionPriority` integer	VersionPriority controls the ordering of this API version inside of its group. Must be greater than zero. The primary sort is based on VersionPriority, ordered highest to lowest (20 before 10). Since it's inside of a group, the number can be small, probably in the 10s. In case of equal version priorities, the version string will be used to compute the order inside a group. If the version string is "kube-like", it will sort above non "kube-like" version strings, which are ordered lexicographically. "Kube-like" versions start with a "v", then are followed by a number (the major version), then optionally the string "alpha" or "beta" and another number (the minor version). These are sorted first by GA > beta > alpha (where GA is a version with no suffix such as beta or alpha), and then by comparing major version, then minor version. An example sorted list of versions: v10, v2, v1, v11beta2, v10beta3, v3beta1, v12alpha1, v11alpha2, foo1, foo10.

APIServiceStatus v1 apiregistration

Appears In:

APIService [apiregistration/v1]

Field	Description
`conditions` APIServiceCondition array patch strategy: merge patch merge key: type	Current service state of apiService.

APIServiceList v1 apiregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` APIService array	Items is the list of APIService
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an APIService

HTTP Request

POST /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` APIService

Response

Code	Description
200 APIService	OK
201 APIService	Created
202 APIService	Accepted

Patch

partially update the specified APIService

HTTP Request

PATCH /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 APIService	OK
201 APIService	Created

Replace

replace the specified APIService

HTTP Request

PUT /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` APIService

Response

Code	Description
200 APIService	OK
201 APIService	Created

Delete

delete an APIService

HTTP Request

DELETE /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of APIService

HTTP Request

DELETE /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 APIService	OK

List

list or watch objects of kind APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 APIServiceList	OK

Watch

watch changes to an object of kind APIService. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apiregistration.k8s.io/v1/watch/apiservices/{name}

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of APIService. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apiregistration.k8s.io/v1/watch/apiservices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified APIService

HTTP Request

PATCH /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 APIService	OK
201 APIService	Created

Read Status

read status of the specified APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 APIService	OK

Replace Status

replace status of the specified APIService

HTTP Request

PUT /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

Parameter	Description
`name`	name of the APIService

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` APIService

Response

Code	Description
200 APIService	OK
201 APIService	Created

Binding v1 core

Group	Version	Kind
`core`	`v1`	`Binding`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`target` ObjectReference	The target object that you want to bind to the standard object.

Write Operations

Create

create a Binding

HTTP Request

POST /api/v1/namespaces/{namespace}/bindings

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Binding

Response

Code	Description
200 Binding	OK
201 Binding	Created
202 Binding	Accepted

CertificateSigningRequest v1 certificates.k8s.io

Group	Version	Kind
`certificates.k8s.io`	`v1`	`CertificateSigningRequest`

Appears In:

CertificateSigningRequestList [certificates/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta
`spec` CertificateSigningRequestSpec	spec contains the certificate request, and is immutable after creation. Only the request, signerName, expirationSeconds, and usages fields can be set on creation. Other fields are derived by Kubernetes and cannot be modified by users.
`status` CertificateSigningRequestStatus	status contains information about whether the request is approved or denied, and the certificate issued by the signer, or the failure condition indicating signer failure.

CertificateSigningRequestSpec v1 certificates

Appears In:

CertificateSigningRequest [certificates/v1]

Field	Description
`expirationSeconds` integer	expirationSeconds is the requested duration of validity of the issued certificate. The certificate signer may issue a certificate with a different validity duration so a client must check the delta between the notBefore and and notAfter fields in the issued certificate to determine the actual duration. The v1.22+ in-tree implementations of the well-known Kubernetes signers will honor this field as long as the requested duration is not greater than the maximum duration they will honor per the --cluster-signing-duration CLI flag to the Kubernetes controller manager. Certificate signers may not honor this field for various reasons: 1. Old signer that is unaware of the field (such as the in-tree implementations prior to v1.22) 2. Signer whose configured maximum is shorter than the requested duration 3. Signer whose configured minimum is longer than the requested duration The minimum valid value for expirationSeconds is 600, i.e. 10 minutes.
`extra` object	extra contains extra attributes of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
`groups` string array	groups contains group membership of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
`request` string	request contains an x509 certificate signing request encoded in a "CERTIFICATE REQUEST" PEM block. When serialized as JSON or YAML, the data is additionally base64-encoded.
`signerName` string	signerName indicates the requested signer, and is a qualified name. List/watch requests for CertificateSigningRequests can filter on this field using a "spec.signerName=NAME" fieldSelector. Well-known Kubernetes signers are: 1. "kubernetes.io/kube-apiserver-client": issues client certificates that can be used to authenticate to kube-apiserver. Requests for this signer are never auto-approved by kube-controller-manager, can be issued by the "csrsigning" controller in kube-controller-manager. 2. "kubernetes.io/kube-apiserver-client-kubelet": issues client certificates that kubelets use to authenticate to kube-apiserver. Requests for this signer can be auto-approved by the "csrapproving" controller in kube-controller-manager, and can be issued by the "csrsigning" controller in kube-controller-manager. 3. "kubernetes.io/kubelet-serving" issues serving certificates that kubelets use to serve TLS endpoints, which kube-apiserver can connect to securely. Requests for this signer are never auto-approved by kube-controller-manager, and can be issued by the "csrsigning" controller in kube-controller-manager. More details are available at https://k8s.io/docs/reference/access-authn-authz/certificate-signing-requests/#kubernetes-signers Custom signerNames can also be specified. The signer defines: 1. Trust distribution: how trust (CA bundles) are distributed. 2. Permitted subjects: and behavior when a disallowed subject is requested. 3. Required, permitted, or forbidden x509 extensions in the request (including whether subjectAltNames are allowed, which types, restrictions on allowed values) and behavior when a disallowed extension is requested. 4. Required, permitted, or forbidden key usages / extended key usages. 5. Expiration/certificate lifetime: whether it is fixed by the signer, configurable by the admin. 6. Whether or not requests for CA certificates are allowed.
`uid` string	uid contains the uid of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
`usages` string array	usages specifies a set of key usages requested in the issued certificate. Requests for TLS client certificates typically request: "digital signature", "key encipherment", "client auth". Requests for TLS serving certificates typically request: "key encipherment", "digital signature", "server auth". Valid values are: "signing", "digital signature", "content commitment", "key encipherment", "key agreement", "data encipherment", "cert sign", "crl sign", "encipher only", "decipher only", "any", "server auth", "client auth", "code signing", "email protection", "s/mime", "ipsec end system", "ipsec tunnel", "ipsec user", "timestamping", "ocsp signing", "microsoft sgc", "netscape sgc"
`username` string	username contains the name of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.

CertificateSigningRequestStatus v1 certificates

Appears In:

CertificateSigningRequest [certificates/v1]

Field Description

certificate
string certificate is populated with an issued certificate by the signer after an Approved condition is present. This field is set via the /status subresource. Once populated, this field is immutable. If the certificate signing request is denied, a condition of type "Denied" is added and this field remains empty. If the signer cannot issue the certificate, a condition of type "Failed" is added and this field remains empty. Validation requirements: 1. certificate must contain one or more PEM blocks. 2. All PEM blocks must have the "CERTIFICATE" label, contain no headers, and the encoded data must be a BER-encoded ASN.1 Certificate structure as described in section 4 of RFC5280. 3. Non-PEM content may appear before or after the "CERTIFICATE" PEM blocks and is unvalidated, to allow for explanatory text as described in section 5.2 of RFC7468. If more than one PEM block is present, and the definition of the requested spec.signerName does not indicate otherwise, the first block is the issued certificate, and subsequent blocks should be treated as intermediate certificates and presented in TLS handshakes. The certificate is encoded in PEM format. When serialized as JSON or YAML, the data is additionally base64-encoded, so it consists of: base64( -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- )

conditions
CertificateSigningRequestCondition array conditions applied to the request. Known conditions are "Approved", "Denied", and "Failed".

CertificateSigningRequestList v1 certificates

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` CertificateSigningRequest array	items is a collection of CertificateSigningRequest objects
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta

Write Operations

Create

create a CertificateSigningRequest

HTTP Request

POST /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CertificateSigningRequest

Response

Code	Description
200 CertificateSigningRequest	OK
201 CertificateSigningRequest	Created
202 CertificateSigningRequest	Accepted

Patch

partially update the specified CertificateSigningRequest

HTTP Request

PATCH /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CertificateSigningRequest	OK
201 CertificateSigningRequest	Created

Replace

replace the specified CertificateSigningRequest

HTTP Request

PUT /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CertificateSigningRequest

Response

Code	Description
200 CertificateSigningRequest	OK
201 CertificateSigningRequest	Created

Delete

delete a CertificateSigningRequest

HTTP Request

DELETE /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of CertificateSigningRequest

HTTP Request

DELETE /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CertificateSigningRequest	OK

List

list or watch objects of kind CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 CertificateSigningRequestList	OK

Watch

watch changes to an object of kind CertificateSigningRequest. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/certificates.k8s.io/v1/watch/certificatesigningrequests/{name}

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of CertificateSigningRequest. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/certificates.k8s.io/v1/watch/certificatesigningrequests

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified CertificateSigningRequest

HTTP Request

PATCH /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 CertificateSigningRequest	OK
201 CertificateSigningRequest	Created

Read Status

read status of the specified CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 CertificateSigningRequest	OK

Replace Status

replace status of the specified CertificateSigningRequest

HTTP Request

PUT /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

Parameter	Description
`name`	name of the CertificateSigningRequest

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` CertificateSigningRequest

Response

Code	Description
200 CertificateSigningRequest	OK
201 CertificateSigningRequest	Created

ClusterRole v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`ClusterRole`

Appears In:

ClusterRoleList [rbac/v1]

Field	Description
`aggregationRule` AggregationRule	AggregationRule is an optional field that describes how to build the Rules for this ClusterRole. If AggregationRule is set, then the Rules are controller managed and direct changes to Rules will be stomped by the controller.
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata.
`rules` PolicyRule array	Rules holds all the PolicyRules for this ClusterRole

ClusterRoleList v1 rbac

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ClusterRole array	Items is a list of ClusterRoles
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata.

Write Operations

Create

create a ClusterRole

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterRole

Response

Code	Description
200 ClusterRole	OK
201 ClusterRole	Created
202 ClusterRole	Accepted

Patch

partially update the specified ClusterRole

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRole

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ClusterRole	OK
201 ClusterRole	Created

Replace

replace the specified ClusterRole

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRole

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterRole

Response

Code	Description
200 ClusterRole	OK
201 ClusterRole	Created

Delete

delete a ClusterRole

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRole

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ClusterRole

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ClusterRole

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRole

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ClusterRole	OK

List

list or watch objects of kind ClusterRole

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ClusterRoleList	OK

Watch

watch changes to an object of kind ClusterRole. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterroles/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRole

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ClusterRole. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterroles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ClusterRoleBinding v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`ClusterRoleBinding`

Appears In:

ClusterRoleBindingList [rbac/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata.
`roleRef` RoleRef	RoleRef can only reference a ClusterRole in the global namespace. If the RoleRef cannot be resolved, the Authorizer must return an error. This field is immutable.
`subjects` Subject array	Subjects holds references to the objects the role applies to.

ClusterRoleBindingList v1 rbac

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ClusterRoleBinding array	Items is a list of ClusterRoleBindings
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata.

Write Operations

Create

create a ClusterRoleBinding

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterRoleBinding

Response

Code	Description
200 ClusterRoleBinding	OK
201 ClusterRoleBinding	Created
202 ClusterRoleBinding	Accepted

Patch

partially update the specified ClusterRoleBinding

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRoleBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ClusterRoleBinding	OK
201 ClusterRoleBinding	Created

Replace

replace the specified ClusterRoleBinding

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRoleBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ClusterRoleBinding

Response

Code	Description
200 ClusterRoleBinding	OK
201 ClusterRoleBinding	Created

Delete

delete a ClusterRoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRoleBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ClusterRoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ClusterRoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRoleBinding

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ClusterRoleBinding	OK

List

list or watch objects of kind ClusterRoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ClusterRoleBindingList	OK

Watch

watch changes to an object of kind ClusterRoleBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterrolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ClusterRoleBinding

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ClusterRoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterrolebindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ComponentStatus v1 core

Group	Version	Kind
`core`	`v1`	`ComponentStatus`

Appears In:

ComponentStatusList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`conditions` ComponentCondition array patch strategy: merge patch merge key: type	List of component conditions observed
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

ComponentStatusList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ComponentStatus array	List of ComponentStatus objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Read Operations

Read

read the specified ComponentStatus

HTTP Request

GET /api/v1/componentstatuses/{name}

Path Parameters

Parameter	Description
`name`	name of the ComponentStatus

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ComponentStatus	OK

List

list objects of kind ComponentStatus

HTTP Request

GET /api/v1/componentstatuses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ComponentStatusList	OK

FlowSchema v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`FlowSchema`

Appears In:

FlowSchemaList [flowcontrol/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` FlowSchemaSpec	`spec` is the specification of the desired behavior of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` FlowSchemaStatus	`status` is the current status of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

FlowSchemaSpec v1 flowcontrol

Appears In:

FlowSchema [flowcontrol/v1]

Field	Description
`distinguisherMethod` FlowDistinguisherMethod	`distinguisherMethod` defines how to compute the flow distinguisher for requests that match this schema. `nil` specifies that the distinguisher is disabled and thus will always be the empty string.
`matchingPrecedence` integer	`matchingPrecedence` is used to choose among the FlowSchemas that match a given request. The chosen FlowSchema is among those with the numerically lowest (which we take to be logically highest) MatchingPrecedence. Each MatchingPrecedence value must be ranged in [1,10000]. Note that if the precedence is not specified, it will be set to 1000 as default.
`priorityLevelConfiguration` PriorityLevelConfigurationReference	`priorityLevelConfiguration` should reference a PriorityLevelConfiguration in the cluster. If the reference cannot be resolved, the FlowSchema will be ignored and marked as invalid in its status. Required.
`rules` PolicyRulesWithSubjects array	`rules` describes which requests will match this flow schema. This FlowSchema matches a request if and only if at least one member of rules matches the request. if it is an empty slice, there will be no requests matching the FlowSchema.

FlowSchemaStatus v1 flowcontrol

Appears In:

FlowSchema [flowcontrol/v1]

Field	Description
`conditions` FlowSchemaCondition array patch strategy: merge patch merge key: type	`conditions` is a list of the current states of FlowSchema.

FlowSchemaList v1 flowcontrol

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` FlowSchema array	`items` is a list of FlowSchemas.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	`metadata` is the standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a FlowSchema

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` FlowSchema

Response

Code	Description
200 FlowSchema	OK
201 FlowSchema	Created
202 FlowSchema	Accepted

Patch

partially update the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 FlowSchema	OK
201 FlowSchema	Created

Replace

replace the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` FlowSchema

Response

Code	Description
200 FlowSchema	OK
201 FlowSchema	Created

Delete

delete a FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 FlowSchema	OK

List

list or watch objects of kind FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 FlowSchemaList	OK

Watch

watch changes to an object of kind FlowSchema. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/flowschemas/{name}

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of FlowSchema. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/flowschemas

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 FlowSchema	OK
201 FlowSchema	Created

Read Status

read status of the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 FlowSchema	OK

Replace Status

replace status of the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the FlowSchema

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` FlowSchema

Response

Code	Description
200 FlowSchema	OK
201 FlowSchema	Created

IPAddress v1beta1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1beta1`	`IPAddress`

Appears In:

IPAddressList [networking/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` IPAddressSpec	spec is the desired state of the IPAddress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IPAddressSpec v1beta1 networking

Appears In:

IPAddress [networking/v1beta1]

Field	Description
`parentRef` ParentReference	ParentRef references the resource that an IPAddress is attached to. An IPAddress must reference a parent object.

IPAddressList v1beta1 networking

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` IPAddress array	items is the list of IPAddresses.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an IPAddress

HTTP Request

POST /apis/networking.k8s.io/v1beta1/ipaddresses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` IPAddress

Response

Code	Description
200 IPAddress	OK
201 IPAddress	Created
202 IPAddress	Accepted

Patch

partially update the specified IPAddress

HTTP Request

PATCH /apis/networking.k8s.io/v1beta1/ipaddresses/{name}

Path Parameters

Parameter	Description
`name`	name of the IPAddress

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 IPAddress	OK
201 IPAddress	Created

Replace

replace the specified IPAddress

HTTP Request

PUT /apis/networking.k8s.io/v1beta1/ipaddresses/{name}

Path Parameters

Parameter	Description
`name`	name of the IPAddress

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` IPAddress

Response

Code	Description
200 IPAddress	OK
201 IPAddress	Created

Delete

delete an IPAddress

HTTP Request

DELETE /apis/networking.k8s.io/v1beta1/ipaddresses/{name}

Path Parameters

Parameter	Description
`name`	name of the IPAddress

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of IPAddress

HTTP Request

DELETE /apis/networking.k8s.io/v1beta1/ipaddresses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified IPAddress

HTTP Request

GET /apis/networking.k8s.io/v1beta1/ipaddresses/{name}

Path Parameters

Parameter	Description
`name`	name of the IPAddress

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 IPAddress	OK

List

list or watch objects of kind IPAddress

HTTP Request

GET /apis/networking.k8s.io/v1beta1/ipaddresses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 IPAddressList	OK

Watch

watch changes to an object of kind IPAddress. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1beta1/watch/ipaddresses/{name}

Path Parameters

Parameter	Description
`name`	name of the IPAddress

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of IPAddress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1beta1/watch/ipaddresses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Lease v1 coordination.k8s.io

Group	Version	Kind
`coordination.k8s.io`	`v1`	`Lease`

Appears In:

LeaseList [coordination/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` LeaseSpec	spec contains the specification of the Lease. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

LeaseSpec v1 coordination

Appears In:

Lease [coordination/v1]

Field	Description
`acquireTime` MicroTime	acquireTime is a time when the current lease was acquired.
`holderIdentity` string	holderIdentity contains the identity of the holder of a current lease. If Coordinated Leader Election is used, the holder identity must be equal to the elected LeaseCandidate.metadata.name field.
`leaseDurationSeconds` integer	leaseDurationSeconds is a duration that candidates for a lease need to wait to force acquire it. This is measured against the time of last observed renewTime.
`leaseTransitions` integer	leaseTransitions is the number of transitions of a lease between holders.
`preferredHolder` string	PreferredHolder signals to a lease holder that the lease has a more optimal holder and should be given up. This field can only be set if Strategy is also set.
`renewTime` MicroTime	renewTime is a time when the current holder of a lease has last updated the lease.
`strategy` string	Strategy indicates the strategy for picking the leader for coordinated leader election. If the field is not specified, there is no active coordination for this lease. (Alpha) Using this field requires the CoordinatedLeaderElection feature gate to be enabled.

LeaseList v1 coordination

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Lease array	items is a list of schema objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a Lease

HTTP Request

POST /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Lease

Response

Code	Description
200 Lease	OK
201 Lease	Created
202 Lease	Accepted

Patch

partially update the specified Lease

HTTP Request

PATCH /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

Parameter	Description
`name`	name of the Lease
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Lease	OK
201 Lease	Created

Replace

replace the specified Lease

HTTP Request

PUT /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

Parameter	Description
`name`	name of the Lease
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Lease

Response

Code	Description
200 Lease	OK
201 Lease	Created

Delete

delete a Lease

HTTP Request

DELETE /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

Parameter	Description
`name`	name of the Lease
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Lease

HTTP Request

DELETE /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

Parameter	Description
`name`	name of the Lease
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Lease	OK

List

list or watch objects of kind Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LeaseList	OK

List All Namespaces

list or watch objects of kind Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/leases

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LeaseList	OK

Watch

watch changes to an object of kind Lease. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/namespaces/{namespace}/leases/{name}

Path Parameters

Parameter	Description
`name`	name of the Lease
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Lease. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/namespaces/{namespace}/leases

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Lease. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/leases

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

LeaseCandidate v1alpha2 coordination.k8s.io

Group	Version	Kind
`coordination.k8s.io`	`v1alpha2`	`LeaseCandidate`

Appears In:

LeaseCandidateList [coordination/v1alpha2]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` LeaseCandidateSpec	spec contains the specification of the Lease. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

LeaseCandidateSpec v1alpha2 coordination

Appears In:

LeaseCandidate [coordination/v1alpha2]

Field	Description
`binaryVersion` string	BinaryVersion is the binary version. It must be in a semver format without leading `v`. This field is required.
`emulationVersion` string	EmulationVersion is the emulation version. It must be in a semver format without leading `v`. EmulationVersion must be less than or equal to BinaryVersion. This field is required when strategy is "OldestEmulationVersion"
`leaseName` string	LeaseName is the name of the lease for which this candidate is contending. This field is immutable.
`pingTime` MicroTime	PingTime is the last time that the server has requested the LeaseCandidate to renew. It is only done during leader election to check if any LeaseCandidates have become ineligible. When PingTime is updated, the LeaseCandidate will respond by updating RenewTime.
`renewTime` MicroTime	RenewTime is the time that the LeaseCandidate was last updated. Any time a Lease needs to do leader election, the PingTime field is updated to signal to the LeaseCandidate that they should update the RenewTime. Old LeaseCandidate objects are also garbage collected if it has been hours since the last renew. The PingTime field is updated regularly to prevent garbage collection for still active LeaseCandidates.
`strategy` string	Strategy is the strategy that coordinated leader election will use for picking the leader. If multiple candidates for the same Lease return different strategies, the strategy provided by the candidate with the latest BinaryVersion will be used. If there is still conflict, this is a user error and coordinated leader election will not operate the Lease until resolved. (Alpha) Using this field requires the CoordinatedLeaderElection feature gate to be enabled.

LeaseCandidateList v1alpha2 coordination

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` LeaseCandidate array	items is a list of schema objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a LeaseCandidate

HTTP Request

POST /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` LeaseCandidate

Response

Code	Description
200 LeaseCandidate	OK
201 LeaseCandidate	Created
202 LeaseCandidate	Accepted

Patch

partially update the specified LeaseCandidate

HTTP Request

PATCH /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates/{name}

Path Parameters

Parameter	Description
`name`	name of the LeaseCandidate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 LeaseCandidate	OK
201 LeaseCandidate	Created

Replace

replace the specified LeaseCandidate

HTTP Request

PUT /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates/{name}

Path Parameters

Parameter	Description
`name`	name of the LeaseCandidate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` LeaseCandidate

Response

Code	Description
200 LeaseCandidate	OK
201 LeaseCandidate	Created

Delete

delete a LeaseCandidate

HTTP Request

DELETE /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates/{name}

Path Parameters

Parameter	Description
`name`	name of the LeaseCandidate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of LeaseCandidate

HTTP Request

DELETE /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified LeaseCandidate

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates/{name}

Path Parameters

Parameter	Description
`name`	name of the LeaseCandidate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 LeaseCandidate	OK

List

list or watch objects of kind LeaseCandidate

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/namespaces/{namespace}/leasecandidates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LeaseCandidateList	OK

List All Namespaces

list or watch objects of kind LeaseCandidate

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/leasecandidates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 LeaseCandidateList	OK

Watch

watch changes to an object of kind LeaseCandidate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/watch/namespaces/{namespace}/leasecandidates/{name}

Path Parameters

Parameter	Description
`name`	name of the LeaseCandidate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of LeaseCandidate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/watch/namespaces/{namespace}/leasecandidates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of LeaseCandidate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1alpha2/watch/leasecandidates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

LocalSubjectAccessReview v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`LocalSubjectAccessReview`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` SubjectAccessReviewSpec	Spec holds information about the request being evaluated. spec.namespace must be equal to the namespace you made the request against. If empty, it is defaulted.
`status` SubjectAccessReviewStatus	Status is filled in by the server and indicates whether the request is allowed or not

Write Operations

Create

create a LocalSubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/namespaces/{namespace}/localsubjectaccessreviews

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` LocalSubjectAccessReview

Response

Code	Description
200 LocalSubjectAccessReview	OK
201 LocalSubjectAccessReview	Created
202 LocalSubjectAccessReview	Accepted

Namespace v1 core

Group	Version	Kind
`core`	`v1`	`Namespace`

Appears In:

NamespaceList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` NamespaceSpec	Spec defines the behavior of the Namespace. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` NamespaceStatus	Status describes the current status of a Namespace. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

NamespaceSpec v1 core

Appears In:

Namespace [core/v1]

Field	Description
`finalizers` string array	Finalizers is an opaque list of values that must be empty to permanently remove object from storage. More info: https://kubernetes.io/docs/tasks/administer-cluster/namespaces/

NamespaceStatus v1 core

Appears In:

Namespace [core/v1]

Field	Description
`conditions` NamespaceCondition array patch strategy: merge patch merge key: type	Represents the latest available observations of a namespace's current state.
`phase` string	Phase is the current lifecycle phase of the namespace. More info: https://kubernetes.io/docs/tasks/administer-cluster/namespaces/

NamespaceList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Namespace array	Items is the list of Namespace objects in the list. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Namespace

HTTP Request

POST /api/v1/namespaces

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Namespace

Response

Code	Description
200 Namespace	OK
201 Namespace	Created
202 Namespace	Accepted

Patch

partially update the specified Namespace

HTTP Request

PATCH /api/v1/namespaces/{name}

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Namespace	OK
201 Namespace	Created

Replace

replace the specified Namespace

HTTP Request

PUT /api/v1/namespaces/{name}

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Namespace

Response

Code	Description
200 Namespace	OK
201 Namespace	Created

Delete

delete a Namespace

HTTP Request

DELETE /api/v1/namespaces/{name}

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Read Operations

Read

read the specified Namespace

HTTP Request

GET /api/v1/namespaces/{name}

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Namespace	OK

List

list or watch objects of kind Namespace

HTTP Request

GET /api/v1/namespaces

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 NamespaceList	OK

Watch

watch changes to an object of kind Namespace. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{name}

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Namespace. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Namespace

HTTP Request

PATCH /api/v1/namespaces/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Namespace	OK
201 Namespace	Created

Read Status

read status of the specified Namespace

HTTP Request

GET /api/v1/namespaces/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Namespace	OK

Replace Status

replace status of the specified Namespace

HTTP Request

PUT /api/v1/namespaces/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Namespace

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Namespace

Response

Code	Description
200 Namespace	OK
201 Namespace	Created

Node v1 core

Group	Version	Kind
`core`	`v1`	`Node`

Appears In:

NodeList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` NodeSpec	Spec defines the behavior of a node. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` NodeStatus	Most recently observed status of the node. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

NodeSpec v1 core

Appears In:

Node [core/v1]

Field	Description
`configSource` NodeConfigSource	Deprecated: Previously used to specify the source of the node's configuration for the DynamicKubeletConfig feature. This feature is removed.
`externalID` string	Deprecated. Not all kubelets will set this field. Remove field after 1.13. see: https://issues.k8s.io/61966
`podCIDR` string	PodCIDR represents the pod IP range assigned to the node.
`podCIDRs` string array patch strategy: merge	podCIDRs represents the IP ranges assigned to the node for usage by Pods on that node. If this field is specified, the 0th entry must match the podCIDR field. It may contain at most 1 value for each of IPv4 and IPv6.
`providerID` string	ID of the node assigned by the cloud provider in the format: <ProviderName>://<ProviderSpecificNodeID>
`taints` Taint array	If specified, the node's taints.
`unschedulable` boolean	Unschedulable controls node schedulability of new pods. By default, node is schedulable. More info: https://kubernetes.io/docs/concepts/nodes/node/#manual-node-administration

NodeStatus v1 core

Appears In:

Node [core/v1]

Field	Description
`addresses` NodeAddress array patch strategy: merge patch merge key: type	List of addresses reachable to the node. Queried from cloud provider, if available. More info: https://kubernetes.io/docs/reference/node/node-status/#addresses Note: This field is declared as mergeable, but the merge key is not sufficiently unique, which can cause data corruption when it is merged. Callers should instead use a full-replacement patch. See https://pr.k8s.io/79391 for an example. Consumers should assume that addresses can change during the lifetime of a Node. However, there are some exceptions where this may not be possible, such as Pods that inherit a Node's address in its own status or consumers of the downward API (status.hostIP).
`allocatable` object	Allocatable represents the resources of a node that are available for scheduling. Defaults to Capacity.
`capacity` object	Capacity represents the total resources of a node. More info: https://kubernetes.io/docs/reference/node/node-status/#capacity
`conditions` NodeCondition array patch strategy: merge patch merge key: type	Conditions is an array of current observed node conditions. More info: https://kubernetes.io/docs/reference/node/node-status/#condition
`config` NodeConfigStatus	Status of the config assigned to the node via the dynamic Kubelet config feature.
`daemonEndpoints` NodeDaemonEndpoints	Endpoints of daemons running on the Node.
`features` NodeFeatures	Features describes the set of features implemented by the CRI implementation.
`images` ContainerImage array	List of container images on this node
`nodeInfo` NodeSystemInfo	Set of ids/uuids to uniquely identify the node. More info: https://kubernetes.io/docs/reference/node/node-status/#info
`phase` string	NodePhase is the recently observed lifecycle phase of the node. More info: https://kubernetes.io/docs/concepts/nodes/node/#phase The field is never populated, and now is deprecated.
`runtimeHandlers` NodeRuntimeHandler array	The available runtime handlers.
`volumesAttached` AttachedVolume array	List of volumes that are attached to the node.
`volumesInUse` string array	List of attachable volumes in use (mounted) by the node.

NodeList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Node array	List of nodes
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Node

HTTP Request

POST /api/v1/nodes

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Node

Response

Code	Description
200 Node	OK
201 Node	Created
202 Node	Accepted

Patch

partially update the specified Node

HTTP Request

PATCH /api/v1/nodes/{name}

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Node	OK
201 Node	Created

Replace

replace the specified Node

HTTP Request

PUT /api/v1/nodes/{name}

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Node

Response

Code	Description
200 Node	OK
201 Node	Created

Delete

delete a Node

HTTP Request

DELETE /api/v1/nodes/{name}

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Node

HTTP Request

DELETE /api/v1/nodes

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Node

HTTP Request

GET /api/v1/nodes/{name}

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Node	OK

List

list or watch objects of kind Node

HTTP Request

GET /api/v1/nodes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 NodeList	OK

Watch

watch changes to an object of kind Node. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/nodes/{name}

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Node. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/nodes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified Node

HTTP Request

PATCH /api/v1/nodes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Node	OK
201 Node	Created

Read Status

read status of the specified Node

HTTP Request

GET /api/v1/nodes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Node	OK

Replace Status

replace status of the specified Node

HTTP Request

PUT /api/v1/nodes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the Node

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Node

Response

Code	Description
200 Node	OK
201 Node	Created

Proxy Operations

Create Connect Proxy

connect POST requests to proxy of Node

HTTP Request

POST /api/v1/nodes/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Create Connect Proxy Path

connect POST requests to proxy of Node

HTTP Request

POST /api/v1/nodes/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Delete Connect Proxy

connect DELETE requests to proxy of Node

HTTP Request

DELETE /api/v1/nodes/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Node

HTTP Request

DELETE /api/v1/nodes/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Get Connect Proxy

connect GET requests to proxy of Node

HTTP Request

GET /api/v1/nodes/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Get Connect Proxy Path

connect GET requests to proxy of Node

HTTP Request

GET /api/v1/nodes/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Head Connect Proxy

connect HEAD requests to proxy of Node

HTTP Request

HEAD /api/v1/nodes/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Head Connect Proxy Path

connect HEAD requests to proxy of Node

HTTP Request

HEAD /api/v1/nodes/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Replace Connect Proxy

connect PUT requests to proxy of Node

HTTP Request

PUT /api/v1/nodes/{name}/proxy

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

Replace Connect Proxy Path

connect PUT requests to proxy of Node

HTTP Request

PUT /api/v1/nodes/{name}/proxy/{path}

Path Parameters

Parameter	Description
`name`	name of the NodeProxyOptions
`path`	path to the resource

Query Parameters

Parameter	Description
`path`	Path is the URL path to use for the current proxy request to node.

Response

Code	Description
200 string	OK

PersistentVolume v1 core

Group	Version	Kind
`core`	`v1`	`PersistentVolume`

These are assigned to Pods using PersistentVolumeClaims.

Appears In:

PersistentVolumeList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PersistentVolumeSpec	spec defines a specification of a persistent volume owned by the cluster. Provisioned by an administrator. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistent-volumes
`status` PersistentVolumeStatus	status represents the current information/status for the persistent volume. Populated by the system. Read-only. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistent-volumes

PersistentVolumeSpec v1 core

Appears In:

PersistentVolume [core/v1]
VolumeAttachmentSource [storage/v1]

Field	Description
`accessModes` string array	accessModes contains all ways the volume can be mounted. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes
`awsElasticBlockStore` AWSElasticBlockStoreVolumeSource	awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Deprecated: AWSElasticBlockStore is deprecated. All operations for the in-tree awsElasticBlockStore type are redirected to the ebs.csi.aws.com CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
`azureDisk` AzureDiskVolumeSource	azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod. Deprecated: AzureDisk is deprecated. All operations for the in-tree azureDisk type are redirected to the disk.csi.azure.com CSI driver.
`azureFile` AzureFilePersistentVolumeSource	azureFile represents an Azure File Service mount on the host and bind mount to the pod. Deprecated: AzureFile is deprecated. All operations for the in-tree azureFile type are redirected to the file.csi.azure.com CSI driver.
`capacity` object	capacity is the description of the persistent volume's resources and capacity. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#capacity
`cephfs` CephFSPersistentVolumeSource	cephFS represents a Ceph FS mount on the host that shares a pod's lifetime. Deprecated: CephFS is deprecated and the in-tree cephfs type is no longer supported.
`cinder` CinderPersistentVolumeSource	cinder represents a cinder volume attached and mounted on kubelets host machine. Deprecated: Cinder is deprecated. All operations for the in-tree cinder type are redirected to the cinder.csi.openstack.org CSI driver. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`claimRef` ObjectReference	claimRef is part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim. Expected to be non-nil when bound. claim.VolumeName is the authoritative bind between PV and PVC. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding
`csi` CSIPersistentVolumeSource	csi represents storage that is handled by an external CSI driver.
`fc` FCVolumeSource	fc represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod.
`flexVolume` FlexPersistentVolumeSource	flexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin. Deprecated: FlexVolume is deprecated. Consider using a CSIDriver instead.
`flocker` FlockerVolumeSource	flocker represents a Flocker volume attached to a kubelet's host machine and exposed to the pod for its usage. This depends on the Flocker control service being running. Deprecated: Flocker is deprecated and the in-tree flocker type is no longer supported.
`gcePersistentDisk` GCEPersistentDiskVolumeSource	gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin. Deprecated: GCEPersistentDisk is deprecated. All operations for the in-tree gcePersistentDisk type are redirected to the pd.csi.storage.gke.io CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
`glusterfs` GlusterfsPersistentVolumeSource	glusterfs represents a Glusterfs volume that is attached to a host and exposed to the pod. Provisioned by an admin. Deprecated: Glusterfs is deprecated and the in-tree glusterfs type is no longer supported. More info: https://examples.k8s.io/volumes/glusterfs/README.md
`hostPath` HostPathVolumeSource	hostPath represents a directory on the host. Provisioned by a developer or tester. This is useful for single-node development and testing only! On-host storage is not supported in any way and WILL NOT WORK in a multi-node cluster. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
`iscsi` ISCSIPersistentVolumeSource	iscsi represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin.
`local` LocalVolumeSource	local represents directly-attached storage with node affinity
`mountOptions` string array	mountOptions is the list of mount options, e.g. ["ro", "soft"]. Not validated - mount will simply fail if one is invalid. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options
`nfs` NFSVolumeSource	nfs represents an NFS mount on the host. Provisioned by an admin. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
`nodeAffinity` VolumeNodeAffinity	nodeAffinity defines constraints that limit what nodes this volume can be accessed from. This field influences the scheduling of pods that use this volume.
`persistentVolumeReclaimPolicy` string	persistentVolumeReclaimPolicy defines what happens to a persistent volume when released from its claim. Valid options are Retain (default for manually created PersistentVolumes), Delete (default for dynamically provisioned PersistentVolumes), and Recycle (deprecated). Recycle must be supported by the volume plugin underlying this PersistentVolume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming
`photonPersistentDisk` PhotonPersistentDiskVolumeSource	photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine. Deprecated: PhotonPersistentDisk is deprecated and the in-tree photonPersistentDisk type is no longer supported.
`portworxVolume` PortworxVolumeSource	portworxVolume represents a portworx volume attached and mounted on kubelets host machine. Deprecated: PortworxVolume is deprecated. All operations for the in-tree portworxVolume type are redirected to the pxd.portworx.com CSI driver when the CSIMigrationPortworx feature-gate is on.
`quobyte` QuobyteVolumeSource	quobyte represents a Quobyte mount on the host that shares a pod's lifetime. Deprecated: Quobyte is deprecated and the in-tree quobyte type is no longer supported.
`rbd` RBDPersistentVolumeSource	rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. Deprecated: RBD is deprecated and the in-tree rbd type is no longer supported. More info: https://examples.k8s.io/volumes/rbd/README.md
`scaleIO` ScaleIOPersistentVolumeSource	scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes. Deprecated: ScaleIO is deprecated and the in-tree scaleIO type is no longer supported.
`storageClassName` string	storageClassName is the name of StorageClass to which this persistent volume belongs. Empty value means that this volume does not belong to any StorageClass.
`storageos` StorageOSPersistentVolumeSource	storageOS represents a StorageOS volume that is attached to the kubelet's host machine and mounted into the pod. Deprecated: StorageOS is deprecated and the in-tree storageos type is no longer supported. More info: https://examples.k8s.io/volumes/storageos/README.md
`volumeAttributesClassName` string	Name of VolumeAttributesClass to which this persistent volume belongs. Empty value is not allowed. When this field is not set, it indicates that this volume does not belong to any VolumeAttributesClass. This field is mutable and can be changed by the CSI driver after a volume has been updated successfully to a new class. For an unbound PersistentVolume, the volumeAttributesClassName will be matched with unbound PersistentVolumeClaims during the binding process. This is a beta field and requires enabling VolumeAttributesClass feature (off by default).
`volumeMode` string	volumeMode defines if a volume is intended to be used with a formatted filesystem or to remain in raw block state. Value of Filesystem is implied when not included in spec.
`vsphereVolume` VsphereVirtualDiskVolumeSource	vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine. Deprecated: VsphereVolume is deprecated. All operations for the in-tree vsphereVolume type are redirected to the csi.vsphere.vmware.com CSI driver.

PersistentVolumeStatus v1 core

Appears In:

PersistentVolume [core/v1]

Field	Description
`lastPhaseTransitionTime` Time	lastPhaseTransitionTime is the time the phase transitioned from one to another and automatically resets to current time everytime a volume phase transitions.
`message` string	message is a human-readable message indicating details about why the volume is in this state.
`phase` string	phase indicates if a volume is available, bound to a claim, or released by a claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#phase
`reason` string	reason is a brief CamelCase string that describes any failure and is meant for machine parsing and tidy display in the CLI.

PersistentVolumeList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PersistentVolume array	items is a list of persistent volumes. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PersistentVolume

HTTP Request

POST /api/v1/persistentvolumes

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolume

Response

Code	Description
200 PersistentVolume	OK
201 PersistentVolume	Created
202 PersistentVolume	Accepted

Patch

partially update the specified PersistentVolume

HTTP Request

PATCH /api/v1/persistentvolumes/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PersistentVolume	OK
201 PersistentVolume	Created

Replace

replace the specified PersistentVolume

HTTP Request

PUT /api/v1/persistentvolumes/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolume

Response

Code	Description
200 PersistentVolume	OK
201 PersistentVolume	Created

Delete

delete a PersistentVolume

HTTP Request

DELETE /api/v1/persistentvolumes/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 PersistentVolume	OK
202 PersistentVolume	Accepted

Delete Collection

delete collection of PersistentVolume

HTTP Request

DELETE /api/v1/persistentvolumes

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PersistentVolume	OK

List

list or watch objects of kind PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PersistentVolumeList	OK

Watch

watch changes to an object of kind PersistentVolume. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/persistentvolumes/{name}

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PersistentVolume. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/persistentvolumes

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified PersistentVolume

HTTP Request

PATCH /api/v1/persistentvolumes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PersistentVolume	OK
201 PersistentVolume	Created

Read Status

read status of the specified PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PersistentVolume	OK

Replace Status

replace status of the specified PersistentVolume

HTTP Request

PUT /api/v1/persistentvolumes/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PersistentVolume

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PersistentVolume

Response

Code	Description
200 PersistentVolume	OK
201 PersistentVolume	Created

PriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`PriorityLevelConfiguration`

Appears In:

PriorityLevelConfigurationList [flowcontrol/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` PriorityLevelConfigurationSpec	`spec` is the specification of the desired behavior of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` PriorityLevelConfigurationStatus	`status` is the current status of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PriorityLevelConfigurationSpec v1 flowcontrol

Appears In:

PriorityLevelConfiguration [flowcontrol/v1]

Field	Description
`exempt` ExemptPriorityLevelConfiguration	`exempt` specifies how requests are handled for an exempt priority level. This field MUST be empty if `type` is `"Limited"`. This field MAY be non-empty if `type` is `"Exempt"`. If empty and `type` is `"Exempt"` then the default values for `ExemptPriorityLevelConfiguration` apply.
`limited` LimitedPriorityLevelConfiguration	`limited` specifies how requests are handled for a Limited priority level. This field must be non-empty if and only if `type` is `"Limited"`.
`type` string	`type` indicates whether this priority level is subject to limitation on request execution. A value of `"Exempt"` means that requests of this priority level are not subject to a limit (and thus are never queued) and do not detract from the capacity made available to other priority levels. A value of `"Limited"` means that (a) requests of this priority level _are_ subject to limits and (b) some of the server's limited capacity is made available exclusively to this priority level. Required.

PriorityLevelConfigurationStatus v1 flowcontrol

Appears In:

PriorityLevelConfiguration [flowcontrol/v1]

Field	Description
`conditions` PriorityLevelConfigurationCondition array patch strategy: merge patch merge key: type	`conditions` is the current state of "request-priority".

PriorityLevelConfigurationList v1 flowcontrol

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` PriorityLevelConfiguration array	`items` is a list of request-priorities.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PriorityLevelConfiguration

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PriorityLevelConfiguration

Response

Code	Description
200 PriorityLevelConfiguration	OK
201 PriorityLevelConfiguration	Created
202 PriorityLevelConfiguration	Accepted

Patch

partially update the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PriorityLevelConfiguration	OK
201 PriorityLevelConfiguration	Created

Replace

replace the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PriorityLevelConfiguration

Response

Code	Description
200 PriorityLevelConfiguration	OK
201 PriorityLevelConfiguration	Created

Delete

delete a PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PriorityLevelConfiguration	OK

List

list or watch objects of kind PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 PriorityLevelConfigurationList	OK

Watch

watch changes to an object of kind PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/prioritylevelconfigurations/{name}

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/prioritylevelconfigurations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 PriorityLevelConfiguration	OK
201 PriorityLevelConfiguration	Created

Read Status

read status of the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 PriorityLevelConfiguration	OK

Replace Status

replace status of the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the PriorityLevelConfiguration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` PriorityLevelConfiguration

Response

Code	Description
200 PriorityLevelConfiguration	OK
201 PriorityLevelConfiguration	Created

ResourceQuota v1 core

Group	Version	Kind
`core`	`v1`	`ResourceQuota`

Appears In:

ResourceQuotaList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` ResourceQuotaSpec	Spec defines the desired quota. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` ResourceQuotaStatus	Status defines the actual enforced quota and its current usage. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ResourceQuotaSpec v1 core

Appears In:

ResourceQuota [core/v1]

Field	Description
`hard` object	hard is the set of desired hard limits for each named resource. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
`scopeSelector` ScopeSelector	scopeSelector is also a collection of filters like scopes that must match each object tracked by a quota but expressed using ScopeSelectorOperator in combination with possible values. For a resource to match, both scopes AND scopeSelector (if specified in spec), must be matched.
`scopes` string array	A collection of filters that must match each object tracked by a quota. If not specified, the quota matches all objects.

ResourceQuotaStatus v1 core

Appears In:

ResourceQuota [core/v1]

Field	Description
`hard` object	Hard is the set of enforced hard limits for each named resource. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
`used` object	Used is the current observed total usage of the resource in the namespace.

ResourceQuotaList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceQuota array	Items is a list of ResourceQuota objects. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ResourceQuota

HTTP Request

POST /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceQuota

Response

Code	Description
200 ResourceQuota	OK
201 ResourceQuota	Created
202 ResourceQuota	Accepted

Patch

partially update the specified ResourceQuota

HTTP Request

PATCH /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceQuota	OK
201 ResourceQuota	Created

Replace

replace the specified ResourceQuota

HTTP Request

PUT /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceQuota

Response

Code	Description
200 ResourceQuota	OK
201 ResourceQuota	Created

Delete

delete a ResourceQuota

HTTP Request

DELETE /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceQuota	OK
202 ResourceQuota	Accepted

Delete Collection

delete collection of ResourceQuota

HTTP Request

DELETE /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceQuota	OK

List

list or watch objects of kind ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceQuotaList	OK

List All Namespaces

list or watch objects of kind ResourceQuota

HTTP Request

GET /api/v1/resourcequotas

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceQuotaList	OK

Watch

watch changes to an object of kind ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/resourcequotas

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/resourcequotas

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ResourceQuota

HTTP Request

PATCH /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceQuota	OK
201 ResourceQuota	Created

Read Status

read status of the specified ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceQuota	OK

Replace Status

replace status of the specified ResourceQuota

HTTP Request

PUT /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceQuota
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceQuota

Response

Code	Description
200 ResourceQuota	OK
201 ResourceQuota	Created

Role v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`Role`

Appears In:

RoleList [rbac/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata.
`rules` PolicyRule array	Rules holds all the PolicyRules for this Role

RoleList v1 rbac

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Role array	Items is a list of Roles
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata.

Write Operations

Create

create a Role

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Role

Response

Code	Description
200 Role	OK
201 Role	Created
202 Role	Accepted

Patch

partially update the specified Role

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

Parameter	Description
`name`	name of the Role
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Role	OK
201 Role	Created

Replace

replace the specified Role

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

Parameter	Description
`name`	name of the Role
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Role

Response

Code	Description
200 Role	OK
201 Role	Created

Delete

delete a Role

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

Parameter	Description
`name`	name of the Role
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Role

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

Parameter	Description
`name`	name of the Role
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Role	OK

List

list or watch objects of kind Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 RoleList	OK

List All Namespaces

list or watch objects of kind Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/roles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 RoleList	OK

Watch

watch changes to an object of kind Role. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/roles/{name}

Path Parameters

Parameter	Description
`name`	name of the Role
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Role. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/roles

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Role. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/roles

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

RoleBinding v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`RoleBinding`

Appears In:

RoleBindingList [rbac/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata.
`roleRef` RoleRef	RoleRef can reference a Role in the current namespace or a ClusterRole in the global namespace. If the RoleRef cannot be resolved, the Authorizer must return an error. This field is immutable.
`subjects` Subject array	Subjects holds references to the objects the role applies to.

RoleBindingList v1 rbac

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` RoleBinding array	Items is a list of RoleBindings
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata.

Write Operations

Create

create a RoleBinding

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` RoleBinding

Response

Code	Description
200 RoleBinding	OK
201 RoleBinding	Created
202 RoleBinding	Accepted

Patch

partially update the specified RoleBinding

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the RoleBinding
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 RoleBinding	OK
201 RoleBinding	Created

Replace

replace the specified RoleBinding

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the RoleBinding
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` RoleBinding

Response

Code	Description
200 RoleBinding	OK
201 RoleBinding	Created

Delete

delete a RoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the RoleBinding
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of RoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the RoleBinding
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 RoleBinding	OK

List

list or watch objects of kind RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 RoleBindingList	OK

List All Namespaces

list or watch objects of kind RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/rolebindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 RoleBindingList	OK

Watch

watch changes to an object of kind RoleBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/rolebindings/{name}

Path Parameters

Parameter	Description
`name`	name of the RoleBinding
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of RoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/rolebindings

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of RoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/rolebindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

RuntimeClass v1 node.k8s.io

Group	Version	Kind
`node.k8s.io`	`v1`	`RuntimeClass`

Appears In:

RuntimeClassList [node/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`handler` string	handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration. It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The Handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`overhead` Overhead	overhead represents the resource overhead associated with running a pod for a given RuntimeClass. For more details, see https://kubernetes.io/docs/concepts/scheduling-eviction/pod-overhead/
`scheduling` Scheduling	scheduling holds the scheduling constraints to ensure that pods running with this RuntimeClass are scheduled to nodes that support it. If scheduling is nil, this RuntimeClass is assumed to be supported by all nodes.

RuntimeClassList v1 node

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` RuntimeClass array	items is a list of schema objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a RuntimeClass

HTTP Request

POST /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` RuntimeClass

Response

Code	Description
200 RuntimeClass	OK
201 RuntimeClass	Created
202 RuntimeClass	Accepted

Patch

partially update the specified RuntimeClass

HTTP Request

PATCH /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the RuntimeClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 RuntimeClass	OK
201 RuntimeClass	Created

Replace

replace the specified RuntimeClass

HTTP Request

PUT /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the RuntimeClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` RuntimeClass

Response

Code	Description
200 RuntimeClass	OK
201 RuntimeClass	Created

Delete

delete a RuntimeClass

HTTP Request

DELETE /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the RuntimeClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of RuntimeClass

HTTP Request

DELETE /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified RuntimeClass

HTTP Request

GET /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the RuntimeClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 RuntimeClass	OK

List

list or watch objects of kind RuntimeClass

HTTP Request

GET /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 RuntimeClassList	OK

Watch

watch changes to an object of kind RuntimeClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/node.k8s.io/v1/watch/runtimeclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the RuntimeClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of RuntimeClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/node.k8s.io/v1/watch/runtimeclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

SelfSubjectAccessReview v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`SelfSubjectAccessReview`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` SelfSubjectAccessReviewSpec	Spec holds information about the request being evaluated. user and groups must be empty
`status` SubjectAccessReviewStatus	Status is filled in by the server and indicates whether the request is allowed or not

SelfSubjectAccessReviewSpec v1 authorization

Appears In:

SelfSubjectAccessReview [authorization/v1]

Field	Description
`nonResourceAttributes` NonResourceAttributes	NonResourceAttributes describes information for a non-resource access request
`resourceAttributes` ResourceAttributes	ResourceAuthorizationAttributes describes information for a resource access request

Write Operations

Create

create a SelfSubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/selfsubjectaccessreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` SelfSubjectAccessReview

Response

Code	Description
200 SelfSubjectAccessReview	OK
201 SelfSubjectAccessReview	Created
202 SelfSubjectAccessReview	Accepted

SelfSubjectReview v1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1`	`SelfSubjectReview`

Other API versions of this object exist: v1beta1

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`status` SelfSubjectReviewStatus	Status is filled in by the server with the user attributes.

SelfSubjectReviewStatus v1 authentication

Appears In:

SelfSubjectReview [authentication/v1]

Field	Description
`userInfo` UserInfo	User attributes of the user making this request.

Write Operations

Create

create a SelfSubjectReview

HTTP Request

POST /apis/authentication.k8s.io/v1/selfsubjectreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` SelfSubjectReview

Response

Code	Description
200 SelfSubjectReview	OK
201 SelfSubjectReview	Created
202 SelfSubjectReview	Accepted

SelfSubjectRulesReview v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`SelfSubjectRulesReview`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` SelfSubjectRulesReviewSpec	Spec holds information about the request being evaluated.
`status` SubjectRulesReviewStatus	Status is filled in by the server and indicates the set of actions a user can perform.

SelfSubjectRulesReviewSpec v1 authorization

Appears In:

SelfSubjectRulesReview [authorization/v1]

Field	Description
`namespace` string	Namespace to evaluate rules for. Required.

Write Operations

Create

create a SelfSubjectRulesReview

HTTP Request

POST /apis/authorization.k8s.io/v1/selfsubjectrulesreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` SelfSubjectRulesReview

Response

Code	Description
200 SelfSubjectRulesReview	OK
201 SelfSubjectRulesReview	Created
202 SelfSubjectRulesReview	Accepted

ServiceAccount v1 core

Group	Version	Kind
`core`	`v1`	`ServiceAccount`

Appears In:

ServiceAccountList [core/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`automountServiceAccountToken` boolean	AutomountServiceAccountToken indicates whether pods running as this service account should have an API token automatically mounted. Can be overridden at the pod level.
`imagePullSecrets` LocalObjectReference array	ImagePullSecrets is a list of references to secrets in the same namespace to use for pulling any images in pods that reference this ServiceAccount. ImagePullSecrets are distinct from Secrets because Secrets can be mounted in the pod, but ImagePullSecrets are only accessed by the kubelet. More info: https://kubernetes.io/docs/concepts/containers/images/#specifying-imagepullsecrets-on-a-pod
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`secrets` ObjectReference array patch strategy: merge patch merge key: name	Secrets is a list of the secrets in the same namespace that pods running using this ServiceAccount are allowed to use. Pods are only limited to this list if this service account has a "kubernetes.io/enforce-mountable-secrets" annotation set to "true". The "kubernetes.io/enforce-mountable-secrets" annotation is deprecated since v1.32. Prefer separate namespaces to isolate access to mounted secrets. This field should not be used to find auto-generated service account token secrets for use outside of pods. Instead, tokens can be requested directly using the TokenRequest API, or service account token secrets can be manually created. More info: https://kubernetes.io/docs/concepts/configuration/secret

ServiceAccountList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ServiceAccount array	List of ServiceAccounts. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ServiceAccount

HTTP Request

POST /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ServiceAccount

Response

Code	Description
200 ServiceAccount	OK
201 ServiceAccount	Created
202 ServiceAccount	Accepted

Patch

partially update the specified ServiceAccount

HTTP Request

PATCH /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceAccount
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ServiceAccount	OK
201 ServiceAccount	Created

Replace

replace the specified ServiceAccount

HTTP Request

PUT /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceAccount
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ServiceAccount

Response

Code	Description
200 ServiceAccount	OK
201 ServiceAccount	Created

Delete

delete a ServiceAccount

HTTP Request

DELETE /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceAccount
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ServiceAccount	OK
202 ServiceAccount	Accepted

Delete Collection

delete collection of ServiceAccount

HTTP Request

DELETE /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ServiceAccount

HTTP Request

GET /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceAccount
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ServiceAccount	OK

List

list or watch objects of kind ServiceAccount

HTTP Request

GET /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ServiceAccountList	OK

List All Namespaces

list or watch objects of kind ServiceAccount

HTTP Request

GET /api/v1/serviceaccounts

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ServiceAccountList	OK

Watch

watch changes to an object of kind ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceAccount
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/serviceaccounts

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/serviceaccounts

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ServiceCIDR v1beta1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1beta1`	`ServiceCIDR`

Appears In:

ServiceCIDRList [networking/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` ServiceCIDRSpec	spec is the desired state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
`status` ServiceCIDRStatus	status represents the current state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ServiceCIDRSpec v1beta1 networking

Appears In:

ServiceCIDR [networking/v1beta1]

Field	Description
`cidrs` string array	CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.

ServiceCIDRStatus v1beta1 networking

Appears In:

ServiceCIDR [networking/v1beta1]

Field	Description
`conditions` Condition array patch strategy: merge patch merge key: type	conditions holds an array of metav1.Condition that describe the state of the ServiceCIDR. Current service state

ServiceCIDRList v1beta1 networking

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ServiceCIDR array	items is the list of ServiceCIDRs.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ServiceCIDR

HTTP Request

POST /apis/networking.k8s.io/v1beta1/servicecidrs

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ServiceCIDR

Response

Code	Description
200 ServiceCIDR	OK
201 ServiceCIDR	Created
202 ServiceCIDR	Accepted

Patch

partially update the specified ServiceCIDR

HTTP Request

PATCH /apis/networking.k8s.io/v1beta1/servicecidrs/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ServiceCIDR	OK
201 ServiceCIDR	Created

Replace

replace the specified ServiceCIDR

HTTP Request

PUT /apis/networking.k8s.io/v1beta1/servicecidrs/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ServiceCIDR

Response

Code	Description
200 ServiceCIDR	OK
201 ServiceCIDR	Created

Delete

delete a ServiceCIDR

HTTP Request

DELETE /apis/networking.k8s.io/v1beta1/servicecidrs/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ServiceCIDR

HTTP Request

DELETE /apis/networking.k8s.io/v1beta1/servicecidrs

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1beta1/servicecidrs/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ServiceCIDR	OK

List

list or watch objects of kind ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1beta1/servicecidrs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ServiceCIDRList	OK

Watch

watch changes to an object of kind ServiceCIDR. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1beta1/watch/servicecidrs/{name}

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ServiceCIDR. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1beta1/watch/servicecidrs

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ServiceCIDR

HTTP Request

PATCH /apis/networking.k8s.io/v1beta1/servicecidrs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ServiceCIDR	OK
201 ServiceCIDR	Created

Read Status

read status of the specified ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1beta1/servicecidrs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ServiceCIDR	OK

Replace Status

replace status of the specified ServiceCIDR

HTTP Request

PUT /apis/networking.k8s.io/v1beta1/servicecidrs/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ServiceCIDR

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ServiceCIDR

Response

Code	Description
200 ServiceCIDR	OK
201 ServiceCIDR	Created

StorageVersion v1alpha1 internal.apiserver.k8s.io

Group	Version	Kind
`internal.apiserver.k8s.io`	`v1alpha1`	`StorageVersion`

Appears In:

StorageVersionList [apiserverinternal/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	The name is <group>.<resource>.
`spec` StorageVersionSpec	Spec is an empty spec. It is here to comply with Kubernetes API style.
`status` StorageVersionStatus	API server instances report the version they can decode and the version they encode objects to when persisting objects in the backend.

StorageVersionSpec v1alpha1 apiserverinternal

Appears In:

StorageVersion [apiserverinternal/v1alpha1]

Field	Description

StorageVersionStatus v1alpha1 apiserverinternal

Appears In:

StorageVersion [apiserverinternal/v1alpha1]

Field	Description
`commonEncodingVersion` string	If all API server instances agree on the same encoding storage version, then this field is set to that version. Otherwise this field is left empty. API servers should finish updating its storageVersionStatus entry before serving write operations, so that this field will be in sync with the reality.
`conditions` StorageVersionCondition array	The latest available observations of the storageVersion's state.
`storageVersions` ServerStorageVersion array	The reported versions per API server instance.

StorageVersionList v1alpha1 apiserverinternal

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` StorageVersion array	Items holds a list of StorageVersion
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageVersion

HTTP Request

POST /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersion

Response

Code	Description
200 StorageVersion	OK
201 StorageVersion	Created
202 StorageVersion	Accepted

Patch

partially update the specified StorageVersion

HTTP Request

PATCH /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersion	OK
201 StorageVersion	Created

Replace

replace the specified StorageVersion

HTTP Request

PUT /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersion

Response

Code	Description
200 StorageVersion	OK
201 StorageVersion	Created

Delete

delete a StorageVersion

HTTP Request

DELETE /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of StorageVersion

HTTP Request

DELETE /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersion	OK

List

list or watch objects of kind StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StorageVersionList	OK

Watch

watch changes to an object of kind StorageVersion. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/watch/storageversions/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of StorageVersion. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/watch/storageversions

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified StorageVersion

HTTP Request

PATCH /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersion	OK
201 StorageVersion	Created

Read Status

read status of the specified StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersion	OK

Replace Status

replace status of the specified StorageVersion

HTTP Request

PUT /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersion

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersion

Response

Code	Description
200 StorageVersion	OK
201 StorageVersion	Created

StorageVersionMigration v1alpha1 storagemigration.k8s.io

Group	Version	Kind
`storagemigration.k8s.io`	`v1alpha1`	`StorageVersionMigration`

Appears In:

StorageVersionMigrationList [storagemigration/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` StorageVersionMigrationSpec	Specification of the migration.
`status` StorageVersionMigrationStatus	Status of the migration.

StorageVersionMigrationSpec v1alpha1 storagemigration

Appears In:

StorageVersionMigration [storagemigration/v1alpha1]

Field	Description
`continueToken` string	The token used in the list options to get the next chunk of objects to migrate. When the .status.conditions indicates the migration is "Running", users can use this token to check the progress of the migration.
`resource` GroupVersionResource	The resource that is being migrated. The migrator sends requests to the endpoint serving the resource. Immutable.

StorageVersionMigrationStatus v1alpha1 storagemigration

Appears In:

StorageVersionMigration [storagemigration/v1alpha1]

Field	Description
`conditions` MigrationCondition array patch strategy: merge patch merge key: type	The latest available observations of the migration's current state.
`resourceVersion` string	ResourceVersion to compare with the GC cache for performing the migration. This is the current resource version of given group, version and resource when kube-controller-manager first observes this StorageVersionMigration resource.

StorageVersionMigrationList v1alpha1 storagemigration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` StorageVersionMigration array patch strategy: merge patch merge key: type	Items is the list of StorageVersionMigration
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageVersionMigration

HTTP Request

POST /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created
202 StorageVersionMigration	Accepted

Patch

partially update the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Replace

replace the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Delete

delete a StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersionMigration	OK

List

list or watch objects of kind StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 StorageVersionMigrationList	OK

Watch

watch changes to an object of kind StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations/{name}

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

Read Status

read status of the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 StorageVersionMigration	OK

Replace Status

replace status of the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

Parameter	Description
`name`	name of the StorageVersionMigration

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` StorageVersionMigration

Response

Code	Description
200 StorageVersionMigration	OK
201 StorageVersionMigration	Created

SubjectAccessReview v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`SubjectAccessReview`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` SubjectAccessReviewSpec	Spec holds information about the request being evaluated
`status` SubjectAccessReviewStatus	Status is filled in by the server and indicates whether the request is allowed or not

SubjectAccessReviewSpec v1 authorization

Appears In:

LocalSubjectAccessReview [authorization/v1]
SubjectAccessReview [authorization/v1]

Field	Description
`extra` object	Extra corresponds to the user.Info.GetExtra() method from the authenticator. Since that is input to the authorizer it needs a reflection here.
`groups` string array	Groups is the groups you're testing for.
`nonResourceAttributes` NonResourceAttributes	NonResourceAttributes describes information for a non-resource access request
`resourceAttributes` ResourceAttributes	ResourceAuthorizationAttributes describes information for a resource access request
`uid` string	UID information about the requesting user.
`user` string	User is the user you're testing for. If you specify "User" but not "Groups", then is it interpreted as "What if User were not a member of any groups

SubjectAccessReviewStatus v1 authorization

Appears In:

LocalSubjectAccessReview [authorization/v1]
SelfSubjectAccessReview [authorization/v1]
SubjectAccessReview [authorization/v1]

Field	Description
`allowed` boolean	Allowed is required. True if the action would be allowed, false otherwise.
`denied` boolean	Denied is optional. True if the action would be denied, otherwise false. If both allowed is false and denied is false, then the authorizer has no opinion on whether to authorize the action. Denied may not be true if Allowed is true.
`evaluationError` string	EvaluationError is an indication that some error occurred during the authorization check. It is entirely possible to get an error and be able to continue determine authorization status in spite of it. For instance, RBAC can be missing a role, but enough roles are still present and bound to reason about the request.
`reason` string	Reason is optional. It indicates why a request was allowed or denied.

Write Operations

Create

create a SubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/subjectaccessreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` SubjectAccessReview

Response

Code	Description
200 SubjectAccessReview	OK
201 SubjectAccessReview	Created
202 SubjectAccessReview	Accepted

TokenRequest v1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1`	`TokenRequest`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` TokenRequestSpec	Spec holds information about the request being evaluated
`status` TokenRequestStatus	Status is filled in by the server and indicates whether the token can be authenticated.

TokenRequestSpec v1 authentication

Appears In:

TokenRequest [authentication/v1]

Field	Description
`audiences` string array	Audiences are the intendend audiences of the token. A recipient of a token must identify themself with an identifier in the list of audiences of the token, and otherwise should reject the token. A token issued for multiple audiences may be used to authenticate against any of the audiences listed but implies a high degree of trust between the target audiences.
`boundObjectRef` BoundObjectReference	BoundObjectRef is a reference to an object that the token will be bound to. The token will only be valid for as long as the bound object exists. NOTE: The API server's TokenReview endpoint will validate the BoundObjectRef, but other audiences may not. Keep ExpirationSeconds small if you want prompt revocation.
`expirationSeconds` integer	ExpirationSeconds is the requested duration of validity of the request. The token issuer may return a token with a different validity duration so a client needs to check the 'expiration' field in a response.

TokenRequestStatus v1 authentication

Appears In:

TokenRequest [authentication/v1]

Field	Description
`expirationTimestamp` Time	ExpirationTimestamp is the time of expiration of the returned token.
`token` string	Token is the opaque bearer token.

TokenReview v1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1`	`TokenReview`

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` TokenReviewSpec	Spec holds information about the request being evaluated
`status` TokenReviewStatus	Status is filled in by the server and indicates whether the request can be authenticated.

TokenReviewSpec v1 authentication

Appears In:

TokenReview [authentication/v1]

Field	Description
`audiences` string array	Audiences is a list of the identifiers that the resource server presented with the token identifies as. Audience-aware token authenticators will verify that the token was intended for at least one of the audiences in this list. If no audiences are provided, the audience will default to the audience of the Kubernetes apiserver.
`token` string	Token is the opaque bearer token.

TokenReviewStatus v1 authentication

Appears In:

TokenReview [authentication/v1]

Field	Description
`audiences` string array	Audiences are audience identifiers chosen by the authenticator that are compatible with both the TokenReview and token. An identifier is any identifier in the intersection of the TokenReviewSpec audiences and the token's audiences. A client of the TokenReview API that sets the spec.audiences field should validate that a compatible audience identifier is returned in the status.audiences field to ensure that the TokenReview server is audience aware. If a TokenReview returns an empty status.audience field where status.authenticated is "true", the token is valid against the audience of the Kubernetes API server.
`authenticated` boolean	Authenticated indicates that the token was associated with a known user.
`error` string	Error indicates that the token couldn't be checked
`user` UserInfo	User is the UserInfo associated with the provided token.

Write Operations

Create

create a TokenReview

HTTP Request

POST /apis/authentication.k8s.io/v1/tokenreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` TokenReview

Response

Code	Description
200 TokenReview	OK
201 TokenReview	Created
202 TokenReview	Accepted

NetworkPolicy v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`NetworkPolicy`

Appears In:

NetworkPolicyList [networking/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` NetworkPolicySpec	spec represents the specification of the desired behavior for this NetworkPolicy.

NetworkPolicySpec v1 networking

Appears In:

NetworkPolicy [networking/v1]

Field	Description
`egress` NetworkPolicyEgressRule array	egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
`ingress` NetworkPolicyIngressRule array	ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
`podSelector` LabelSelector	podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
`policyTypes` string array	policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8

NetworkPolicyList v1 networking

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` NetworkPolicy array	items is a list of schema objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a NetworkPolicy

HTTP Request

POST /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` NetworkPolicy

Response

Code	Description
200 NetworkPolicy	OK
201 NetworkPolicy	Created
202 NetworkPolicy	Accepted

Patch

partially update the specified NetworkPolicy

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the NetworkPolicy
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 NetworkPolicy	OK
201 NetworkPolicy	Created

Replace

replace the specified NetworkPolicy

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the NetworkPolicy
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` NetworkPolicy

Response

Code	Description
200 NetworkPolicy	OK
201 NetworkPolicy	Created

Delete

delete a NetworkPolicy

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the NetworkPolicy
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of NetworkPolicy

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the NetworkPolicy
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 NetworkPolicy	OK

List

list or watch objects of kind NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 NetworkPolicyList	OK

List All Namespaces

list or watch objects of kind NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/networkpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 NetworkPolicyList	OK

Watch

watch changes to an object of kind NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the NetworkPolicy
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/networkpolicies

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/networkpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Operations

patchCoreV1NamespacedPodResize

partially update resize of the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}/resize

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Pod	OK
201 Pod	Created

readCoreV1NamespacedPodResize

read resize of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/resize

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Pod	OK

replaceCoreV1NamespacedPodResize

replace resize of the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/resize

Path Parameters

Parameter	Description
`name`	name of the Pod
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Pod

Response

Code	Description
200 Pod	OK
201 Pod	Created

Definitions

This section contains definitions for objects used in the Kubernetes APIs.

APIGroup v1 meta

Group	Version	Kind
`meta`	`v1`	`APIGroup`

APIGroup contains the name, the supported versions, and the preferred version of a group.

Appears In:

APIGroupList [meta/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	name is the name of the group.
`preferredVersion` GroupVersionForDiscovery	preferredVersion is the version preferred by the API server, which probably is the storage version.
`serverAddressByClientCIDRs` ServerAddressByClientCIDR array	a map of client CIDR to server address that is serving this group. This is to help clients reach servers in the most network-efficient way possible. Clients can use the appropriate server address as per the CIDR that they match. In case of multiple matches, clients should use the longest matching CIDR. The server returns only those CIDRs that it thinks that the client can match. For example: the master will return an internal IP CIDR only, if the client reaches the server using an internal IP. Server looks at X-Forwarded-For header or X-Real-Ip header or request.RemoteAddr (in that order) to get the client IP.
`versions` GroupVersionForDiscovery array	versions are the versions supported in this group.

APIResource v1 meta

Group	Version	Kind
`meta`	`v1`	`APIResource`

APIResource specifies the name of a resource and whether it is namespaced.

Appears In:

APIResourceList [meta/v1]

Field	Description
`categories` string array	categories is a list of the grouped resources this resource belongs to (e.g. 'all')
`group` string	group is the preferred group of the resource. Empty implies the group of the containing resource list. For subresources, this may have a different value, for example: Scale".
`kind` string	kind is the kind for the resource (e.g. 'Foo' is the kind for a resource 'foo')
`name` string	name is the plural name of the resource.
`namespaced` boolean	namespaced indicates if a resource is namespaced or not.
`shortNames` string array	shortNames is a list of suggested short names of the resource.
`singularName` string	singularName is the singular name of the resource. This allows clients to handle plural and singular opaquely. The singularName is more correct for reporting status on a single item and both singular and plural are allowed from the kubectl CLI interface.
`storageVersionHash` string	The hash value of the storage version, the version this resource is converted to when written to the data store. Value must be treated as opaque by clients. Only equality comparison on the value is valid. This is an alpha feature and may change or be removed in the future. The field is populated by the apiserver only if the StorageVersionHash feature gate is enabled. This field will remain optional even if it graduates.
`verbs` string array	verbs is a list of supported kube verbs (this includes get, list, watch, create, update, patch, delete, deletecollection, and proxy)
`version` string	version is the preferred version of the resource. Empty implies the version of the containing resource list For subresources, this may have a different value, for example: v1 (while inside a v1beta1 version of the core resource's group)".

APIServiceCondition v1 apiregistration.k8s.io

Group	Version	Kind
`apiregistration.k8s.io`	`v1`	`APIServiceCondition`

APIServiceCondition describes the state of an APIService at a particular point

Appears In:

APIServiceStatus [apiregistration/v1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	Human-readable message indicating details about last transition.
`reason` string	Unique, one-word, CamelCase reason for the condition's last transition.
`status` string	Status is the status of the condition. Can be True, False, Unknown.
`type` string	Type is the type of the condition.

APIVersions v1 meta

Group	Version	Kind
`meta`	`v1`	`APIVersions`

APIVersions lists the versions that are available, to allow clients to discover the API at /api, which is the root path of the legacy v1 API.

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`serverAddressByClientCIDRs` ServerAddressByClientCIDR array	a map of client CIDR to server address that is serving this group. This is to help clients reach servers in the most network-efficient way possible. Clients can use the appropriate server address as per the CIDR that they match. In case of multiple matches, clients should use the longest matching CIDR. The server returns only those CIDRs that it thinks that the client can match. For example: the master will return an internal IP CIDR only, if the client reaches the server using an internal IP. Server looks at X-Forwarded-For header or X-Real-Ip header or request.RemoteAddr (in that order) to get the client IP.
`versions` string array	versions are the api versions that are available.

AWSElasticBlockStoreVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`AWSElasticBlockStoreVolumeSource`

Represents a Persistent Disk resource in AWS. An AWS EBS disk must exist before mounting to a container. The disk must also be in the same AWS zone as the kubelet. An AWS EBS disk can only be mounted as read/write once. AWS EBS volumes support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
`partition` integer	partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).
`readOnly` boolean	readOnly value true will force the readOnly setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
`volumeID` string	volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

Affinity v1 core

Group	Version	Kind
`core`	`v1`	`Affinity`

Affinity is a group of affinity scheduling rules.

Appears In:

PodSpec [core/v1]

Field	Description
`nodeAffinity` NodeAffinity	Describes node affinity scheduling rules for the pod.
`podAffinity` PodAffinity	Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).
`podAntiAffinity` PodAntiAffinity	Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

AggregationRule v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`AggregationRule`

AggregationRule describes how to locate ClusterRoles to aggregate into the ClusterRole

Appears In:

ClusterRole [rbac/v1]

Field	Description
`clusterRoleSelectors` LabelSelector array	ClusterRoleSelectors holds a list of selectors which will be used to find ClusterRoles and create the rules. If any of the selectors match, then the ClusterRole's permissions will be added

AllocatedDeviceStatus v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`AllocatedDeviceStatus`

AllocatedDeviceStatus contains the status of an allocated device, if the driver chooses to report it. This may include driver-specific information.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceClaimStatus [resource/v1beta1]

Field	Description
`conditions` Condition array	Conditions contains the latest observation of the device's state. If the device has been configured according to the class and claim config references, the `Ready` condition should be True.
`data`	Data contains arbitrary driver-specific data. The length of the raw data must be smaller or equal to 10 Ki.
`device` string	Device references one device instance via its name in the driver's resource pool. It must be a DNS label.
`driver` string	Driver specifies the name of the DRA driver whose kubelet plugin should be invoked to process the allocation once the claim is needed on a node. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`networkData` NetworkDeviceData	NetworkData contains network-related information specific to the device.
`pool` string	This name together with the driver name and the device name field identify which device was allocated (`<driver name>/<pool name>/<device name>`). Must not be longer than 253 characters and may contain one or more DNS sub-domains separated by slashes.

AllocationResult v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`AllocationResult`

AllocationResult contains attributes of an allocated resource.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceClaimStatus [resource/v1beta1]

Field	Description
`devices` DeviceAllocationResult	Devices is the result of allocating devices.
`nodeSelector` NodeSelector	NodeSelector defines where the allocated resources are available. If unset, they are available everywhere.

AppArmorProfile v1 core

Group	Version	Kind
`core`	`v1`	`AppArmorProfile`

AppArmorProfile defines a pod or container's AppArmor settings.

Appears In:

PodSecurityContext [core/v1]
SecurityContext [core/v1]

Field	Description
`localhostProfile` string	localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
`type` string	type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.

ApplyConfiguration v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`ApplyConfiguration`

ApplyConfiguration defines the desired configuration values of an object.

Appears In:

Mutation [admissionregistration/v1alpha1]

Field Description

expression
string expression will be evaluated by CEL to create an apply configuration. ref: https://github.com/google/cel-spec Apply configurations are declared in CEL using object initialization. For example, this CEL expression returns an apply configuration to set a single field: Object{ spec: Object.spec{ serviceAccountName: "example" } } Apply configurations may not modify atomic structs, maps or arrays due to the risk of accidental deletion of values not included in the apply configuration. CEL expressions have access to the object types needed to create apply configurations: - 'Object' - CEL type of the resource object. - 'Object.<fieldName>' - CEL type of object field (such as 'Object.spec') - 'Object.<fieldName1>.<fieldName2>...<fieldNameN>` - CEL type of nested field (such as 'Object.spec.containers') CEL expressions have access to the contents of the API request, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Required.

AttachedVolume v1 core

Group	Version	Kind
`core`	`v1`	`AttachedVolume`

AttachedVolume describes a volume attached to a node

Appears In:

NodeStatus [core/v1]

Field	Description
`devicePath` string	DevicePath represents the device path where the volume should be available
`name` string	Name of the attached volume

AuditAnnotation v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`AuditAnnotation`

AuditAnnotation describes how to produce an audit annotation for an API request.

Other API versions of this object exist: v1beta1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1]

Field Description

key
string key specifies the audit annotation key. The audit annotation keys of a ValidatingAdmissionPolicy must be unique. The key must be a qualified name ([A-Za-z0-9][-A-Za-z0-9_.]*) no more than 63 bytes in length. The key is combined with the resource name of the ValidatingAdmissionPolicy to construct an audit annotation key: "{ValidatingAdmissionPolicy name}/{key}". If an admission webhook uses the same resource name as this ValidatingAdmissionPolicy and the same audit annotation key, the annotation key will be identical. In this case, the first annotation written with the key will be included in the audit event and all subsequent annotations with the same key will be discarded. Required.

valueExpression
string valueExpression represents the expression which is evaluated by CEL to produce an audit annotation value. The expression must evaluate to either a string or null value. If the expression evaluates to a string, the audit annotation is included with the string value. If the expression evaluates to null or empty string the audit annotation will be omitted. The valueExpression may be no longer than 5kb in length. If the result of the valueExpression is more than 10kb in length, it will be truncated to 10kb. If multiple ValidatingAdmissionPolicyBinding resources match an API request, then the valueExpression will be evaluated for each binding. All unique values produced by the valueExpressions will be joined together in a comma-separated list. Required.

AzureDiskVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`AzureDiskVolumeSource`

AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`cachingMode` string	cachingMode is the Host Caching mode: None, Read Only, Read Write.
`diskName` string	diskName is the Name of the data disk in the blob storage
`diskURI` string	diskURI is the URI of data disk in the blob storage
`fsType` string	fsType is Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`kind` string	kind expected values are Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set). defaults to shared
`readOnly` boolean	readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

AzureFilePersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`AzureFilePersistentVolumeSource`

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretName` string	secretName is the name of secret that contains Azure Storage Account Name and Key
`secretNamespace` string	secretNamespace is the namespace of the secret that contains Azure Storage Account Name and Key default is the same as the Pod
`shareName` string	shareName is the azure Share Name

AzureFileVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`AzureFileVolumeSource`

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

Appears In:

Volume [core/v1]

Field	Description
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretName` string	secretName is the name of secret that contains Azure Storage Account Name and Key
`shareName` string	shareName is the azure share Name

BasicDevice v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`BasicDevice`

BasicDevice defines one device instance.

Other API versions of this object exist: v1alpha3

Appears In:

Device [resource/v1beta1]

Field	Description
`attributes` object	Attributes defines the set of attributes for this device. The name of each attribute must be unique in that set. The maximum number of attributes and capacities combined is 32.
`capacity` object	Capacity defines the set of capacities for this device. The name of each capacity must be unique in that set. The maximum number of attributes and capacities combined is 32.

BoundObjectReference v1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1`	`BoundObjectReference`

BoundObjectReference is a reference to an object that a token is bound to.

Appears In:

TokenRequestSpec [authentication/v1]

Field	Description
`apiVersion` string	API version of the referent.
`kind` string	Kind of the referent. Valid kinds are 'Pod' and 'Secret'.
`name` string	Name of the referent.
`uid` string	UID of the referent.

CELDeviceSelector v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`CELDeviceSelector`

CELDeviceSelector contains a CEL expression for selecting a device.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceSelector [resource/v1beta1]

Field Description

expression
string Expression is a CEL expression which evaluates a single device. It must evaluate to true when the device under consideration satisfies the desired criteria, and false when it does not. Any other result is an error and causes allocation of devices to abort. The expression's input is an object named "device", which carries the following properties: - driver (string): the name of the driver which defines this device. - attributes (map[string]object): the device's attributes, grouped by prefix (e.g. device.attributes["dra.example.com"] evaluates to an object with all of the attributes which were prefixed by "dra.example.com". - capacity (map[string]object): the device's capacities, grouped by prefix. Example: Consider a device with driver="dra.example.com", which exposes two attributes named "model" and "ext.example.com/family" and which exposes one capacity named "modules". This input to this expression would have the following fields: device.driver device.attributes["dra.example.com"].model device.attributes["ext.example.com"].family device.capacity["dra.example.com"].modules The device.driver field can be used to check for a specific driver, either as a high-level precondition (i.e. you only want to consider devices from this driver) or as part of a multi-clause expression that is meant to consider devices from different drivers. The value type of each attribute is defined by the device definition, and users who write these expressions must consult the documentation for their specific drivers. The value type of each capacity is Quantity. If an unknown prefix is used as a lookup in either device.attributes or device.capacity, an empty map will be returned. Any reference to an unknown field will cause an evaluation error and allocation to abort. A robust expression should check for the existence of attributes before referencing them. For ease of use, the cel.bind() function is enabled, and can be used to simplify expressions that access multiple attributes with the same domain. For example: cel.bind(dra, device.attributes["dra.example.com"], dra.someBool && dra.anotherBool) The length of the expression must be smaller or equal to 10 Ki. The cost of evaluating it is also limited based on the estimated number of logical steps.

CSINodeDriver v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`CSINodeDriver`

CSINodeDriver holds information about the specification of one CSI driver installed on a node

Appears In:

CSINodeSpec [storage/v1]

Field	Description
`allocatable` VolumeNodeResources	allocatable represents the volume resources of a node that are available for scheduling. This field is beta.
`name` string	name represents the name of the CSI driver that this object refers to. This MUST be the same name returned by the CSI GetPluginName() call for that driver.
`nodeID` string	nodeID of the node from the driver point of view. This field enables Kubernetes to communicate with storage systems that do not share the same nomenclature for nodes. For example, Kubernetes may refer to a given node as "node1", but the storage system may refer to the same node as "nodeA". When Kubernetes issues a command to the storage system to attach a volume to a specific node, it can use this field to refer to the node name using the ID that the storage system will understand, e.g. "nodeA" instead of "node1". This field is required.
`topologyKeys` string array	topologyKeys is the list of keys supported by the driver. When a driver is initialized on a cluster, it provides a set of topology keys that it understands (e.g. "company.com/zone", "company.com/region"). When a driver is initialized on a node, it provides the same topology keys along with values. Kubelet will expose these topology keys as labels on its own node object. When Kubernetes does topology aware provisioning, it can use this list to determine which labels it should retrieve from the node object and pass back to the driver. It is possible for different nodes to use different topology keys. This can be empty if driver does not support topology.

CSIPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CSIPersistentVolumeSource`

Represents storage that is managed by an external CSI volume driver

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`controllerExpandSecretRef` SecretReference	controllerExpandSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerExpandVolume call. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
`controllerPublishSecretRef` SecretReference	controllerPublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerPublishVolume and ControllerUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
`driver` string	driver is the name of the driver to use for this volume. Required.
`fsType` string	fsType to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs".
`nodeExpandSecretRef` SecretReference	nodeExpandSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeExpandVolume call. This field is optional, may be omitted if no secret is required. If the secret object contains more than one secret, all secrets are passed.
`nodePublishSecretRef` SecretReference	nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
`nodeStageSecretRef` SecretReference	nodeStageSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeStageVolume and NodeStageVolume and NodeUnstageVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
`readOnly` boolean	readOnly value to pass to ControllerPublishVolumeRequest. Defaults to false (read/write).
`volumeAttributes` object	volumeAttributes of the volume to publish.
`volumeHandle` string	volumeHandle is the unique volume name returned by the CSI volume plugin’s CreateVolume to refer to the volume on all subsequent calls. Required.

CSIVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CSIVolumeSource`

Represents a source location of a volume to mount, managed by an external CSI driver

Appears In:

Volume [core/v1]

Field	Description
`driver` string	driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster.
`fsType` string	fsType to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply.
`nodePublishSecretRef` LocalObjectReference	nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secret references are passed.
`readOnly` boolean	readOnly specifies a read-only configuration for the volume. Defaults to false (read/write).
`volumeAttributes` object	volumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver's documentation for supported values.

Capabilities v1 core

Group	Version	Kind
`core`	`v1`	`Capabilities`

Adds and removes POSIX capabilities from running containers.

Appears In:

SecurityContext [core/v1]

Field	Description
`add` string array	Added capabilities
`drop` string array	Removed capabilities

CephFSPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CephFSPersistentVolumeSource`

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`monitors` string array	monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`path` string	path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /
`readOnly` boolean	readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`secretFile` string	secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`secretRef` SecretReference	secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`user` string	user is Optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

CephFSVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CephFSVolumeSource`

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`monitors` string array	monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`path` string	path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /
`readOnly` boolean	readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`secretFile` string	secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`secretRef` LocalObjectReference	secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
`user` string	user is optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

CertificateSigningRequestCondition v1 certificates.k8s.io

Group	Version	Kind
`certificates.k8s.io`	`v1`	`CertificateSigningRequestCondition`

CertificateSigningRequestCondition describes a condition of a CertificateSigningRequest object

Appears In:

CertificateSigningRequestStatus [certificates/v1]

Field	Description
`lastTransitionTime` Time	lastTransitionTime is the time the condition last transitioned from one status to another. If unset, when a new condition type is added or an existing condition's status is changed, the server defaults this to the current time.
`lastUpdateTime` Time	lastUpdateTime is the time of the last update to this condition
`message` string	message contains a human readable message with details about the request state
`reason` string	reason indicates a brief reason for the request state
`status` string	status of the condition, one of True, False, Unknown. Approved, Denied, and Failed conditions may not be "False" or "Unknown".
`type` string	type of the condition. Known conditions are "Approved", "Denied", and "Failed". An "Approved" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer. A "Denied" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer. A "Failed" condition is added via the /status subresource, indicating the signer failed to issue the certificate. Approved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added. Only one condition of a given type is allowed.

CinderPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CinderPersistentVolumeSource`

Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`fsType` string	fsType Filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`readOnly` boolean	readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`secretRef` SecretReference	secretRef is Optional: points to a secret object containing parameters used to connect to OpenStack.
`volumeID` string	volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

CinderVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`CinderVolumeSource`

Appears In:

Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
`secretRef` LocalObjectReference	secretRef is optional: points to a secret object containing parameters used to connect to OpenStack.
`volumeID` string	volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

ClientIPConfig v1 core

Group	Version	Kind
`core`	`v1`	`ClientIPConfig`

ClientIPConfig represents the configurations of Client IP based session affinity.

Appears In:

SessionAffinityConfig [core/v1]

Field	Description
`timeoutSeconds` integer	timeoutSeconds specifies the seconds of ClientIP type session sticky time. The value must be >0 && <=86400(for 1 day) if ServiceAffinity == "ClientIP". Default value is 10800(for 3 hours).

ClusterTrustBundleProjection v1 core

Group	Version	Kind
`core`	`v1`	`ClusterTrustBundleProjection`

ClusterTrustBundleProjection describes how to select a set of ClusterTrustBundle objects and project their contents into the pod filesystem.

Appears In:

VolumeProjection [core/v1]

Field	Description
`labelSelector` LabelSelector	Select all ClusterTrustBundles that match this label selector. Only has effect if signerName is set. Mutually-exclusive with name. If unset, interpreted as "match nothing". If set but empty, interpreted as "match everything".
`name` string	Select a single ClusterTrustBundle by object name. Mutually-exclusive with signerName and labelSelector.
`optional` boolean	If true, don't block pod startup if the referenced ClusterTrustBundle(s) aren't available. If using name, then the named ClusterTrustBundle is allowed not to exist. If using signerName, then the combination of signerName and labelSelector is allowed to match zero ClusterTrustBundles.
`path` string	Relative path from the volume root to write the bundle.
`signerName` string	Select all ClusterTrustBundles that match this signer name. Mutually-exclusive with name. The contents of all selected ClusterTrustBundles will be unified and deduplicated.

ComponentCondition v1 core

Group	Version	Kind
`core`	`v1`	`ComponentCondition`

Information about the condition of a component.

Appears In:

ComponentStatus [core/v1]

Field	Description
`error` string	Condition error code for a component. For example, a health check error code.
`message` string	Message about the condition for a component. For example, information about a health check.
`status` string	Status of the condition for a component. Valid values for "Healthy": "True", "False", or "Unknown".
`type` string	Type of condition for a component. Valid value: "Healthy"

Condition v1 meta

Group	Version	Kind
`meta`	`v1`	`Condition`

Condition contains details for one aspect of the current state of this API Resource.

Appears In:

AllocatedDeviceStatus [resource/v1beta1]
AllocatedDeviceStatus [resource/v1alpha3]
PodDisruptionBudgetStatus [policy/v1]
ServiceCIDRStatus [networking/v1beta1]
ServiceStatus [core/v1]
ValidatingAdmissionPolicyStatus [admissionregistration/v1]
ValidatingAdmissionPolicyStatus [admissionregistration/v1beta1]

Field	Description
`lastTransitionTime` Time	lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.
`message` string	message is a human readable message indicating details about the transition. This may be an empty string.
`observedGeneration` integer	observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.
`reason` string	reason contains a programmatic identifier indicating the reason for the condition's last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.
`status` string	status of the condition, one of True, False, Unknown.
`type` string	type of condition in CamelCase or in foo.example.com/CamelCase.

ConfigMapEnvSource v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMapEnvSource`

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with. The contents of the target ConfigMap's Data field will represent the key-value pairs as environment variables.

Appears In:

EnvFromSource [core/v1]

Field	Description
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	Specify whether the ConfigMap must be defined

ConfigMapKeySelector v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMapKeySelector`

Selects a key from a ConfigMap.

Appears In:

EnvVarSource [core/v1]

Field	Description
`key` string	The key to select.
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	Specify whether the ConfigMap or its key must be defined

ConfigMapNodeConfigSource v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMapNodeConfigSource`

ConfigMapNodeConfigSource contains the information to reference a ConfigMap as a config source for the Node. This API is deprecated since 1.22: https://git.k8s.io/enhancements/keps/sig-node/281-dynamic-kubelet-configuration

Appears In:

NodeConfigSource [core/v1]

Field	Description
`kubeletConfigKey` string	KubeletConfigKey declares which key of the referenced ConfigMap corresponds to the KubeletConfiguration structure This field is required in all cases.
`name` string	Name is the metadata.name of the referenced ConfigMap. This field is required in all cases.
`namespace` string	Namespace is the metadata.namespace of the referenced ConfigMap. This field is required in all cases.
`resourceVersion` string	ResourceVersion is the metadata.ResourceVersion of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status.
`uid` string	UID is the metadata.UID of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status.

ConfigMapProjection v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMapProjection`

Adapts a ConfigMap into a projected volume. The contents of the target ConfigMap's Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.

Appears In:

VolumeProjection [core/v1]

Field	Description
`items` KeyToPath array	items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	optional specify whether the ConfigMap or its keys must be defined

ConfigMapVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ConfigMapVolumeSource`

Adapts a ConfigMap into a volume. The contents of the target ConfigMap's Data field will be presented in a volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. ConfigMap volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`defaultMode` integer	defaultMode is optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
`items` KeyToPath array	items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	optional specify whether the ConfigMap or its keys must be defined

ContainerImage v1 core

Group	Version	Kind
`core`	`v1`	`ContainerImage`

Describe a container image

Appears In:

NodeStatus [core/v1]

Field	Description
`names` string array	Names by which this image is known. e.g. ["kubernetes.example/hyperkube:v1.0.7", "cloud-vendor.registry.example/cloud-vendor/hyperkube:v1.0.7"]
`sizeBytes` integer	The size of the image in bytes.

ContainerPort v1 core

Group	Version	Kind
`core`	`v1`	`ContainerPort`

ContainerPort represents a network port in a single container.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`containerPort` integer	Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
`hostIP` string	What host IP to bind the external port to.
`hostPort` integer	Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
`name` string	If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
`protocol` string	Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

ContainerResizePolicy v1 core

Group	Version	Kind
`core`	`v1`	`ContainerResizePolicy`

ContainerResizePolicy represents resource resize policy for the container.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`resourceName` string	Name of the resource to which this resource resize policy applies. Supported values: cpu, memory.
`restartPolicy` string	Restart policy to apply when specified resource is resized. If not specified, it defaults to NotRequired.

ContainerResourceMetricSource v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ContainerResourceMetricSource`

ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.

Appears In:

MetricSpec [autoscaling/v2]

Field	Description
`container` string	container is the name of the container in the pods of the scaling target
`name` string	name is the name of the resource in question.
`target` MetricTarget	target specifies the target value for the given metric

ContainerResourceMetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ContainerResourceMetricStatus`

ContainerResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.

Appears In:

MetricStatus [autoscaling/v2]

Field	Description
`container` string	container is the name of the container in the pods of the scaling target
`current` MetricValueStatus	current contains the current value for the given metric
`name` string	name is the name of the resource in question.

ContainerState v1 core

Group	Version	Kind
`core`	`v1`	`ContainerState`

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Appears In:

ContainerStatus [core/v1]

Field	Description
`running` ContainerStateRunning	Details about a running container
`terminated` ContainerStateTerminated	Details about a terminated container
`waiting` ContainerStateWaiting	Details about a waiting container

ContainerStateRunning v1 core

Group	Version	Kind
`core`	`v1`	`ContainerStateRunning`

ContainerStateRunning is a running state of a container.

Appears In:

ContainerState [core/v1]

Field	Description
`startedAt` Time	Time at which the container was last (re-)started

ContainerStateTerminated v1 core

Group	Version	Kind
`core`	`v1`	`ContainerStateTerminated`

ContainerStateTerminated is a terminated state of a container.

Appears In:

ContainerState [core/v1]

Field	Description
`containerID` string	Container's ID in the format '<type>://<container_id>'
`exitCode` integer	Exit status from the last termination of the container
`finishedAt` Time	Time at which the container last terminated
`message` string	Message regarding the last termination of the container
`reason` string	(brief) reason from the last termination of the container
`signal` integer	Signal from the last termination of the container
`startedAt` Time	Time at which previous execution of the container started

ContainerStateWaiting v1 core

Group	Version	Kind
`core`	`v1`	`ContainerStateWaiting`

ContainerStateWaiting is a waiting state of a container.

Appears In:

ContainerState [core/v1]

Field	Description
`message` string	Message regarding why the container is not yet running.
`reason` string	(brief) reason the container is not yet running.

ContainerUser v1 core

Group	Version	Kind
`core`	`v1`	`ContainerUser`

ContainerUser represents user identity information

Appears In:

ContainerStatus [core/v1]

Field	Description
`linux` LinuxContainerUser	Linux holds user identity information initially attached to the first process of the containers in Linux. Note that the actual running identity can be changed if the process has enough privilege to do so.

CrossVersionObjectReference v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`CrossVersionObjectReference`

CrossVersionObjectReference contains enough information to let you identify the referred resource.

Other API versions of this object exist: v1

Appears In:

HorizontalPodAutoscalerSpec [autoscaling/v2]
ObjectMetricSource [autoscaling/v2]
ObjectMetricStatus [autoscaling/v2]

Field	Description
`apiVersion` string	apiVersion is the API version of the referent
`kind` string	kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

CustomResourceColumnDefinition v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceColumnDefinition`

CustomResourceColumnDefinition specifies a column for server side printing.

Appears In:

CustomResourceDefinitionVersion [apiextensions/v1]

Field	Description
`description` string	description is a human readable description of this column.
`format` string	format is an optional OpenAPI type definition for this column. The 'name' format is applied to the primary identifier column to assist in clients identifying column is the resource name. See https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#data-types for details.
`jsonPath` string	jsonPath is a simple JSON path (i.e. with array notation) which is evaluated against each custom resource to produce the value for this column.
`name` string	name is a human readable name for the column.
`priority` integer	priority is an integer defining the relative importance of this column compared to others. Lower numbers are considered higher priority. Columns that may be omitted in limited space scenarios should be given a priority greater than 0.
`type` string	type is an OpenAPI type definition for this column. See https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#data-types for details.

CustomResourceConversion v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceConversion`

CustomResourceConversion describes how to convert different versions of a CR.

Appears In:

CustomResourceDefinitionSpec [apiextensions/v1]

Field Description

strategy
string strategy specifies how custom resources are converted between versions. Allowed values are: - `"None"`: The converter only change the apiVersion and would not touch any other field in the custom resource. - `"Webhook"`: API Server will call to an external webhook to do the conversion. Additional information is needed for this option. This requires spec.preserveUnknownFields to be false, and spec.conversion.webhook to be set.

webhook
WebhookConversion webhook describes how to call the conversion webhook. Required when `strategy` is set to `"Webhook"`.

CustomResourceDefinitionCondition v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceDefinitionCondition`

CustomResourceDefinitionCondition contains details for the current condition of this pod.

Appears In:

CustomResourceDefinitionStatus [apiextensions/v1]

Field	Description
`lastTransitionTime` Time	lastTransitionTime last time the condition transitioned from one status to another.
`message` string	message is a human-readable message indicating details about last transition.
`reason` string	reason is a unique, one-word, CamelCase reason for the condition's last transition.
`status` string	status is the status of the condition. Can be True, False, Unknown.
`type` string	type is the type of the condition. Types include Established, NamesAccepted and Terminating.

CustomResourceDefinitionNames v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceDefinitionNames`

CustomResourceDefinitionNames indicates the names to serve this CustomResourceDefinition

Appears In:

CustomResourceDefinitionSpec [apiextensions/v1]
CustomResourceDefinitionStatus [apiextensions/v1]

Field	Description
`categories` string array	categories is a list of grouped resources this custom resource belongs to (e.g. 'all'). This is published in API discovery documents, and used by clients to support invocations like `kubectl get all`.
`kind` string	kind is the serialized kind of the resource. It is normally CamelCase and singular. Custom resource instances will use this value as the `kind` attribute in API calls.
`listKind` string	listKind is the serialized kind of the list for this resource. Defaults to "`kind`List".
`plural` string	plural is the plural name of the resource to serve. The custom resources are served under `/apis/<group>/<version>/.../<plural>`. Must match the name of the CustomResourceDefinition (in the form `<names.plural>.<group>`). Must be all lowercase.
`shortNames` string array	shortNames are short names for the resource, exposed in API discovery documents, and used by clients to support invocations like `kubectl get <shortname>`. It must be all lowercase.
`singular` string	singular is the singular name of the resource. It must be all lowercase. Defaults to lowercased `kind`.

CustomResourceDefinitionVersion v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceDefinitionVersion`

CustomResourceDefinitionVersion describes a version for CRD.

Appears In:

CustomResourceDefinitionSpec [apiextensions/v1]

Field	Description
`additionalPrinterColumns` CustomResourceColumnDefinition array	additionalPrinterColumns specifies additional columns returned in Table output. See https://kubernetes.io/docs/reference/using-api/api-concepts/#receiving-resources-as-tables for details. If no columns are specified, a single column displaying the age of the custom resource is used.
`deprecated` boolean	deprecated indicates this version of the custom resource API is deprecated. When set to true, API requests to this version receive a warning header in the server response. Defaults to false.
`deprecationWarning` string	deprecationWarning overrides the default warning returned to API clients. May only be set when `deprecated` is true. The default warning indicates this version is deprecated and recommends use of the newest served version of equal or greater stability, if one exists.
`name` string	name is the version name, e.g. “v1”, “v2beta1”, etc. The custom resources are served under this version at `/apis/<group>/<version>/...` if `served` is true.
`schema` CustomResourceValidation	schema describes the schema used for validation, pruning, and defaulting of this version of the custom resource.
`selectableFields` SelectableField array	selectableFields specifies paths to fields that may be used as field selectors. A maximum of 8 selectable fields are allowed. See https://kubernetes.io/docs/concepts/overview/working-with-objects/field-selectors
`served` boolean	served is a flag enabling/disabling this version from being served via REST APIs
`storage` boolean	storage indicates this version should be used when persisting custom resources to storage. There must be exactly one version with storage=true.
`subresources` CustomResourceSubresources	subresources specify what subresources this version of the defined custom resource have.

CustomResourceSubresourceScale v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceSubresourceScale`

CustomResourceSubresourceScale defines how to serve the scale subresource for CustomResources.

Appears In:

CustomResourceSubresources [apiextensions/v1]

Field	Description
`labelSelectorPath` string	labelSelectorPath defines the JSON path inside of a custom resource that corresponds to Scale `status.selector`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.status` or `.spec`. Must be set to work with HorizontalPodAutoscaler. The field pointed by this JSON path must be a string field (not a complex selector struct) which contains a serialized label selector in string form. More info: https://kubernetes.io/docs/tasks/access-kubernetes-api/custom-resources/custom-resource-definitions#scale-subresource If there is no value under the given path in the custom resource, the `status.selector` value in the `/scale` subresource will default to the empty string.
`specReplicasPath` string	specReplicasPath defines the JSON path inside of a custom resource that corresponds to Scale `spec.replicas`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.spec`. If there is no value under the given path in the custom resource, the `/scale` subresource will return an error on GET.
`statusReplicasPath` string	statusReplicasPath defines the JSON path inside of a custom resource that corresponds to Scale `status.replicas`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.status`. If there is no value under the given path in the custom resource, the `status.replicas` value in the `/scale` subresource will default to 0.

CustomResourceSubresourceStatus v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceSubresourceStatus`

CustomResourceSubresourceStatus defines how to serve the status subresource for CustomResources. Status is represented by the `.status` JSON path inside of a CustomResource. When set, * exposes a /status subresource for the custom resource * PUT requests to the /status subresource take a custom resource object, and ignore changes to anything except the status stanza * PUT/POST/PATCH requests to the custom resource ignore changes to the status stanza

Appears In:

CustomResourceSubresources [apiextensions/v1]

Field	Description

CustomResourceSubresources v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceSubresources`

CustomResourceSubresources defines the status and scale subresources for CustomResources.

Appears In:

CustomResourceDefinitionVersion [apiextensions/v1]

Field	Description
`scale` CustomResourceSubresourceScale	scale indicates the custom resource should serve a `/scale` subresource that returns an `autoscaling/v1` Scale object.
`status` CustomResourceSubresourceStatus	status indicates the custom resource should serve a `/status` subresource. When enabled: 1. requests to the custom resource primary endpoint ignore changes to the `status` stanza of the object. 2. requests to the custom resource `/status` subresource ignore changes to anything other than the `status` stanza of the object.

CustomResourceValidation v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`CustomResourceValidation`

CustomResourceValidation is a list of validation methods for CustomResources.

Appears In:

CustomResourceDefinitionVersion [apiextensions/v1]

Field	Description
`openAPIV3Schema` JSONSchemaProps	openAPIV3Schema is the OpenAPI v3 schema to use for validation and pruning.

DaemonEndpoint v1 core

Group	Version	Kind
`core`	`v1`	`DaemonEndpoint`

DaemonEndpoint contains information about a single Daemon endpoint.

Appears In:

NodeDaemonEndpoints [core/v1]

Field	Description
`Port` integer	Port number of the given endpoint.

DaemonSetCondition v1 apps

Group	Version	Kind
`apps`	`v1`	`DaemonSetCondition`

DaemonSetCondition describes the state of a DaemonSet at a certain point.

Appears In:

DaemonSetStatus [apps/v1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of DaemonSet condition.

DaemonSetUpdateStrategy v1 apps

Group	Version	Kind
`apps`	`v1`	`DaemonSetUpdateStrategy`

DaemonSetUpdateStrategy is a struct used to control the update strategy for a DaemonSet.

Appears In:

DaemonSetSpec [apps/v1]

Field	Description
`rollingUpdate` RollingUpdateDaemonSet	Rolling update config params. Present only if type = "RollingUpdate".
`type` string	Type of daemon set update. Can be "RollingUpdate" or "OnDelete". Default is RollingUpdate.

DeleteOptions v1 meta

Group	Version	Kind
`meta`	`v1`	`DeleteOptions`

DeleteOptions may be provided when deleting an API object.

Appears In:

Eviction [policy/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`dryRun` string array	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds` integer	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential` boolean	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`orphanDependents` boolean	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`preconditions` Preconditions	Must be fulfilled before a deletion is carried out. If not possible, a 409 Conflict status will be returned.
`propagationPolicy` string	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

DeploymentCondition v1 apps

Group	Version	Kind
`apps`	`v1`	`DeploymentCondition`

DeploymentCondition describes the state of a deployment at a certain point.

Appears In:

DeploymentStatus [apps/v1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`lastUpdateTime` Time	The last time this condition was updated.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of deployment condition.

Device v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`Device`

Device represents one individual hardware instance that can be selected based on its attributes. Besides the name, exactly one field must be set.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceSliceSpec [resource/v1beta1]

Field	Description
`basic` BasicDevice	Basic defines one device instance.
`name` string	Name is unique identifier among all devices managed by the driver in the pool. It must be a DNS label.

DeviceAllocationConfiguration v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceAllocationConfiguration`

DeviceAllocationConfiguration gets embedded in an AllocationResult.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceAllocationResult [resource/v1beta1]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.
`requests` string array	Requests lists the names of requests where the configuration applies. If empty, its applies to all requests.
`source` string	Source records whether the configuration comes from a class and thus is not something that a normal user would have been able to set or from a claim.

DeviceAllocationResult v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceAllocationResult`

DeviceAllocationResult is the result of allocating devices.

Other API versions of this object exist: v1alpha3

Appears In:

AllocationResult [resource/v1beta1]

Field	Description
`config` DeviceAllocationConfiguration array	This field is a combination of all the claim and class configuration parameters. Drivers can distinguish between those based on a flag. This includes configuration parameters for drivers which have no allocated devices in the result because it is up to the drivers which configuration parameters they support. They can silently ignore unknown configuration parameters.
`results` DeviceRequestAllocationResult array	Results lists all allocated devices.

DeviceAttribute v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceAttribute`

DeviceAttribute must have exactly one field set.

Other API versions of this object exist: v1alpha3

Appears In:

BasicDevice [resource/v1beta1]

Field	Description
`bool` boolean	BoolValue is a true/false value.
`int` integer	IntValue is a number.
`string` string	StringValue is a string. Must not be longer than 64 characters.
`version` string	VersionValue is a semantic version according to semver.org spec 2.0.0. Must not be longer than 64 characters.

DeviceCapacity v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceCapacity`

DeviceCapacity describes a quantity associated with a device.

Appears In:

BasicDevice [resource/v1beta1]

Field	Description
`value` Quantity	Value defines how much of a certain device capacity is available.

DeviceClaim v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceClaim`

DeviceClaim defines how to request devices with a ResourceClaim.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceClaimSpec [resource/v1beta1]

Field	Description
`config` DeviceClaimConfiguration array	This field holds configuration for multiple potential drivers which could satisfy requests in this claim. It is ignored while allocating the claim.
`constraints` DeviceConstraint array	These constraints must be satisfied by the set of devices that get allocated for the claim.
`requests` DeviceRequest array	Requests represent individual requests for distinct devices which must all be satisfied. If empty, nothing needs to be allocated.

DeviceClaimConfiguration v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceClaimConfiguration`

DeviceClaimConfiguration is used for configuration parameters in DeviceClaim.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClaim [resource/v1beta1]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.
`requests` string array	Requests lists the names of requests where the configuration applies. If empty, it applies to all requests.

DeviceClassConfiguration v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceClassConfiguration`

DeviceClassConfiguration is used in DeviceClass.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClassSpec [resource/v1beta1]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.

DeviceConstraint v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceConstraint`

DeviceConstraint must have exactly one field set besides Requests.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClaim [resource/v1beta1]

Field Description

matchAttribute
string MatchAttribute requires that all devices in question have this attribute and that its type and value are the same across those devices. For example, if you specified "dra.example.com/numa" (a hypothetical example!), then only devices in the same NUMA node will be chosen. A device which does not have that attribute will not be chosen. All devices should use a value of the same type for this attribute because that is part of its specification, but if one device doesn't, then it also will not be chosen. Must include the domain qualifier.

requests
string array Requests is a list of the one or more requests in this claim which must co-satisfy this constraint. If a request is fulfilled by multiple devices, then all of the devices must satisfy the constraint. If this is not specified, this constraint applies to all requests in this claim.

DeviceRequest v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceRequest`

DeviceRequest is a request for devices required for a claim. This is typically a request for a single resource like a device, but can also ask for several identical devices. A DeviceClassName is currently required. Clients must check that it is indeed set. It's absence indicates that something changed in a way that is not supported by the client yet, in which case it must refuse to handle the request.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClaim [resource/v1beta1]

Field	Description
`adminAccess` boolean	AdminAccess indicates that this is a claim for administrative access to the device(s). Claims with AdminAccess are expected to be used for monitoring or other management services for a device. They ignore all ordinary claims to the device with respect to access modes and any resource allocations. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.
`allocationMode` string	AllocationMode and its related fields define how devices are allocated to satisfy this request. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This request is for all of the matching devices in a pool. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AlloctionMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other requests must specify this field. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.
`count` integer	Count is used only when the count mode is "ExactCount". Must be greater than zero. If AllocationMode is ExactCount and this field is not specified, the default is one.
`deviceClassName` string	DeviceClassName references a specific DeviceClass, which can define additional configuration and selectors to be inherited by this request. A class is required. Which classes are available depends on the cluster. Administrators may use this to restrict which devices may get requested by only installing classes with selectors for permitted devices. If users are free to request anything without restrictions, then administrators can create an empty DeviceClass for users to reference.
`name` string	Name can be used to reference this request in a pod.spec.containers[].resources.claims entry and in a constraint of the claim. Must be a DNS label.
`selectors` DeviceSelector array	Selectors define criteria which must be satisfied by a specific device in order for that device to be considered for this request. All selectors must be satisfied for a device to be considered.

DeviceRequestAllocationResult v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceRequestAllocationResult`

DeviceRequestAllocationResult contains the allocation result for one request.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceAllocationResult [resource/v1beta1]

Field	Description
`adminAccess` boolean	AdminAccess indicates that this device was allocated for administrative access. See the corresponding request field for a definition of mode. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.
`device` string	Device references one device instance via its name in the driver's resource pool. It must be a DNS label.
`driver` string	Driver specifies the name of the DRA driver whose kubelet plugin should be invoked to process the allocation once the claim is needed on a node. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`pool` string	This name together with the driver name and the device name field identify which device was allocated (`<driver name>/<pool name>/<device name>`). Must not be longer than 253 characters and may contain one or more DNS sub-domains separated by slashes.
`request` string	Request is the name of the request in the claim which caused this device to be allocated. Multiple devices may have been allocated per request.

DeviceSelector v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`DeviceSelector`

DeviceSelector must have exactly one field set.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceClassSpec [resource/v1beta1]
DeviceRequest [resource/v1beta1]

Field	Description
`cel` CELDeviceSelector	CEL contains a CEL expression for selecting a device.

DownwardAPIProjection v1 core

Group	Version	Kind
`core`	`v1`	`DownwardAPIProjection`

Represents downward API info for projecting into a projected volume. Note that this is identical to a downwardAPI volume source without the default mode.

Appears In:

VolumeProjection [core/v1]

Field	Description
`items` DownwardAPIVolumeFile array	Items is a list of DownwardAPIVolume file

DownwardAPIVolumeFile v1 core

Group	Version	Kind
`core`	`v1`	`DownwardAPIVolumeFile`

DownwardAPIVolumeFile represents information to create the file containing the pod field

Appears In:

DownwardAPIProjection [core/v1]
DownwardAPIVolumeSource [core/v1]

Field	Description
`fieldRef` ObjectFieldSelector	Required: Selects a field of the pod: only annotations, labels, name, namespace and uid are supported.
`mode` integer	Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
`path` string	Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..'
`resourceFieldRef` ResourceFieldSelector	Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.

DownwardAPIVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`DownwardAPIVolumeSource`

DownwardAPIVolumeSource represents a volume containing downward API info. Downward API volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field Description

defaultMode
integer Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

items
DownwardAPIVolumeFile array Items is a list of downward API volume file

EmptyDirVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`EmptyDirVolumeSource`

Represents an empty directory for a pod. Empty directory volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field Description

medium
string medium represents what type of storage medium should back this directory. The default is "" which means to use the node's default medium. Must be an empty string (default) or Memory. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

sizeLimit
Quantity sizeLimit is the total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

Endpoint v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`Endpoint`

Endpoint represents a single logical "backend" implementing a service.

Appears In:

EndpointSlice [discovery/v1]

Field	Description
`addresses` string array	addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
`conditions` EndpointConditions	conditions contains information about the current status of the endpoint.
`deprecatedTopology` object	deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24). While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
`hints` EndpointHints	hints contains information associated with how an endpoint should be consumed.
`hostname` string	hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
`nodeName` string	nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
`targetRef` ObjectReference	targetRef is a reference to a Kubernetes object that represents this endpoint.
`zone` string	zone is the name of the Zone this endpoint exists in.

EndpointAddress v1 core

Group	Version	Kind
`core`	`v1`	`EndpointAddress`

EndpointAddress is a tuple that describes single IP address.

Appears In:

EndpointSubset [core/v1]

Field	Description
`hostname` string	The Hostname of this endpoint
`ip` string	The IP of this endpoint. May not be loopback (127.0.0.0/8 or ::1), link-local (169.254.0.0/16 or fe80::/10), or link-local multicast (224.0.0.0/24 or ff02::/16).
`nodeName` string	Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node.
`targetRef` ObjectReference	Reference to object providing the endpoint.

EndpointConditions v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`EndpointConditions`

EndpointConditions represents the current condition of an endpoint.

Appears In:

Endpoint [discovery/v1]

Field	Description
`ready` boolean	ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
`serving` boolean	serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
`terminating` boolean	terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

EndpointHints v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`EndpointHints`

EndpointHints provides hints describing how an endpoint should be consumed.

Appears In:

Endpoint [discovery/v1]

Field	Description
`forZones` ForZone array	forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

EndpointPort v1 core

Group	Version	Kind
`core`	`v1`	`EndpointPort`

EndpointPort is a tuple that describes a single port.

Appears In:

EndpointSubset [core/v1]

Field	Description
`appProtocol` string	The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
`name` string	The name of this port. This must match the 'name' field in the corresponding ServicePort. Must be a DNS_LABEL. Optional only if one port is defined.
`port` integer	The port number of the endpoint.
`protocol` string	The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

EndpointSubset v1 core

Group	Version	Kind
`core`	`v1`	`EndpointSubset`

EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given: { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] } The resulting set of endpoints can be viewed as: a: [ 10.10.1.1:8675, 10.10.2.2:8675 ], b: [ 10.10.1.1:309, 10.10.2.2:309 ]

Appears In:

Endpoints [core/v1]

Field	Description
`addresses` EndpointAddress array	IP addresses which offer the related ports that are marked as ready. These endpoints should be considered safe for load balancers and clients to utilize.
`notReadyAddresses` EndpointAddress array	IP addresses which offer the related ports but are not currently marked as ready because they have not yet finished starting, have recently failed a readiness check, or have recently failed a liveness check.
`ports` EndpointPort array	Port numbers available on the related IP addresses.

EnvFromSource v1 core

Group	Version	Kind
`core`	`v1`	`EnvFromSource`

EnvFromSource represents the source of a set of ConfigMaps

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`configMapRef` ConfigMapEnvSource	The ConfigMap to select from
`prefix` string	An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
`secretRef` SecretEnvSource	The Secret to select from

EnvVar v1 core

Group	Version	Kind
`core`	`v1`	`EnvVar`

EnvVar represents an environment variable present in a Container.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`name` string	Name of the environment variable. Must be a C_IDENTIFIER.
`value` string	Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
`valueFrom` EnvVarSource	Source for the environment variable's value. Cannot be used if value is not empty.

EnvVarSource v1 core

Group	Version	Kind
`core`	`v1`	`EnvVarSource`

EnvVarSource represents a source for the value of an EnvVar.

Appears In:

EnvVar [core/v1]

Field	Description
`configMapKeyRef` ConfigMapKeySelector	Selects a key of a ConfigMap.
`fieldRef` ObjectFieldSelector	Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
`resourceFieldRef` ResourceFieldSelector	Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
`secretKeyRef` SecretKeySelector	Selects a key of a secret in the pod's namespace

EphemeralContainer v1 core

Group	Version	Kind
`core`	`v1`	`EphemeralContainer`

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation. To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

Appears In:

PodSpec [core/v1]

Field	Description
`args` string array	Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
`command` string array	Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
`env` EnvVar array patch strategy: merge patch merge key: name	List of environment variables to set in the container. Cannot be updated.
`envFrom` EnvFromSource array	List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
`image` string	Container image name. More info: https://kubernetes.io/docs/concepts/containers/images
`imagePullPolicy` string	Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
`lifecycle` Lifecycle	Lifecycle is not allowed for ephemeral containers.
`livenessProbe` Probe	Probes are not allowed for ephemeral containers.
`name` string	Name of the ephemeral container specified as a DNS_LABEL. This name must be unique among all containers, init containers and ephemeral containers.
`ports` ContainerPort array patch strategy: merge patch merge key: containerPort	Ports are not allowed for ephemeral containers.
`readinessProbe` Probe	Probes are not allowed for ephemeral containers.
`resizePolicy` ContainerResizePolicy array	Resources resize policy for the container.
`resources` ResourceRequirements	Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources already allocated to the pod.
`restartPolicy` string	Restart policy for the container to manage the restart behavior of each container within a pod. This may only be set for init containers. You cannot set this field on ephemeral containers.
`securityContext` SecurityContext	Optional: SecurityContext defines the security options the ephemeral container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
`startupProbe` Probe	Probes are not allowed for ephemeral containers.
`stdin` boolean	Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.
`stdinOnce` boolean	Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
`targetContainerName` string	If set, the name of the container from PodSpec that this ephemeral container targets. The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. If not set then the ephemeral container uses the namespaces configured in the Pod spec. The container runtime must implement support for this feature. If the runtime does not support namespace targeting then the result of setting this field is undefined.
`terminationMessagePath` string	Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
`terminationMessagePolicy` string	Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
`tty` boolean	Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
`volumeDevices` VolumeDevice array patch strategy: merge patch merge key: devicePath	volumeDevices is the list of block devices to be used by the container.
`volumeMounts` VolumeMount array patch strategy: merge patch merge key: mountPath	Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. Cannot be updated.
`workingDir` string	Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.

EphemeralVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`EphemeralVolumeSource`

Represents an ephemeral volume that is handled by a normal storage driver.

Appears In:

Volume [core/v1]

Field Description

volumeClaimTemplate
PersistentVolumeClaimTemplate Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e. the PVC will be deleted together with the pod. The name of the PVC will be `<pod name>-<volume name>` where `<volume name>` is the name from the `PodSpec.Volumes` array entry. Pod validation will reject the pod if the concatenated name is not valid for a PVC (for example, too long). An existing PVC with that name that is not owned by the pod will *not* be used for the pod to avoid using an unrelated volume by mistake. Starting the pod is then blocked until the unrelated PVC is removed. If such a pre-created PVC is meant to be used by the pod, the PVC has to updated with an owner reference to the pod once the pod exists. Normally this should not be necessary, but it may be useful when manually reconstructing a broken cluster. This field is read-only and no changes will be made by Kubernetes to the PVC after it has been created. Required, must not be nil.

EventSeries v1 events.k8s.io

Group	Version	Kind
`events.k8s.io`	`v1`	`EventSeries`

EventSeries contain information on series of events, i.e. thing that was/is happening continuously for some time. How often to update the EventSeries is up to the event reporters. The default event reporter in "k8s.io/client-go/tools/events/event_broadcaster.go" shows how this struct is updated on heartbeats and can guide customized reporter implementations.

Appears In:

Event [events/v1]

Field	Description
`count` integer	count is the number of occurrences in this series up to the last heartbeat time.
`lastObservedTime` MicroTime	lastObservedTime is the time when last Event from the series was seen before last heartbeat.

EventSource v1 core

Group	Version	Kind
`core`	`v1`	`EventSource`

EventSource contains information for an event.

Appears In:

Event [core/v1]
Event [events/v1]

Field	Description
`component` string	Component from which the event is generated.
`host` string	Node name on which the event is generated.

Eviction v1 policy

Group	Version	Kind
`policy`	`v1`	`Eviction`

Eviction evicts a pod from its node subject to certain policies and safety constraints. This is a subresource of Pod. A request to cause such an eviction is created by POSTing to .../pods/<pod name>/evictions.

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`deleteOptions` DeleteOptions	DeleteOptions may be provided
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	ObjectMeta describes the pod that is being evicted.

ExecAction v1 core

Group	Version	Kind
`core`	`v1`	`ExecAction`

ExecAction describes a "run in container" action.

Appears In:

LifecycleHandler [core/v1]
Probe [core/v1]

Field	Description
`command` string array	Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('\|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

ExemptPriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`ExemptPriorityLevelConfiguration`

ExemptPriorityLevelConfiguration describes the configurable aspects of the handling of exempt requests. In the mandatory exempt configuration object the values in the fields here can be modified by authorized users, unlike the rest of the `spec`.

Appears In:

PriorityLevelConfigurationSpec [flowcontrol/v1]

Field Description

lendablePercent
integer `lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. This value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )

nominalConcurrencyShares
integer `nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats nominally reserved for this priority level. This DOES NOT limit the dispatching from this priority level but affects the other priority levels through the borrowing mechanism. The server's concurrency limit (ServerCL) is divided among all the priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of zero.

ExpressionWarning v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ExpressionWarning`

ExpressionWarning is a warning information that targets a specific expression.

Other API versions of this object exist: v1beta1

Appears In:

TypeChecking [admissionregistration/v1]

Field	Description
`fieldRef` string	The path to the field that refers the expression. For example, the reference to the expression of the first item of validations is "spec.validations[0].expression"
`warning` string	The content of type checking information in a human-readable form. Each line of the warning contains the type that the expression is checked against, followed by the type check error from the compiler.

ExternalDocumentation v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`ExternalDocumentation`

ExternalDocumentation allows referencing an external resource for extended documentation.

Appears In:

JSONSchemaProps [apiextensions/v1]

Field	Description
`description` string
`url` string

ExternalMetricSource v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ExternalMetricSource`

ExternalMetricSource indicates how to scale on a metric not associated with any Kubernetes object (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).

Appears In:

MetricSpec [autoscaling/v2]

Field	Description
`metric` MetricIdentifier	metric identifies the target metric by name and selector
`target` MetricTarget	target specifies the target value for the given metric

ExternalMetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ExternalMetricStatus`

ExternalMetricStatus indicates the current value of a global metric not associated with any Kubernetes object.

Appears In:

MetricStatus [autoscaling/v2]

Field	Description
`current` MetricValueStatus	current contains the current value for the given metric
`metric` MetricIdentifier	metric identifies the target metric by name and selector

FCVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`FCVolumeSource`

Represents a Fibre Channel volume. Fibre Channel volumes can only be mounted as read/write once. Fibre Channel volumes support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`lun` integer	lun is Optional: FC target lun number
`readOnly` boolean	readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`targetWWNs` string array	targetWWNs is Optional: FC target worldwide names (WWNs)
`wwids` string array	wwids Optional: FC volume world wide identifiers (wwids) Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.

FieldSelectorAttributes v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`FieldSelectorAttributes`

FieldSelectorAttributes indicates a field limited access. Webhook authors are encouraged to * ensure rawSelector and requirements are not both set * consider the requirements field if set * not try to parse or consider the rawSelector field if set. This is to avoid another CVE-2022-2880 (i.e. getting different systems to agree on how exactly to parse a query is not something we want), see https://www.oxeye.io/resources/golang-parameter-smuggling-attack for more details. For the *SubjectAccessReview endpoints of the kube-apiserver: * If rawSelector is empty and requirements are empty, the request is not limited. * If rawSelector is present and requirements are empty, the rawSelector will be parsed and limited if the parsing succeeds. * If rawSelector is empty and requirements are present, the requirements should be honored * If rawSelector is present and requirements are present, the request is invalid.

Appears In:

ResourceAttributes [authorization/v1]

Field	Description
`rawSelector` string	rawSelector is the serialization of a field selector that would be included in a query parameter. Webhook implementations are encouraged to ignore rawSelector. The kube-apiserver's *SubjectAccessReview will parse the rawSelector as long as the requirements are not present.
`requirements` FieldSelectorRequirement array	requirements is the parsed interpretation of a field selector. All requirements must be met for a resource instance to match the selector. Webhook implementations should handle requirements, but how to handle them is up to the webhook. Since requirements can only limit the request, it is safe to authorize as unlimited request if the requirements are not understood.

FieldSelectorRequirement v1 meta

Group	Version	Kind
`meta`	`v1`	`FieldSelectorRequirement`

FieldSelectorRequirement is a selector that contains values, a key, and an operator that relates the key and values.

Appears In:

FieldSelectorAttributes [authorization/v1]

Field	Description
`key` string	key is the field selector key that the requirement applies to.
`operator` string	operator represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. The list of operators may grow in the future.
`values` string array	values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty.

FieldsV1 v1 meta

Group	Version	Kind
`meta`	`v1`	`FieldsV1`

FieldsV1 stores a set of fields in a data structure like a Trie, in JSON format. Each key is either a '.' representing the field itself, and will always map to an empty set, or a string representing a sub-field or item. The string will follow one of these four formats: 'f:<name>', where <name> is the name of a field in a struct, or key in a map 'v:<value>', where <value> is the exact json formatted value of a list item 'i:<index>', where <index> is position of a item in a list 'k:<keys>', where <keys> is a map of a list item's key fields to their unique values If a key maps to an empty Fields value, the field that key represents is part of the set. The exact format is defined in sigs.k8s.io/structured-merge-diff

Appears In:

ManagedFieldsEntry [meta/v1]

Field	Description

FlexPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`FlexPersistentVolumeSource`

FlexPersistentVolumeSource represents a generic persistent volume resource that is provisioned/attached using an exec based plugin.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`driver` string	driver is the name of the driver to use for this volume.
`fsType` string	fsType is the Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.
`options` object	options is Optional: this field holds extra command options if any.
`readOnly` boolean	readOnly is Optional: defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` SecretReference	secretRef is Optional: SecretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.

FlexVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`FlexVolumeSource`

FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.

Appears In:

Volume [core/v1]

Field	Description
`driver` string	driver is the name of the driver to use for this volume.
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.
`options` object	options is Optional: this field holds extra command options if any.
`readOnly` boolean	readOnly is Optional: defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` LocalObjectReference	secretRef is Optional: secretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.

FlockerVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`FlockerVolumeSource`

Represents a Flocker volume mounted by the Flocker agent. One and only one of datasetName and datasetUUID should be set. Flocker volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`datasetName` string	datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker should be considered as deprecated
`datasetUUID` string	datasetUUID is the UUID of the dataset. This is unique identifier of a Flocker dataset

FlowDistinguisherMethod v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`FlowDistinguisherMethod`

FlowDistinguisherMethod specifies the method of a flow distinguisher.

Appears In:

FlowSchemaSpec [flowcontrol/v1]

Field	Description
`type` string	`type` is the type of flow distinguisher method The supported types are "ByUser" and "ByNamespace". Required.

FlowSchemaCondition v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`FlowSchemaCondition`

FlowSchemaCondition describes conditions for a FlowSchema.

Appears In:

FlowSchemaStatus [flowcontrol/v1]

Field	Description
`lastTransitionTime` Time	`lastTransitionTime` is the last time the condition transitioned from one status to another.
`message` string	`message` is a human-readable message indicating details about last transition.
`reason` string	`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
`status` string	`status` is the status of the condition. Can be True, False, Unknown. Required.
`type` string	`type` is the type of the condition. Required.

ForZone v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`ForZone`

ForZone provides information about which zones should consume this endpoint.

Appears In:

EndpointHints [discovery/v1]

Field	Description
`name` string	name represents the name of the zone.

GCEPersistentDiskVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`GCEPersistentDiskVolumeSource`

Represents a Persistent Disk resource in Google Compute Engine. A GCE PD must exist before mounting to a container. The disk must also be in the same GCE project and zone as the kubelet. A GCE PD can only be mounted as read/write once or read-only many times. GCE PDs support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fsType is filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
`partition` integer	partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
`pdName` string	pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
`readOnly` boolean	readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

GRPCAction v1 core

Group	Version	Kind
`core`	`v1`	`GRPCAction`

GRPCAction specifies an action involving a GRPC service.

Appears In:

Probe [core/v1]

Field	Description
`port` integer	Port number of the gRPC service. Number must be in the range 1 to 65535.
`service` string	Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC.

GitRepoVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`GitRepoVolumeSource`

Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.

Appears In:

Volume [core/v1]

Field	Description
`directory` string	directory is the target directory name. Must not contain or start with '..'. If '.' is supplied, the volume directory will be the git repository. Otherwise, if specified, the volume will contain the git repository in the subdirectory with the given name.
`repository` string	repository is the URL
`revision` string	revision is the commit hash for the specified revision.

GlusterfsPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`GlusterfsPersistentVolumeSource`

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`endpoints` string	endpoints is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
`endpointsNamespace` string	endpointsNamespace is the namespace that contains Glusterfs endpoint. If this field is empty, the EndpointNamespace defaults to the same namespace as the bound PVC. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
`path` string	path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
`readOnly` boolean	readOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

GlusterfsVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`GlusterfsVolumeSource`

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`endpoints` string	endpoints is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
`path` string	path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
`readOnly` boolean	readOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

GroupSubject v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`GroupSubject`

GroupSubject holds detailed information for group-kind subject.

Appears In:

Subject [flowcontrol/v1]

Field	Description
`name` string	name is the user group that matches, or "*" to match all user groups. See https://github.com/kubernetes/apiserver/blob/master/pkg/authentication/user/user.go for some well-known group names. Required.

GroupVersionForDiscovery v1 meta

Group	Version	Kind
`meta`	`v1`	`GroupVersionForDiscovery`

GroupVersion contains the "group/version" and "version" string of a version. It is made a struct to keep extensibility.

Appears In:

APIGroup [meta/v1]

Field	Description
`groupVersion` string	groupVersion specifies the API group and version in the form "group/version"
`version` string	version specifies the version in the form of "version". This is to save the clients the trouble of splitting the GroupVersion.

GroupVersionResource v1alpha1 storagemigration.k8s.io

Group	Version	Kind
`storagemigration.k8s.io`	`v1alpha1`	`GroupVersionResource`

The names of the group, the version, and the resource.

Appears In:

StorageVersionMigrationSpec [storagemigration/v1alpha1]

Field	Description
`group` string	The name of the group.
`resource` string	The name of the resource.
`version` string	The name of the version.

HPAScalingPolicy v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`HPAScalingPolicy`

HPAScalingPolicy is a single policy which must hold true for a specified past interval.

Appears In:

HPAScalingRules [autoscaling/v2]

Field	Description
`periodSeconds` integer	periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
`type` string	type is used to specify the scaling policy.
`value` integer	value contains the amount of change which is permitted by the policy. It must be greater than zero

HPAScalingRules v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`HPAScalingRules`

HPAScalingRules configures the scaling behavior for one direction. These Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen.

Appears In:

HorizontalPodAutoscalerBehavior [autoscaling/v2]

Field	Description
`policies` HPAScalingPolicy array	policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
`selectPolicy` string	selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
`stabilizationWindowSeconds` integer	stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).

HTTPGetAction v1 core

Group	Version	Kind
`core`	`v1`	`HTTPGetAction`

HTTPGetAction describes an action based on HTTP Get requests.

Appears In:

LifecycleHandler [core/v1]
Probe [core/v1]

Field	Description
`host` string	Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
`httpHeaders` HTTPHeader array	Custom headers to set in the request. HTTP allows repeated headers.
`path` string	Path to access on the HTTP server.
`port`	Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
`scheme` string	Scheme to use for connecting to the host. Defaults to HTTP.

HTTPHeader v1 core

Group	Version	Kind
`core`	`v1`	`HTTPHeader`

HTTPHeader describes a custom header to be used in HTTP probes

Appears In:

HTTPGetAction [core/v1]

Field	Description
`name` string	The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
`value` string	The header field value

HTTPIngressPath v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`HTTPIngressPath`

HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.

Appears In:

HTTPIngressRuleValue [networking/v1]

Field	Description
`backend` IngressBackend	backend defines the referenced service endpoint to which the traffic will be forwarded to.
`path` string	path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
`pathType` string	pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the '/' separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz). * ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types.

HTTPIngressRuleValue v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`HTTPIngressRuleValue`

HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: http://<host>/<path>?<searchpart> -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last '/' and before the first '?' or '#'.

Appears In:

IngressRule [networking/v1]

Field	Description
`paths` HTTPIngressPath array	paths is a collection of paths that map requests to backends.

HorizontalPodAutoscalerBehavior v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`HorizontalPodAutoscalerBehavior`

HorizontalPodAutoscalerBehavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively).

Appears In:

HorizontalPodAutoscalerSpec [autoscaling/v2]

Field	Description
`scaleDown` HPAScalingRules	scaleDown is scaling policy for scaling Down. If not set, the default value is to allow to scale down to minReplicas pods, with a 300 second stabilization window (i.e., the highest recommendation for the last 300sec is used).
`scaleUp` HPAScalingRules	scaleUp is scaling policy for scaling Up. If not set, the default value is the higher of: * increase no more than 4 pods per 60 seconds * double the number of pods per 60 seconds No stabilization is used.

HorizontalPodAutoscalerCondition v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`HorizontalPodAutoscalerCondition`

HorizontalPodAutoscalerCondition describes the state of a HorizontalPodAutoscaler at a certain point.

Appears In:

HorizontalPodAutoscalerStatus [autoscaling/v2]

Field	Description
`lastTransitionTime` Time	lastTransitionTime is the last time the condition transitioned from one status to another
`message` string	message is a human-readable explanation containing details about the transition
`reason` string	reason is the reason for the condition's last transition.
`status` string	status is the status of the condition (True, False, Unknown)
`type` string	type describes the current condition

HostAlias v1 core

Group	Version	Kind
`core`	`v1`	`HostAlias`

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod's hosts file.

Appears In:

PodSpec [core/v1]

Field	Description
`hostnames` string array	Hostnames for the above IP address.
`ip` string	IP address of the host file entry.

HostIP v1 core

Group	Version	Kind
`core`	`v1`	`HostIP`

HostIP represents a single IP address allocated to the host.

Appears In:

PodStatus [core/v1]

Field	Description
`ip` string	IP is the IP address assigned to the host

HostPathVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`HostPathVolumeSource`

Represents a host path mapped into a pod. Host path volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`path` string	path of the directory on the host. If the path is a symlink, it will follow the link to the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
`type` string	type for HostPath Volume Defaults to "" More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath

IPBlock v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IPBlock`

IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.

Appears In:

NetworkPolicyPeer [networking/v1]

Field	Description
`cidr` string	cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
`except` string array	except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range

ISCSIPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ISCSIPersistentVolumeSource`

ISCSIPersistentVolumeSource represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`chapAuthDiscovery` boolean	chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication
`chapAuthSession` boolean	chapAuthSession defines whether support iSCSI Session CHAP authentication
`fsType` string	fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
`initiatorName` string	initiatorName is the custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection.
`iqn` string	iqn is Target iSCSI Qualified Name.
`iscsiInterface` string	iscsiInterface is the interface Name that uses an iSCSI transport. Defaults to 'default' (tcp).
`lun` integer	lun is iSCSI Target Lun number.
`portals` string array	portals is the iSCSI Target Portal List. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).
`readOnly` boolean	readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false.
`secretRef` SecretReference	secretRef is the CHAP Secret for iSCSI target and initiator authentication
`targetPortal` string	targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

ISCSIVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ISCSIVolumeSource`

Represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`chapAuthDiscovery` boolean	chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication
`chapAuthSession` boolean	chapAuthSession defines whether support iSCSI Session CHAP authentication
`fsType` string	fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
`initiatorName` string	initiatorName is the custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection.
`iqn` string	iqn is the target iSCSI Qualified Name.
`iscsiInterface` string	iscsiInterface is the interface Name that uses an iSCSI transport. Defaults to 'default' (tcp).
`lun` integer	lun represents iSCSI Target Lun number.
`portals` string array	portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).
`readOnly` boolean	readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false.
`secretRef` LocalObjectReference	secretRef is the CHAP Secret for iSCSI target and initiator authentication
`targetPortal` string	targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

ImageVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ImageVolumeSource`

ImageVolumeSource represents a image volume resource.

Appears In:

Volume [core/v1]

Field Description

pullPolicy
string Policy for pulling OCI objects. Possible values are: Always: the kubelet always attempts to pull the reference. Container creation will fail If the pull fails. Never: the kubelet never pulls the reference and only uses a local image or artifact. Container creation will fail if the reference isn't present. IfNotPresent: the kubelet pulls if the reference isn't already present on disk. Container creation will fail if the reference isn't present and the pull fails. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.

reference
string Required: Image or artifact reference to be used. Behaves in the same way as pod.spec.containers[*].image. Pull secrets will be assembled in the same way as for the container image by looking up node credentials, SA image pull secrets, and pod spec image pull secrets. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.

IngressBackend v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressBackend`

IngressBackend describes all endpoints for a given service and port.

Appears In:

HTTPIngressPath [networking/v1]
IngressSpec [networking/v1]

Field	Description
`resource` TypedLocalObjectReference	resource is an ObjectRef to another Kubernetes resource in the namespace of the Ingress object. If resource is specified, a service.Name and service.Port must not be specified. This is a mutually exclusive setting with "Service".
`service` IngressServiceBackend	service references a service as a backend. This is a mutually exclusive setting with "Resource".

IngressClassParametersReference v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressClassParametersReference`

IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.

Appears In:

IngressClassSpec [networking/v1]

Field	Description
`apiGroup` string	apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
`kind` string	kind is the type of resource being referenced.
`name` string	name is the name of resource being referenced.
`namespace` string	namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
`scope` string	scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".

IngressLoadBalancerIngress v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressLoadBalancerIngress`

IngressLoadBalancerIngress represents the status of a load-balancer ingress point.

Appears In:

IngressLoadBalancerStatus [networking/v1]

Field	Description
`hostname` string	hostname is set for load-balancer ingress points that are DNS based.
`ip` string	ip is set for load-balancer ingress points that are IP based.
`ports` IngressPortStatus array	ports provides information about the ports exposed by this LoadBalancer.

IngressLoadBalancerStatus v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressLoadBalancerStatus`

IngressLoadBalancerStatus represents the status of a load-balancer.

Appears In:

IngressStatus [networking/v1]

Field	Description
`ingress` IngressLoadBalancerIngress array	ingress is a list containing ingress points for the load-balancer.

IngressPortStatus v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressPortStatus`

IngressPortStatus represents the error condition of a service port

Appears In:

IngressLoadBalancerIngress [networking/v1]

Field	Description
`error` string	error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names - cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
`port` integer	port is the port number of the ingress port.
`protocol` string	protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"

IngressRule v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressRule`

IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.

Appears In:

IngressSpec [networking/v1]

Field Description

host
string host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the IP in the Spec of the parent Ingress. 2. The `:` delimiter is not respected because ports are not allowed. Currently the port of an Ingress is implicitly :80 for http and :443 for https. Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue. host can be "precise" which is a domain name without the terminating dot of a network host (e.g. "foo.bar.com") or "wildcard", which is a domain name prefixed with a single wildcard label (e.g. "*.foo.com"). The wildcard character '*' must appear by itself as the first DNS label and matches only a single label. You cannot have a wildcard label by itself (e.g. Host == "*"). Requests will be matched against the Host field in the following way: 1. If host is precise, the request matches this rule if the http host header is equal to Host. 2. If host is a wildcard, then the request matches this rule if the http host header is to equal to the suffix (removing the first label) of the wildcard rule.

http
HTTPIngressRuleValue

IngressServiceBackend v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressServiceBackend`

IngressServiceBackend references a Kubernetes Service as a Backend.

Appears In:

IngressBackend [networking/v1]

Field	Description
`name` string	name is the referenced service. The service must exist in the same namespace as the Ingress object.
`port` ServiceBackendPort	port of the referenced service. A port name or port number is required for a IngressServiceBackend.

IngressTLS v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`IngressTLS`

IngressTLS describes the transport layer security associated with an ingress.

Appears In:

IngressSpec [networking/v1]

Field	Description
`hosts` string array	hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
`secretName` string	secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.

JSON v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`JSON`

JSON represents any valid JSON value. These types are supported: bool, int64, float64, string, []interface{}, map[string]interface{} and nil.

Appears In:

JSONSchemaProps [apiextensions/v1]

Field	Description

JSONPatch v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`JSONPatch`

JSONPatch defines a JSON Patch.

Appears In:

Mutation [admissionregistration/v1alpha1]

Field Description

expression
string expression will be evaluated by CEL to create a [JSON patch](https://jsonpatch.com/). ref: https://github.com/google/cel-spec expression must return an array of JSONPatch values. For example, this CEL expression returns a JSON patch to conditionally modify a value: [ JSONPatch{op: "test", path: "/spec/example", value: "Red"}, JSONPatch{op: "replace", path: "/spec/example", value: "Green"} ] To define an object for the patch value, use Object types. For example: [ JSONPatch{ op: "add", path: "/spec/selector", value: Object.spec.selector{matchLabels: {"environment": "test"}} } ] To use strings containing '/' and '~' as JSONPatch path keys, use "jsonpatch.escapeKey". For example: [ JSONPatch{ op: "add", path: "/metadata/labels/" + jsonpatch.escapeKey("example.com/environment"), value: "test" }, ] CEL expressions have access to the types needed to create JSON patches and objects: - 'JSONPatch' - CEL type of JSON Patch operations. JSONPatch has the fields 'op', 'from', 'path' and 'value'. See [JSON patch](https://jsonpatch.com/) for more details. The 'value' field may be set to any of: string, integer, array, map or object. If set, the 'path' and 'from' fields must be set to a [JSON pointer](https://datatracker.ietf.org/doc/html/rfc6901/) string, where the 'jsonpatch.escapeKey()' CEL function may be used to escape path keys containing '/' and '~'. - 'Object' - CEL type of the resource object. - 'Object.<fieldName>' - CEL type of object field (such as 'Object.spec') - 'Object.<fieldName1>.<fieldName2>...<fieldNameN>` - CEL type of nested field (such as 'Object.spec.containers') CEL expressions have access to the contents of the API request, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. CEL expressions have access to [Kubernetes CEL function libraries](https://kubernetes.io/docs/reference/using-api/cel/#cel-options-language-features-and-libraries) as well as: - 'jsonpatch.escapeKey' - Performs JSONPatch key escaping. '~' and '/' are escaped as '~0' and `~1' respectively). Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Required.

JSONSchemaProps v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`JSONSchemaProps`

JSONSchemaProps is a JSON-Schema following Specification Draft 4 (http://json-schema.org/).

Appears In:

CustomResourceValidation [apiextensions/v1]
JSONSchemaProps [apiextensions/v1]

Field	Description
`$ref` string
`$schema` string
`additionalItems` JSONSchemaPropsOrBool
`additionalProperties` JSONSchemaPropsOrBool
`allOf` JSONSchemaProps array
`anyOf` JSONSchemaProps array
`default` JSON	default is a default value for undefined object fields. Defaulting is a beta feature under the CustomResourceDefaulting feature gate. Defaulting requires spec.preserveUnknownFields to be false.
`definitions` object
`dependencies` object
`description` string
`enum` JSON array
`example` JSON
`exclusiveMaximum` boolean
`exclusiveMinimum` boolean
`externalDocs` ExternalDocumentation
`format` string	format is an OpenAPI v3 format string. Unknown formats are ignored. The following formats are validated: - bsonobjectid: a bson object ID, i.e. a 24 characters hex string - uri: an URI as parsed by Golang net/url.ParseRequestURI - email: an email address as parsed by Golang net/mail.ParseAddress - hostname: a valid representation for an Internet host name, as defined by RFC 1034, section 3.1 [RFC1034]. - ipv4: an IPv4 IP as parsed by Golang net.ParseIP - ipv6: an IPv6 IP as parsed by Golang net.ParseIP - cidr: a CIDR as parsed by Golang net.ParseCIDR - mac: a MAC address as parsed by Golang net.ParseMAC - uuid: an UUID that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?[0-9a-f]{4}-?[0-9a-f]{4}-?[0-9a-f]{12}$ - uuid3: an UUID3 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?3[0-9a-f]{3}-?[0-9a-f]{4}-?[0-9a-f]{12}$ - uuid4: an UUID4 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?4[0-9a-f]{3}-?[89ab][0-9a-f]{3}-?[0-9a-f]{12}$ - uuid5: an UUID5 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?5[0-9a-f]{3}-?[89ab][0-9a-f]{3}-?[0-9a-f]{12}$ - isbn: an ISBN10 or ISBN13 number string like "0321751043" or "978-0321751041" - isbn10: an ISBN10 number string like "0321751043" - isbn13: an ISBN13 number string like "978-0321751041" - creditcard: a credit card number defined by the regex ^(?:4[0-9]{12}(?:[0-9]{3})?\|5[1-5][0-9]{14}\|6(?:011\|5[0-9][0-9])[0-9]{12}\|3[47][0-9]{13}\|3(?:0[0-5]\|[68][0-9])[0-9]{11}\|(?:2131\|1800\|35\\d{3})\\d{11})$ with any non digit characters mixed in - ssn: a U.S. social security number following the regex ^\\d{3}[- ]?\\d{2}[- ]?\\d{4}$ - hexcolor: an hexadecimal color code like "#FFFFFF: following the regex ^#?([0-9a-fA-F]{3}\|[0-9a-fA-F]{6})$ - rgbcolor: an RGB color code like rgb like "rgb(255,255,2559" - byte: base64 encoded binary data - password: any kind of string - date: a date string like "2006-01-02" as defined by full-date in RFC3339 - duration: a duration string like "22 ns" as parsed by Golang time.ParseDuration or compatible with Scala duration format - datetime: a date time string like "2014-12-15T19:30:20.000Z" as defined by date-time in RFC3339.
`id` string
`items` JSONSchemaPropsOrArray
`maxItems` integer
`maxLength` integer
`maxProperties` integer
`maximum` number
`minItems` integer
`minLength` integer
`minProperties` integer
`minimum` number
`multipleOf` number
`not` JSONSchemaProps
`nullable` boolean
`oneOf` JSONSchemaProps array
`pattern` string
`patternProperties` object
`properties` object
`required` string array
`title` string
`type` string
`uniqueItems` boolean
`x-kubernetes-embedded-resource` boolean	x-kubernetes-embedded-resource defines that the value is an embedded Kubernetes runtime.Object, with TypeMeta and ObjectMeta. The type must be object. It is allowed to further restrict the embedded object. kind, apiVersion and metadata are validated automatically. x-kubernetes-preserve-unknown-fields is allowed to be true, but does not have to be if the object is fully specified (up to kind, apiVersion, metadata).
`x-kubernetes-int-or-string` boolean	x-kubernetes-int-or-string specifies that this value is either an integer or a string. If this is true, an empty type is allowed and type as child of anyOf is permitted if following one of the following patterns: 1) anyOf: - type: integer - type: string 2) allOf: - anyOf: - type: integer - type: string - ... zero or more
`x-kubernetes-list-map-keys` string array	x-kubernetes-list-map-keys annotates an array with the x-kubernetes-list-type `map` by specifying the keys used as the index of the map. This tag MUST only be used on lists that have the "x-kubernetes-list-type" extension set to "map". Also, the values specified for this attribute must be a scalar typed field of the child structure (no nesting is supported). The properties specified must either be required or have a default value, to ensure those properties are present for all list items.
`x-kubernetes-list-type` string	x-kubernetes-list-type annotates an array to further describe its topology. This extension must only be used on lists and may have 3 possible values: 1) `atomic`: the list is treated as a single entity, like a scalar. Atomic lists will be entirely replaced when updated. This extension may be used on any type of list (struct, scalar, ...). 2) `set`: Sets are lists that must not have multiple items with the same value. Each value must be a scalar, an object with x-kubernetes-map-type `atomic` or an array with x-kubernetes-list-type `atomic`. 3) `map`: These lists are like maps in that their elements have a non-index key used to identify them. Order is preserved upon merge. The map tag must only be used on a list with elements of type object. Defaults to atomic for arrays.
`x-kubernetes-map-type` string	x-kubernetes-map-type annotates an object to further describe its topology. This extension must only be used when type is object and may have 2 possible values: 1) `granular`: These maps are actual maps (key-value pairs) and each fields are independent from each other (they can each be manipulated by separate actors). This is the default behaviour for all maps. 2) `atomic`: the list is treated as a single entity, like a scalar. Atomic maps will be entirely replaced when updated.
`x-kubernetes-preserve-unknown-fields` boolean	x-kubernetes-preserve-unknown-fields stops the API server decoding step from pruning fields which are not specified in the validation schema. This affects fields recursively, but switches back to normal pruning behaviour if nested properties or additionalProperties are specified in the schema. This can either be true or undefined. False is forbidden.
`x-kubernetes-validations` ValidationRule array patch strategy: merge patch merge key: rule	x-kubernetes-validations describes a list of validation rules written in the CEL expression language.

JSONSchemaPropsOrArray v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`JSONSchemaPropsOrArray`

JSONSchemaPropsOrArray represents a value that can either be a JSONSchemaProps or an array of JSONSchemaProps. Mainly here for serialization purposes.

Appears In:

JSONSchemaProps [apiextensions/v1]

Field	Description

JSONSchemaPropsOrBool v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`JSONSchemaPropsOrBool`

JSONSchemaPropsOrBool represents JSONSchemaProps or a boolean value. Defaults to true for the boolean property.

Appears In:

JSONSchemaProps [apiextensions/v1]

Field	Description

JobCondition v1 batch

Group	Version	Kind
`batch`	`v1`	`JobCondition`

JobCondition describes current state of a job.

Appears In:

JobStatus [batch/v1]

Field	Description
`lastProbeTime` Time	Last time the condition was checked.
`lastTransitionTime` Time	Last time the condition transit from one status to another.
`message` string	Human readable message indicating details about last transition.
`reason` string	(brief) reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of job condition, Complete or Failed.

JobTemplateSpec v1 batch

Group	Version	Kind
`batch`	`v1`	`JobTemplateSpec`

JobTemplateSpec describes the data a Job should have when created from a template

Appears In:

CronJobSpec [batch/v1]

Field	Description
`metadata` ObjectMeta	Standard object's metadata of the jobs created from this template. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` JobSpec	Specification of the desired behavior of the job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

KeyToPath v1 core

Group	Version	Kind
`core`	`v1`	`KeyToPath`

Maps a string key to a path within a volume.

Appears In:

ConfigMapProjection [core/v1]
ConfigMapVolumeSource [core/v1]
SecretProjection [core/v1]
SecretVolumeSource [core/v1]

Field	Description
`key` string	key is the key to project.
`mode` integer	mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
`path` string	path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

LabelSelector v1 meta

Group	Version	Kind
`meta`	`v1`	`LabelSelector`

A label selector is a label query over a set of resources. The result of matchLabels and matchExpressions are ANDed. An empty label selector matches all objects. A null label selector matches no objects.

Field	Description
`matchExpressions` LabelSelectorRequirement array	matchExpressions is a list of label selector requirements. The requirements are ANDed.
`matchLabels` object	matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

LabelSelectorAttributes v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`LabelSelectorAttributes`

LabelSelectorAttributes indicates a label limited access. Webhook authors are encouraged to * ensure rawSelector and requirements are not both set * consider the requirements field if set * not try to parse or consider the rawSelector field if set. This is to avoid another CVE-2022-2880 (i.e. getting different systems to agree on how exactly to parse a query is not something we want), see https://www.oxeye.io/resources/golang-parameter-smuggling-attack for more details. For the *SubjectAccessReview endpoints of the kube-apiserver: * If rawSelector is empty and requirements are empty, the request is not limited. * If rawSelector is present and requirements are empty, the rawSelector will be parsed and limited if the parsing succeeds. * If rawSelector is empty and requirements are present, the requirements should be honored * If rawSelector is present and requirements are present, the request is invalid.

Appears In:

ResourceAttributes [authorization/v1]

Field	Description
`rawSelector` string	rawSelector is the serialization of a field selector that would be included in a query parameter. Webhook implementations are encouraged to ignore rawSelector. The kube-apiserver's *SubjectAccessReview will parse the rawSelector as long as the requirements are not present.
`requirements` LabelSelectorRequirement array	requirements is the parsed interpretation of a label selector. All requirements must be met for a resource instance to match the selector. Webhook implementations should handle requirements, but how to handle them is up to the webhook. Since requirements can only limit the request, it is safe to authorize as unlimited request if the requirements are not understood.

LabelSelectorRequirement v1 meta

Group	Version	Kind
`meta`	`v1`	`LabelSelectorRequirement`

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Appears In:

LabelSelector [meta/v1]
LabelSelectorAttributes [authorization/v1]

Field	Description
`key` string	key is the label key that the selector applies to.
`operator` string	operator represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
`values` string array	values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

Lifecycle v1 core

Group	Version	Kind
`core`	`v1`	`Lifecycle`

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field Description

postStart
LifecycleHandler PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks

preStop
LifecycleHandler PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks

LifecycleHandler v1 core

Group	Version	Kind
`core`	`v1`	`LifecycleHandler`

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Appears In:

Lifecycle [core/v1]

Field	Description
`exec` ExecAction	Exec specifies a command to execute in the container.
`httpGet` HTTPGetAction	HTTPGet specifies an HTTP GET request to perform.
`sleep` SleepAction	Sleep represents a duration that the container should sleep.
`tcpSocket` TCPSocketAction	Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.

LimitRangeItem v1 core

Group	Version	Kind
`core`	`v1`	`LimitRangeItem`

LimitRangeItem defines a min/max usage limit for any resource that matches on kind.

Appears In:

LimitRangeSpec [core/v1]

Field	Description
`default` object	Default resource requirement limit value by resource name if resource limit is omitted.
`defaultRequest` object	DefaultRequest is the default resource requirement request value by resource name if resource request is omitted.
`max` object	Max usage constraints on this kind by resource name.
`maxLimitRequestRatio` object	MaxLimitRequestRatio if specified, the named resource must have a request and limit that are both non-zero where limit divided by request is less than or equal to the enumerated value; this represents the max burst for the named resource.
`min` object	Min usage constraints on this kind by resource name.
`type` string	Type of resource that this limit applies to.

LimitResponse v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`LimitResponse`

LimitResponse defines how to handle requests that can not be executed right now.

Appears In:

LimitedPriorityLevelConfiguration [flowcontrol/v1]

Field	Description
`queuing` QueuingConfiguration	`queuing` holds the configuration parameters for queuing. This field may be non-empty only if `type` is `"Queue"`.
`type` string	`type` is "Queue" or "Reject". "Queue" means that requests that can not be executed upon arrival are held in a queue until they can be executed or a queuing limit is reached. "Reject" means that requests that can not be executed upon arrival are rejected. Required.

LimitedPriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`LimitedPriorityLevelConfiguration`

LimitedPriorityLevelConfiguration specifies how to handle requests that are subject to limits. It addresses two issues: - How are requests for this priority level limited? - What should be done with requests that exceed the limit?

Appears In:

PriorityLevelConfigurationSpec [flowcontrol/v1]

Field	Description
`borrowingLimitPercent` integer	`borrowingLimitPercent`, if present, configures a limit on how many seats this priority level can borrow from other priority levels. The limit is known as this level's BorrowingConcurrencyLimit (BorrowingCL) and is a limit on the total number of seats that this level may borrow at any one time. This field holds the ratio of that limit to the level's nominal concurrency limit. When this field is non-nil, it must hold a non-negative integer and the limit is calculated as follows. BorrowingCL(i) = round( NominalCL(i) * borrowingLimitPercent(i)/100.0 ) The value of this field can be more than 100, implying that this priority level can borrow a number of seats that is greater than its own nominal concurrency limit (NominalCL). When this field is left `nil`, the limit is effectively infinite.
`lendablePercent` integer	`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. The value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )
`limitResponse` LimitResponse	`limitResponse` indicates what to do with requests that can not be executed right now
`nominalConcurrencyShares` integer	`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server's concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. If not specified, this field defaults to a value of 30. Setting this field to zero supports the construction of a "jail" for this priority level that is used to hold some request(s)

LinuxContainerUser v1 core

Group	Version	Kind
`core`	`v1`	`LinuxContainerUser`

LinuxContainerUser represents user identity information in Linux containers

Appears In:

ContainerUser [core/v1]

Field	Description
`gid` integer	GID is the primary gid initially attached to the first process in the container
`supplementalGroups` integer array	SupplementalGroups are the supplemental groups initially attached to the first process in the container
`uid` integer	UID is the primary uid initially attached to the first process in the container

ListMeta v1 meta

Group	Version	Kind
`meta`	`v1`	`ListMeta`

ListMeta describes metadata that synthetic resources must have, including lists and various status objects. A resource may have only one of {ObjectMeta, ListMeta}.

Appears In:

APIServiceList [apiregistration/v1]
CSIDriverList [storage/v1]
CSINodeList [storage/v1]
CSIStorageCapacityList [storage/v1]
CertificateSigningRequestList [certificates/v1]
ClusterRoleBindingList [rbac/v1]
ClusterRoleList [rbac/v1]
ClusterTrustBundleList [certificates/v1alpha1]
ComponentStatusList [core/v1]
ConfigMapList [core/v1]
ControllerRevisionList [apps/v1]
CronJobList [batch/v1]
CustomResourceDefinitionList [apiextensions/v1]
DaemonSetList [apps/v1]
DeploymentList [apps/v1]
DeviceClassList [resource/v1beta1]
DeviceClassList [resource/v1alpha3]
EndpointSliceList [discovery/v1]
EndpointsList [core/v1]
EventList [core/v1]
EventList [events/v1]
FlowSchemaList [flowcontrol/v1]
HorizontalPodAutoscalerList [autoscaling/v2]
HorizontalPodAutoscalerList [autoscaling/v1]
IPAddressList [networking/v1beta1]
IngressClassList [networking/v1]
IngressList [networking/v1]
JobList [batch/v1]
LeaseCandidateList [coordination/v1alpha2]
LeaseList [coordination/v1]
LimitRangeList [core/v1]
MutatingAdmissionPolicyBindingList [admissionregistration/v1alpha1]
MutatingAdmissionPolicyList [admissionregistration/v1alpha1]
MutatingWebhookConfigurationList [admissionregistration/v1]
NamespaceList [core/v1]
NetworkPolicyList [networking/v1]
NodeList [core/v1]
PersistentVolumeClaimList [core/v1]
PersistentVolumeList [core/v1]
PodDisruptionBudgetList [policy/v1]
PodList [core/v1]
PodTemplateList [core/v1]
PriorityClassList [scheduling/v1]
PriorityLevelConfigurationList [flowcontrol/v1]
ReplicaSetList [apps/v1]
ReplicationControllerList [core/v1]
ResourceClaimList [resource/v1beta1]
ResourceClaimList [resource/v1alpha3]
ResourceClaimTemplateList [resource/v1beta1]
ResourceClaimTemplateList [resource/v1alpha3]
ResourceQuotaList [core/v1]
ResourceSliceList [resource/v1beta1]
ResourceSliceList [resource/v1alpha3]
RoleBindingList [rbac/v1]
RoleList [rbac/v1]
RuntimeClassList [node/v1]
SecretList [core/v1]
ServiceAccountList [core/v1]
ServiceCIDRList [networking/v1beta1]
ServiceList [core/v1]
StatefulSetList [apps/v1]
Status [meta/v1]
StorageClassList [storage/v1]
StorageVersionList [apiserverinternal/v1alpha1]
StorageVersionMigrationList [storagemigration/v1alpha1]
ValidatingAdmissionPolicyBindingList [admissionregistration/v1]
ValidatingAdmissionPolicyBindingList [admissionregistration/v1beta1]
ValidatingAdmissionPolicyList [admissionregistration/v1]
ValidatingAdmissionPolicyList [admissionregistration/v1beta1]
ValidatingWebhookConfigurationList [admissionregistration/v1]
VolumeAttachmentList [storage/v1]
VolumeAttributesClassList [storage/v1beta1]
VolumeAttributesClassList [storage/v1alpha1]

Field	Description
`continue` string	continue may be set if the user set a limit on the number of items returned, and indicates that the server has more data available. The value is opaque and may be used to issue another request to the endpoint that served this list to retrieve the next set of available objects. Continuing a consistent list may not be possible if the server configuration has changed or more than a few minutes have passed. The resourceVersion field returned when using this continue value will be identical to the value in the first response, unless you have received this token from an error message.
`remainingItemCount` integer	remainingItemCount is the number of subsequent items in the list which are not included in this list response. If the list request contained label or field selectors, then the number of remaining items is unknown and the field will be left unset and omitted during serialization. If the list is complete (either because it is not chunking or because this is the last chunk), then there are no more remaining items and this field will be left unset and omitted during serialization. Servers older than v1.15 do not set this field. The intended use of the remainingItemCount is estimating the size of a collection. Clients should not rely on the remainingItemCount to be set or to be exact.
`resourceVersion` string	String that identifies the server's internal version of this object that can be used by clients to determine when objects have changed. Value must be treated as opaque by clients and passed unmodified back to the server. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
`selfLink` string	Deprecated: selfLink is a legacy read-only field that is no longer populated by the system.

LoadBalancerIngress v1 core

Group	Version	Kind
`core`	`v1`	`LoadBalancerIngress`

LoadBalancerIngress represents the status of a load-balancer ingress point: traffic intended for the service should be sent to an ingress point.

Appears In:

LoadBalancerStatus [core/v1]

Field	Description
`hostname` string	Hostname is set for load-balancer ingress points that are DNS based (typically AWS load-balancers)
`ip` string	IP is set for load-balancer ingress points that are IP based (typically GCE or OpenStack load-balancers)
`ipMode` string	IPMode specifies how the load-balancer IP behaves, and may only be specified when the ip field is specified. Setting this to "VIP" indicates that traffic is delivered to the node with the destination set to the load-balancer's IP and port. Setting this to "Proxy" indicates that traffic is delivered to the node or pod with the destination set to the node's IP and node port or the pod's IP and port. Service implementations may use this information to adjust traffic routing.
`ports` PortStatus array	Ports is a list of records of service ports If used, every port defined in the service should have an entry in it

LoadBalancerStatus v1 core

Group	Version	Kind
`core`	`v1`	`LoadBalancerStatus`

LoadBalancerStatus represents the status of a load-balancer.

Appears In:

ServiceStatus [core/v1]

Field	Description
`ingress` LoadBalancerIngress array	Ingress is a list containing ingress points for the load-balancer. Traffic intended for the service should be sent to these ingress points.

LocalObjectReference v1 core

Group	Version	Kind
`core`	`v1`	`LocalObjectReference`

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Appears In:

CSIVolumeSource [core/v1]
CephFSVolumeSource [core/v1]
CinderVolumeSource [core/v1]
FlexVolumeSource [core/v1]
ISCSIVolumeSource [core/v1]
PodSpec [core/v1]
RBDVolumeSource [core/v1]
ScaleIOVolumeSource [core/v1]
ServiceAccount [core/v1]
StorageOSVolumeSource [core/v1]

Field	Description
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

LocalVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`LocalVolumeSource`

Local represents directly-attached storage with node affinity

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. It applies only when the Path is a block device. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default value is to auto-select a filesystem if unspecified.
`path` string	path of the full path to the volume on the node. It can be either a directory or block device (disk, partition, ...).

ManagedFieldsEntry v1 meta

Group	Version	Kind
`meta`	`v1`	`ManagedFieldsEntry`

ManagedFieldsEntry is a workflow-id, a FieldSet and the group version of the resource that the fieldset applies to.

Appears In:

ObjectMeta [meta/v1]

Field	Description
`apiVersion` string	APIVersion defines the version of this resource that this field set applies to. The format is "group/version" just like the top-level APIVersion field. It is necessary to track the version of a field set because it cannot be automatically converted.
`fieldsType` string	FieldsType is the discriminator for the different fields format and version. There is currently only one possible value: "FieldsV1"
`fieldsV1` FieldsV1	FieldsV1 holds the first JSON version format as described in the "FieldsV1" type.
`manager` string	Manager is an identifier of the workflow managing these fields.
`operation` string	Operation is the type of operation which lead to this ManagedFieldsEntry being created. The only valid values for this field are 'Apply' and 'Update'.
`subresource` string	Subresource is the name of the subresource used to update that object, or empty string if the object was updated through the main resource. The value of this field is used to distinguish between managers, even if they share the same name. For example, a status update will be distinct from a regular update using the same manager name. Note that the APIVersion field is not related to the Subresource field and it always corresponds to the version of the main resource.
`time` Time	Time is the timestamp of when the ManagedFields entry was added. The timestamp will also be updated if a field is added, the manager changes any of the owned fields value or removes a field. The timestamp does not update when a field is removed from the entry because another manager took it over.

MatchCondition v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`MatchCondition`

MatchCondition represents a condition which must by fulfilled for a request to be sent to a webhook.

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

MutatingWebhook [admissionregistration/v1]
ValidatingAdmissionPolicySpec [admissionregistration/v1]
ValidatingWebhook [admissionregistration/v1]

Field Description

expression
string Expression represents the expression which will be evaluated by CEL. Must evaluate to bool. CEL expressions have access to the contents of the AdmissionRequest and Authorizer, organized into CEL variables: 'object' - The object from the incoming request. The value is null for DELETE requests. 'oldObject' - The existing object. The value is null for CREATE requests. 'request' - Attributes of the admission request(/pkg/apis/admission/types.go#AdmissionRequest). 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/ Required.

name
string Name is an identifier for this match condition, used for strategic merging of MatchConditions, as well as providing an identifier for logging purposes. A good name should be descriptive of the associated expression. Name must be a qualified name consisting of alphanumeric characters, '-', '_' or '.', and must start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc', regex used for validation is '([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]') with an optional DNS subdomain prefix and '/' (e.g. 'example.com/MyName') Required.

MatchResources v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`MatchResources`

MatchResources decides whether to run the admission control policy on an object based on whether it meets the match criteria. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

ValidatingAdmissionPolicyBindingSpec [admissionregistration/v1]
ValidatingAdmissionPolicySpec [admissionregistration/v1]

Field	Description
`excludeResourceRules` NamedRuleWithOperations array	ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
`matchPolicy` string	matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
`namespaceSelector` LabelSelector	NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
`objectSelector` LabelSelector	ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
`resourceRules` NamedRuleWithOperations array	ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

MetricIdentifier v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`MetricIdentifier`

MetricIdentifier defines the name and optionally selector for a metric

Appears In:

ExternalMetricSource [autoscaling/v2]
ExternalMetricStatus [autoscaling/v2]
ObjectMetricSource [autoscaling/v2]
ObjectMetricStatus [autoscaling/v2]
PodsMetricSource [autoscaling/v2]
PodsMetricStatus [autoscaling/v2]

Field	Description
`name` string	name is the name of the given metric
`selector` LabelSelector	selector is the string-encoded form of a standard kubernetes label selector for the given metric When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping. When unset, just the metricName will be used to gather metrics.

MetricSpec v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`MetricSpec`

MetricSpec specifies how to scale based on a single metric (only `type` and one other matching field should be set at once).

Appears In:

HorizontalPodAutoscalerSpec [autoscaling/v2]

Field	Description
`containerResource` ContainerResourceMetricSource	containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
`external` ExternalMetricSource	external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
`object` ObjectMetricSource	object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
`pods` PodsMetricSource	pods refers to a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.
`resource` ResourceMetricSource	resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
`type` string	type is the type of metric source. It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.

MetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`MetricStatus`

MetricStatus describes the last-read state of a single metric.

Appears In:

HorizontalPodAutoscalerStatus [autoscaling/v2]

Field	Description
`containerResource` ContainerResourceMetricStatus	container resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
`external` ExternalMetricStatus	external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
`object` ObjectMetricStatus	object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
`pods` PodsMetricStatus	pods refers to a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.
`resource` ResourceMetricStatus	resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
`type` string	type is the type of metric source. It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object.

MetricTarget v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`MetricTarget`

MetricTarget defines the target value, average value, or average utilization of a specific metric

Appears In:

ContainerResourceMetricSource [autoscaling/v2]
ExternalMetricSource [autoscaling/v2]
ObjectMetricSource [autoscaling/v2]
PodsMetricSource [autoscaling/v2]
ResourceMetricSource [autoscaling/v2]

Field	Description
`averageUtilization` integer	averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
`averageValue` Quantity	averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
`type` string	type represents whether the metric type is Utilization, Value, or AverageValue
`value` Quantity	value is the target value of the metric (as a quantity).

MetricValueStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`MetricValueStatus`

MetricValueStatus holds the current value for a metric

Appears In:

ContainerResourceMetricStatus [autoscaling/v2]
ExternalMetricStatus [autoscaling/v2]
ObjectMetricStatus [autoscaling/v2]
PodsMetricStatus [autoscaling/v2]
ResourceMetricStatus [autoscaling/v2]

Field	Description
`averageUtilization` integer	currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
`averageValue` Quantity	averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
`value` Quantity	value is the current value of the metric (as a quantity).

MicroTime v1 meta

Group	Version	Kind
`meta`	`v1`	`MicroTime`

MicroTime is version of Time with microsecond level precision.

Appears In:

Event [core/v1]
Event [events/v1]
EventSeries [core/v1]
EventSeries [events/v1]
LeaseCandidateSpec [coordination/v1alpha2]
LeaseSpec [coordination/v1]

Field	Description

MigrationCondition v1alpha1 storagemigration.k8s.io

Group	Version	Kind
`storagemigration.k8s.io`	`v1alpha1`	`MigrationCondition`

Describes the state of a migration at a certain point.

Appears In:

StorageVersionMigrationStatus [storagemigration/v1alpha1]

Field	Description
`lastUpdateTime` Time	The last time this condition was updated.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of the condition.

ModifyVolumeStatus v1 core

Group	Version	Kind
`core`	`v1`	`ModifyVolumeStatus`

ModifyVolumeStatus represents the status object of ControllerModifyVolume operation

Appears In:

PersistentVolumeClaimStatus [core/v1]

Field Description

status
string status is the status of the ControllerModifyVolume operation. It can be in any of following states: - Pending Pending indicates that the PersistentVolumeClaim cannot be modified due to unmet requirements, such as the specified VolumeAttributesClass not existing. - InProgress InProgress indicates that the volume is being modified. - Infeasible Infeasible indicates that the request has been rejected as invalid by the CSI driver. To resolve the error, a valid VolumeAttributesClass needs to be specified. Note: New statuses can be added in the future. Consumers should check for unknown statuses and fail appropriately.

targetVolumeAttributesClassName
string targetVolumeAttributesClassName is the name of the VolumeAttributesClass the PVC currently being reconciled

MutatingWebhook v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`MutatingWebhook`

MutatingWebhook describes an admission webhook and the resources and operations it applies to.

Appears In:

MutatingWebhookConfiguration [admissionregistration/v1]

Field	Description
`admissionReviewVersions` string array	AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
`clientConfig` WebhookClientConfig	ClientConfig defines how to communicate with the hook. Required
`failurePolicy` string	FailurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
`matchConditions` MatchCondition array patch strategy: merge patch merge key: name	MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the webhook is skipped. 2. If ALL matchConditions evaluate to TRUE, the webhook is called. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
`matchPolicy` string	matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Equivalent"
`name` string	The name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where "imagepolicy" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
`namespaceSelector` LabelSelector	NamespaceSelector decides whether to run the webhook on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the webhook. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the webhook on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
`objectSelector` LabelSelector	ObjectSelector decides whether to run the webhook based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the webhook, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
`reinvocationPolicy` string	reinvocationPolicy indicates whether this webhook should be called multiple times as part of a single admission evaluation. Allowed values are "Never" and "IfNeeded". Never: the webhook will not be called more than once in a single admission evaluation. IfNeeded: the webhook will be called at least one additional time as part of the admission evaluation if the object being admitted is modified by other admission plugins after the initial webhook call. Webhooks that specify this option must be idempotent, able to process objects they previously admitted. Note: * the number of additional invocations is not guaranteed to be exactly one. * if additional invocations result in further modifications to the object, webhooks are not guaranteed to be invoked again. * webhooks that use this option may be reordered to minimize the number of additional invocations. * to validate an object after all mutations are guaranteed complete, use a validating admission webhook instead. Defaults to "Never".
`rules` RuleWithOperations array	Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
`sideEffects` string	SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
`timeoutSeconds` integer	TimeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.

Mutation v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`Mutation`

Mutation specifies the CEL expression which is used to apply the Mutation.

Appears In:

MutatingAdmissionPolicySpec [admissionregistration/v1alpha1]

Field	Description
`applyConfiguration` ApplyConfiguration	applyConfiguration defines the desired configuration values of an object. The configuration is applied to the admission object using [structured merge diff](https://github.com/kubernetes-sigs/structured-merge-diff). A CEL expression is used to create apply configuration.
`jsonPatch` JSONPatch	jsonPatch defines a [JSON patch](https://jsonpatch.com/) operation to perform a mutation to the object. A CEL expression is used to create the JSON patch.
`patchType` string	patchType indicates the patch strategy used. Allowed values are "ApplyConfiguration" and "JSONPatch". Required.

NFSVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`NFSVolumeSource`

Represents an NFS mount that lasts the lifetime of a pod. NFS volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`path` string	path that is exported by the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
`readOnly` boolean	readOnly here will force the NFS export to be mounted with read-only permissions. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
`server` string	server is the hostname or IP address of the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

NamedRuleWithOperations v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`NamedRuleWithOperations`

NamedRuleWithOperations is a tuple of Operations and Resources with ResourceNames.

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

MatchResources [admissionregistration/v1]

Field	Description
`apiGroups` string array	APIGroups is the API groups the resources belong to. '' is all groups. If '' is present, the length of the slice must be one. Required.
`apiVersions` string array	APIVersions is the API versions the resources belong to. '' is all versions. If '' is present, the length of the slice must be one. Required.
`operations` string array	Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
`resourceNames` string array	ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
`resources` string array	Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '' means all resources, but not subresources. 'pods/' means all subresources of pods. '/scale' means all scale subresources. '/*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
`scope` string	scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NamespaceCondition v1 core

Group	Version	Kind
`core`	`v1`	`NamespaceCondition`

NamespaceCondition contains details about state of namespace.

Appears In:

NamespaceStatus [core/v1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	Human-readable message indicating details about last transition.
`reason` string	Unique, one-word, CamelCase reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of namespace controller condition.

NetworkDeviceData v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`NetworkDeviceData`

NetworkDeviceData provides network-related details for the allocated device. This information may be filled by drivers or other components to configure or identify the device within a network context.

Other API versions of this object exist: v1alpha3

Appears In:

AllocatedDeviceStatus [resource/v1beta1]

Field	Description
`hardwareAddress` string	HardwareAddress represents the hardware address (e.g. MAC Address) of the device's network interface. Must not be longer than 128 characters.
`interfaceName` string	InterfaceName specifies the name of the network interface associated with the allocated device. This might be the name of a physical or virtual network interface being configured in the pod. Must not be longer than 256 characters.
`ips` string array	IPs lists the network addresses assigned to the device's network interface. This can include both IPv4 and IPv6 addresses. The IPs are in the CIDR notation, which includes both the address and the associated subnet mask. e.g.: "192.0.2.5/24" for IPv4 and "2001:db8::5/64" for IPv6.

NetworkPolicyEgressRule v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`NetworkPolicyEgressRule`

NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to. This type is beta-level in 1.8

Appears In:

NetworkPolicySpec [networking/v1]

Field	Description
`ports` NetworkPolicyPort array	ports is a list of destination ports for outgoing traffic. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.
`to` NetworkPolicyPeer array	to is a list of destinations for outgoing traffic of pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all destinations (traffic not restricted by destination). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the to list.

NetworkPolicyIngressRule v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`NetworkPolicyIngressRule`

NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.

Appears In:

NetworkPolicySpec [networking/v1]

Field	Description
`from` NetworkPolicyPeer array	from is a list of sources which should be able to access the pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all sources (traffic not restricted by source). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the from list.
`ports` NetworkPolicyPort array	ports is a list of ports which should be made accessible on the pods selected for this rule. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.

NetworkPolicyPeer v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`NetworkPolicyPeer`

NetworkPolicyPeer describes a peer to allow traffic to/from. Only certain combinations of fields are allowed

Appears In:

NetworkPolicyEgressRule [networking/v1]
NetworkPolicyIngressRule [networking/v1]

Field	Description
`ipBlock` IPBlock	ipBlock defines policy on a particular IPBlock. If this field is set then neither of the other fields can be.
`namespaceSelector` LabelSelector	namespaceSelector selects namespaces using cluster-scoped labels. This field follows standard label selector semantics; if present but empty, it selects all namespaces. If podSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the namespaces selected by namespaceSelector. Otherwise it selects all pods in the namespaces selected by namespaceSelector.
`podSelector` LabelSelector	podSelector is a label selector which selects pods. This field follows standard label selector semantics; if present but empty, it selects all pods. If namespaceSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects the pods matching podSelector in the policy's own namespace.

NetworkPolicyPort v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`NetworkPolicyPort`

NetworkPolicyPort describes a port to allow traffic on

Appears In:

NetworkPolicyEgressRule [networking/v1]
NetworkPolicyIngressRule [networking/v1]

Field	Description
`endPort` integer	endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
`port`	port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
`protocol` string	protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

NodeAddress v1 core

Group	Version	Kind
`core`	`v1`	`NodeAddress`

NodeAddress contains information for the node's address.

Appears In:

NodeStatus [core/v1]

Field	Description
`address` string	The node address.
`type` string	Node address type, one of Hostname, ExternalIP or InternalIP.

NodeAffinity v1 core

Group	Version	Kind
`core`	`v1`	`NodeAffinity`

Node affinity is a group of node affinity scheduling rules.

Appears In:

Affinity [core/v1]

Field Description

preferredDuringSchedulingIgnoredDuringExecution
PreferredSchedulingTerm array The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

requiredDuringSchedulingIgnoredDuringExecution
NodeSelector If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

NodeCondition v1 core

Group	Version	Kind
`core`	`v1`	`NodeCondition`

NodeCondition contains condition information for a node.

Appears In:

NodeStatus [core/v1]

Field	Description
`lastHeartbeatTime` Time	Last time we got an update on a given condition.
`lastTransitionTime` Time	Last time the condition transit from one status to another.
`message` string	Human readable message indicating details about last transition.
`reason` string	(brief) reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of node condition.

NodeConfigSource v1 core

Group	Version	Kind
`core`	`v1`	`NodeConfigSource`

NodeConfigSource specifies a source of node configuration. Exactly one subfield (excluding metadata) must be non-nil. This API is deprecated since 1.22

Appears In:

NodeConfigStatus [core/v1]
NodeSpec [core/v1]

Field	Description
`configMap` ConfigMapNodeConfigSource	ConfigMap is a reference to a Node's ConfigMap

NodeConfigStatus v1 core

Group	Version	Kind
`core`	`v1`	`NodeConfigStatus`

NodeConfigStatus describes the status of the config assigned by Node.Spec.ConfigSource.

Appears In:

NodeStatus [core/v1]

Field	Description
`active` NodeConfigSource	Active reports the checkpointed config the node is actively using. Active will represent either the current version of the Assigned config, or the current LastKnownGood config, depending on whether attempting to use the Assigned config results in an error.
`assigned` NodeConfigSource	Assigned reports the checkpointed config the node will try to use. When Node.Spec.ConfigSource is updated, the node checkpoints the associated config payload to local disk, along with a record indicating intended config. The node refers to this record to choose its config checkpoint, and reports this record in Assigned. Assigned only updates in the status after the record has been checkpointed to disk. When the Kubelet is restarted, it tries to make the Assigned config the Active config by loading and validating the checkpointed payload identified by Assigned.
`error` string	Error describes any problems reconciling the Spec.ConfigSource to the Active config. Errors may occur, for example, attempting to checkpoint Spec.ConfigSource to the local Assigned record, attempting to checkpoint the payload associated with Spec.ConfigSource, attempting to load or validate the Assigned config, etc. Errors may occur at different points while syncing config. Earlier errors (e.g. download or checkpointing errors) will not result in a rollback to LastKnownGood, and may resolve across Kubelet retries. Later errors (e.g. loading or validating a checkpointed config) will result in a rollback to LastKnownGood. In the latter case, it is usually possible to resolve the error by fixing the config assigned in Spec.ConfigSource. You can find additional information for debugging by searching the error message in the Kubelet log. Error is a human-readable description of the error state; machines can check whether or not Error is empty, but should not rely on the stability of the Error text across Kubelet versions.
`lastKnownGood` NodeConfigSource	LastKnownGood reports the checkpointed config the node will fall back to when it encounters an error attempting to use the Assigned config. The Assigned config becomes the LastKnownGood config when the node determines that the Assigned config is stable and correct. This is currently implemented as a 10-minute soak period starting when the local record of Assigned config is updated. If the Assigned config is Active at the end of this period, it becomes the LastKnownGood. Note that if Spec.ConfigSource is reset to nil (use local defaults), the LastKnownGood is also immediately reset to nil, because the local default config is always assumed good. You should not make assumptions about the node's method of determining config stability and correctness, as this may change or become configurable in the future.

NodeDaemonEndpoints v1 core

Group	Version	Kind
`core`	`v1`	`NodeDaemonEndpoints`

NodeDaemonEndpoints lists ports opened by daemons running on the Node.

Appears In:

NodeStatus [core/v1]

Field	Description
`kubeletEndpoint` DaemonEndpoint	Endpoint on which Kubelet is listening.

NodeFeatures v1 core

Group	Version	Kind
`core`	`v1`	`NodeFeatures`

NodeFeatures describes the set of features implemented by the CRI implementation. The features contained in the NodeFeatures should depend only on the cri implementation independent of runtime handlers.

Appears In:

NodeStatus [core/v1]

Field	Description
`supplementalGroupsPolicy` boolean	SupplementalGroupsPolicy is set to true if the runtime supports SupplementalGroupsPolicy and ContainerUser.

NodeRuntimeHandler v1 core

Group	Version	Kind
`core`	`v1`	`NodeRuntimeHandler`

NodeRuntimeHandler is a set of runtime handler information.

Appears In:

NodeStatus [core/v1]

Field	Description
`features` NodeRuntimeHandlerFeatures	Supported features.
`name` string	Runtime handler name. Empty for the default runtime handler.

NodeRuntimeHandlerFeatures v1 core

Group	Version	Kind
`core`	`v1`	`NodeRuntimeHandlerFeatures`

NodeRuntimeHandlerFeatures is a set of features implemented by the runtime handler.

Appears In:

NodeRuntimeHandler [core/v1]

Field	Description
`recursiveReadOnlyMounts` boolean	RecursiveReadOnlyMounts is set to true if the runtime handler supports RecursiveReadOnlyMounts.
`userNamespaces` boolean	UserNamespaces is set to true if the runtime handler supports UserNamespaces, including for volumes.

NodeSelector v1 core

Group	Version	Kind
`core`	`v1`	`NodeSelector`

A node selector represents the union of the results of one or more label queries over a set of nodes; that is, it represents the OR of the selectors represented by the node selector terms.

Appears In:

AllocationResult [resource/v1beta1]
AllocationResult [resource/v1alpha3]
NodeAffinity [core/v1]
ResourceSliceSpec [resource/v1beta1]
ResourceSliceSpec [resource/v1alpha3]
VolumeNodeAffinity [core/v1]

Field	Description
`nodeSelectorTerms` NodeSelectorTerm array	Required. A list of node selector terms. The terms are ORed.

NodeSelectorRequirement v1 core

Group	Version	Kind
`core`	`v1`	`NodeSelectorRequirement`

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Appears In:

NodeSelectorTerm [core/v1]

Field	Description
`key` string	The label key that the selector applies to.
`operator` string	Represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
`values` string array	An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

NodeSelectorTerm v1 core

Group	Version	Kind
`core`	`v1`	`NodeSelectorTerm`

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

Appears In:

NodeSelector [core/v1]
PreferredSchedulingTerm [core/v1]

Field	Description
`matchExpressions` NodeSelectorRequirement array	A list of node selector requirements by node's labels.
`matchFields` NodeSelectorRequirement array	A list of node selector requirements by node's fields.

NodeSystemInfo v1 core

Group	Version	Kind
`core`	`v1`	`NodeSystemInfo`

NodeSystemInfo is a set of ids/uuids to uniquely identify the node.

Appears In:

NodeStatus [core/v1]

Field	Description
`architecture` string	The Architecture reported by the node
`bootID` string	Boot ID reported by the node.
`containerRuntimeVersion` string	ContainerRuntime Version reported by the node through runtime remote API (e.g. containerd://1.4.2).
`kernelVersion` string	Kernel Version reported by the node from 'uname -r' (e.g. 3.16.0-0.bpo.4-amd64).
`kubeProxyVersion` string	Deprecated: KubeProxy Version reported by the node.
`kubeletVersion` string	Kubelet Version reported by the node.
`machineID` string	MachineID reported by the node. For unique machine identification in the cluster this field is preferred. Learn more from man(5) machine-id: http://man7.org/linux/man-pages/man5/machine-id.5.html
`operatingSystem` string	The Operating System reported by the node
`osImage` string	OS Image reported by the node from /etc/os-release (e.g. Debian GNU/Linux 7 (wheezy)).
`systemUUID` string	SystemUUID reported by the node. For unique machine identification MachineID is preferred. This field is specific to Red Hat hosts https://access.redhat.com/documentation/en-us/red_hat_subscription_management/1/html/rhsm/uuid

NonResourceAttributes v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`NonResourceAttributes`

NonResourceAttributes includes the authorization attributes available for non-resource requests to the Authorizer interface

Appears In:

SelfSubjectAccessReviewSpec [authorization/v1]
SubjectAccessReviewSpec [authorization/v1]

Field	Description
`path` string	Path is the URL path of the request
`verb` string	Verb is the standard HTTP verb

NonResourcePolicyRule v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`NonResourcePolicyRule`

NonResourcePolicyRule is a predicate that matches non-resource requests according to their verb and the target non-resource URL. A NonResourcePolicyRule matches a request if and only if both (a) at least one member of verbs matches the request and (b) at least one member of nonResourceURLs matches the request.

Appears In:

PolicyRulesWithSubjects [flowcontrol/v1]

Field	Description
`nonResourceURLs` string array	`nonResourceURLs` is a set of url prefixes that a user should have access to and may not be empty. For example: - "/healthz" is legal - "/hea" is illegal - "/hea" is legal but matches nothing - "/hea/" also matches nothing - "/healthz/" matches all per-component health checks. "" matches all non-resource urls. if it is present, it must be the only entry. Required.
`verbs` string array	`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs. If it is present, it must be the only entry. Required.

NonResourceRule v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`NonResourceRule`

NonResourceRule holds information that describes a rule for the non-resource

Appears In:

SubjectRulesReviewStatus [authorization/v1]

Field	Description
`nonResourceURLs` string array	NonResourceURLs is a set of partial urls that a user should have access to. s are allowed, but only as the full, final step in the path. "" means all.
`verbs` string array	Verb is a list of kubernetes non-resource API verbs, like: get, post, put, delete, patch, head, options. "*" means all.

ObjectFieldSelector v1 core

Group	Version	Kind
`core`	`v1`	`ObjectFieldSelector`

ObjectFieldSelector selects an APIVersioned field of an object.

Appears In:

DownwardAPIVolumeFile [core/v1]
EnvVarSource [core/v1]

Field	Description
`apiVersion` string	Version of the schema the FieldPath is written in terms of, defaults to "v1".
`fieldPath` string	Path of the field to select in the specified API version.

ObjectMeta v1 meta

Group	Version	Kind
`meta`	`v1`	`ObjectMeta`

ObjectMeta is metadata that all persisted resources must have, which includes all objects users must create.

Appears In:

APIService [apiregistration/v1]
Binding [core/v1]
CSIDriver [storage/v1]
CSINode [storage/v1]
CSIStorageCapacity [storage/v1]
CertificateSigningRequest [certificates/v1]
ClusterRole [rbac/v1]
ClusterRoleBinding [rbac/v1]
ClusterTrustBundle [certificates/v1alpha1]
ComponentStatus [core/v1]
ConfigMap [core/v1]
ControllerRevision [apps/v1]
CronJob [batch/v1]
CustomResourceDefinition [apiextensions/v1]
DaemonSet [apps/v1]
Deployment [apps/v1]
DeviceClass [resource/v1beta1]
DeviceClass [resource/v1alpha3]
EndpointSlice [discovery/v1]
Endpoints [core/v1]
Event [core/v1]
Event [events/v1]
Eviction [policy/v1]
FlowSchema [flowcontrol/v1]
HorizontalPodAutoscaler [autoscaling/v2]
HorizontalPodAutoscaler [autoscaling/v1]
IPAddress [networking/v1beta1]
Ingress [networking/v1]
IngressClass [networking/v1]
Job [batch/v1]
JobTemplateSpec [batch/v1]
Lease [coordination/v1]
LeaseCandidate [coordination/v1alpha2]
LimitRange [core/v1]
LocalSubjectAccessReview [authorization/v1]
MutatingAdmissionPolicy [admissionregistration/v1alpha1]
MutatingAdmissionPolicyBinding [admissionregistration/v1alpha1]
MutatingWebhookConfiguration [admissionregistration/v1]
Namespace [core/v1]
NetworkPolicy [networking/v1]
Node [core/v1]
PersistentVolume [core/v1]
PersistentVolumeClaim [core/v1]
PersistentVolumeClaimTemplate [core/v1]
Pod [core/v1]
PodDisruptionBudget [policy/v1]
PodTemplate [core/v1]
PodTemplateSpec [core/v1]
PriorityClass [scheduling/v1]
PriorityLevelConfiguration [flowcontrol/v1]
ReplicaSet [apps/v1]
ReplicationController [core/v1]
ResourceClaim [resource/v1beta1]
ResourceClaim [resource/v1alpha3]
ResourceClaimTemplate [resource/v1beta1]
ResourceClaimTemplate [resource/v1alpha3]
ResourceClaimTemplateSpec [resource/v1beta1]
ResourceClaimTemplateSpec [resource/v1alpha3]
ResourceQuota [core/v1]
ResourceSlice [resource/v1beta1]
ResourceSlice [resource/v1alpha3]
Role [rbac/v1]
RoleBinding [rbac/v1]
RuntimeClass [node/v1]
Scale [autoscaling/v1]
Secret [core/v1]
SelfSubjectAccessReview [authorization/v1]
SelfSubjectReview [authentication/v1]
SelfSubjectReview [authentication/v1beta1]
SelfSubjectRulesReview [authorization/v1]
Service [core/v1]
ServiceAccount [core/v1]
ServiceCIDR [networking/v1beta1]
StatefulSet [apps/v1]
StorageClass [storage/v1]
StorageVersion [apiserverinternal/v1alpha1]
StorageVersionMigration [storagemigration/v1alpha1]
SubjectAccessReview [authorization/v1]
TokenRequest [authentication/v1]
TokenReview [authentication/v1]
ValidatingAdmissionPolicy [admissionregistration/v1]
ValidatingAdmissionPolicy [admissionregistration/v1beta1]
ValidatingAdmissionPolicyBinding [admissionregistration/v1]
ValidatingAdmissionPolicyBinding [admissionregistration/v1beta1]
ValidatingWebhookConfiguration [admissionregistration/v1]
VolumeAttachment [storage/v1]
VolumeAttributesClass [storage/v1beta1]
VolumeAttributesClass [storage/v1alpha1]

Field	Description
`annotations` object	Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata. They are not queryable and should be preserved when modifying objects. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations
`creationTimestamp` Time	CreationTimestamp is a timestamp representing the server time when this object was created. It is not guaranteed to be set in happens-before order across separate operations. Clients may not set this value. It is represented in RFC3339 form and is in UTC. Populated by the system. Read-only. Null for lists. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`deletionGracePeriodSeconds` integer	Number of seconds allowed for this object to gracefully terminate before it will be removed from the system. Only set when deletionTimestamp is also set. May only be shortened. Read-only.
`deletionTimestamp` Time	DeletionTimestamp is RFC 3339 date and time at which this resource will be deleted. This field is set by the server when a graceful deletion is requested by the user, and is not directly settable by a client. The resource is expected to be deleted (no longer visible from resource lists, and not reachable by name) after the time in this field, once the finalizers list is empty. As long as the finalizers list contains items, deletion is blocked. Once the deletionTimestamp is set, this value may not be unset or be set further into the future, although it may be shortened or the resource may be deleted prior to this time. For example, a user may request that a pod is deleted in 30 seconds. The Kubelet will react by sending a graceful termination signal to the containers in the pod. After that 30 seconds, the Kubelet will send a hard termination signal (SIGKILL) to the container and after cleanup, remove the pod from the API. In the presence of network partitions, this object may still exist after this timestamp, until an administrator or automated process can determine the resource is fully terminated. If not set, graceful deletion of the object has not been requested. Populated by the system when a graceful deletion is requested. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`finalizers` string array patch strategy: merge	Must be empty before the object is deleted from the registry. Each entry is an identifier for the responsible component that will remove the entry from the list. If the deletionTimestamp of the object is non-nil, entries in this list can only be removed. Finalizers may be processed and removed in any order. Order is NOT enforced because it introduces significant risk of stuck finalizers. finalizers is a shared field, any actor with permission can reorder it. If the finalizer list is processed in order, then this can lead to a situation in which the component responsible for the first finalizer in the list is waiting for a signal (field value, external system, or other) produced by a component responsible for a finalizer later in the list, resulting in a deadlock. Without enforced ordering finalizers are free to order amongst themselves and are not vulnerable to ordering changes in the list.
`generateName` string	GenerateName is an optional prefix, used by the server, to generate a unique name ONLY IF the Name field has not been provided. If this field is used, the name returned to the client will be different than the name passed. This value will also be combined with a unique suffix. The provided value has the same validation rules as the Name field, and may be truncated by the length of the suffix required to make the value unique on the server. If this field is specified and the generated name exists, the server will return a 409. Applied only if Name is not specified. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#idempotency
`generation` integer	A sequence number representing a specific generation of the desired state. Populated by the system. Read-only.
`labels` object	Map of string keys and values that can be used to organize and categorize (scope and select) objects. May match selectors of replication controllers and services. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels
`managedFields` ManagedFieldsEntry array	ManagedFields maps workflow-id and version to the set of fields that are managed by that workflow. This is mostly for internal housekeeping, and users typically shouldn't need to set or understand this field. A workflow can be the user's name, a controller's name, or the name of a specific apply path like "ci-cd". The set of fields is always in the version that the workflow used when modifying the object.
`name` string	Name must be unique within a namespace. Is required when creating resources, although some resources may allow a client to request the generation of an appropriate name automatically. Name is primarily intended for creation idempotence and configuration definition. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#names
`namespace` string	Namespace defines the space within which each name must be unique. An empty namespace is equivalent to the "default" namespace, but "default" is the canonical representation. Not all objects are required to be scoped to a namespace - the value of this field for those objects will be empty. Must be a DNS_LABEL. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces
`ownerReferences` OwnerReference array patch strategy: merge patch merge key: uid	List of objects depended by this object. If ALL objects in the list have been deleted, this object will be garbage collected. If this object is managed by a controller, then an entry in this list will point to this controller, with the controller field set to true. There cannot be more than one managing controller.
`resourceVersion` string	An opaque value that represents the internal version of this object that can be used by clients to determine when objects have changed. May be used for optimistic concurrency, change detection, and the watch operation on a resource or set of resources. Clients must treat these values as opaque and passed unmodified back to the server. They may only be valid for a particular resource or set of resources. Populated by the system. Read-only. Value must be treated as opaque by clients and . More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
`selfLink` string	Deprecated: selfLink is a legacy read-only field that is no longer populated by the system.
`uid` string	UID is the unique in time and space value for this object. It is typically generated by the server on successful creation of a resource and is not allowed to change on PUT operations. Populated by the system. Read-only. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

ObjectMetricSource v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ObjectMetricSource`

ObjectMetricSource indicates how to scale on a metric describing a kubernetes object (for example, hits-per-second on an Ingress object).

Appears In:

MetricSpec [autoscaling/v2]

Field	Description
`describedObject` CrossVersionObjectReference	describedObject specifies the descriptions of a object,such as kind,name apiVersion
`metric` MetricIdentifier	metric identifies the target metric by name and selector
`target` MetricTarget	target specifies the target value for the given metric

ObjectMetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ObjectMetricStatus`

ObjectMetricStatus indicates the current value of a metric describing a kubernetes object (for example, hits-per-second on an Ingress object).

Appears In:

MetricStatus [autoscaling/v2]

Field	Description
`current` MetricValueStatus	current contains the current value for the given metric
`describedObject` CrossVersionObjectReference	DescribedObject specifies the descriptions of a object,such as kind,name apiVersion
`metric` MetricIdentifier	metric identifies the target metric by name and selector

ObjectReference v1 core

Group	Version	Kind
`core`	`v1`	`ObjectReference`

ObjectReference contains enough information to let you inspect or modify the referred object.

Appears In:

Binding [core/v1]
CronJobStatus [batch/v1]
Endpoint [discovery/v1]
EndpointAddress [core/v1]
Event [core/v1]
Event [events/v1]
PersistentVolumeSpec [core/v1]
ServiceAccount [core/v1]
StorageOSPersistentVolumeSource [core/v1]

Field	Description
`apiVersion` string	API version of the referent.
`fieldPath` string	If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object.
`kind` string	Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`namespace` string	Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/
`resourceVersion` string	Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
`uid` string	UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids

OpaqueDeviceConfiguration v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`OpaqueDeviceConfiguration`

OpaqueDeviceConfiguration contains configuration parameters for a driver in a format defined by the driver vendor.

Other API versions of this object exist: v1alpha3

Appears In:

DeviceAllocationConfiguration [resource/v1beta1]
DeviceClaimConfiguration [resource/v1beta1]
DeviceClassConfiguration [resource/v1beta1]

Field	Description
`driver` string	Driver is used to determine which kubelet plugin needs to be passed these configuration parameters. An admission policy provided by the driver developer could use this to decide whether it needs to validate them. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`parameters`	Parameters can contain arbitrary data. It is the responsibility of the driver developer to handle validation and versioning. Typically this includes self-identification and a version ("kind" + "apiVersion" for Kubernetes types), with conversion between different versions. The length of the raw data must be smaller or equal to 10 Ki.

Overhead v1 node.k8s.io

Group	Version	Kind
`node.k8s.io`	`v1`	`Overhead`

Overhead structure represents the resource overhead associated with running a pod.

Appears In:

RuntimeClass [node/v1]

Field	Description
`podFixed` object	podFixed represents the fixed resource overhead associated with running a pod.

OwnerReference v1 meta

Group	Version	Kind
`meta`	`v1`	`OwnerReference`

OwnerReference contains enough information to let you identify an owning object. An owning object must be in the same namespace as the dependent, or be cluster-scoped, so there is no namespace field.

Appears In:

ObjectMeta [meta/v1]

Field	Description
`apiVersion` string	API version of the referent.
`blockOwnerDeletion` boolean	If true, AND if the owner has the "foregroundDeletion" finalizer, then the owner cannot be deleted from the key-value store until this reference is removed. See https://kubernetes.io/docs/concepts/architecture/garbage-collection/#foreground-deletion for how the garbage collector interacts with this field and enforces the foreground deletion. Defaults to false. To set this field, a user needs "delete" permission of the owner, otherwise 422 (Unprocessable Entity) will be returned.
`controller` boolean	If true, this reference points to the managing controller.
`kind` string	Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#names
`uid` string	UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

ParamKind v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ParamKind`

ParamKind is a tuple of Group Kind and Version.

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1]

Field	Description
`apiVersion` string	APIVersion is the API group version the resources belong to. In format of "group/version". Required.
`kind` string	Kind is the API kind the resources belong to. Required.

ParamRef v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ParamRef`

ParamRef describes how to locate the params to be used as input to expressions of rules applied by a policy binding.

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

ValidatingAdmissionPolicyBindingSpec [admissionregistration/v1]

Field	Description
`name` string	name is the name of the resource being referenced. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset. A single parameter used for all admission requests can be configured by setting the `name` field, leaving `selector` blank, and setting namespace if `paramKind` is namespace-scoped.
`namespace` string	namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
`parameterNotFoundAction` string	`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Required
`selector` LabelSelector	selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

ParentReference v1beta1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1beta1`	`ParentReference`

ParentReference describes a reference to a parent object.

Appears In:

IPAddressSpec [networking/v1beta1]

Field	Description
`group` string	Group is the group of the object being referenced.
`name` string	Name is the name of the object being referenced.
`namespace` string	Namespace is the namespace of the object being referenced.
`resource` string	Resource is the resource of the object being referenced.

Patch v1 meta

Group	Version	Kind
`meta`	`v1`	`Patch`

Patch is provided to give a concrete name and type to the Kubernetes PATCH request body.

Field	Description

PersistentVolumeClaimCondition v1 core

Group	Version	Kind
`core`	`v1`	`PersistentVolumeClaimCondition`

PersistentVolumeClaimCondition contains details about state of pvc

Appears In:

PersistentVolumeClaimStatus [core/v1]

Field	Description
`lastProbeTime` Time	lastProbeTime is the time we probed the condition.
`lastTransitionTime` Time	lastTransitionTime is the time the condition transitioned from one status to another.
`message` string	message is the human-readable message indicating details about last transition.
`reason` string	reason is a unique, this should be a short, machine understandable string that gives the reason for condition's last transition. If it reports "Resizing" that means the underlying persistent volume is being resized.
`status` string	Status is the status of the condition. Can be True, False, Unknown. More info: https://kubernetes.io/docs/reference/kubernetes-api/config-and-storage-resources/persistent-volume-claim-v1/#:~:text=state%20of%20pvc-,conditions.status,-(string)%2C%20required
`type` string	Type is the type of the condition. More info: https://kubernetes.io/docs/reference/kubernetes-api/config-and-storage-resources/persistent-volume-claim-v1/#:~:text=set%20to%20%27ResizeStarted%27.-,PersistentVolumeClaimCondition,-contains%20details%20about

PersistentVolumeClaimTemplate v1 core

Group	Version	Kind
`core`	`v1`	`PersistentVolumeClaimTemplate`

PersistentVolumeClaimTemplate is used to produce PersistentVolumeClaim objects as part of an EphemeralVolumeSource.

Appears In:

EphemeralVolumeSource [core/v1]

Field	Description
`metadata` ObjectMeta	May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.
`spec` PersistentVolumeClaimSpec	The specification for the PersistentVolumeClaim. The entire content is copied unchanged into the PVC that gets created from this template. The same fields as in a PersistentVolumeClaim are also valid here.

PersistentVolumeClaimVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`PersistentVolumeClaimVolumeSource`

PersistentVolumeClaimVolumeSource references the user's PVC in the same namespace. This volume finds the bound PV and mounts that volume for the pod. A PersistentVolumeClaimVolumeSource is, essentially, a wrapper around another type of volume that is owned by someone else (the system).

Appears In:

Volume [core/v1]

Field	Description
`claimName` string	claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
`readOnly` boolean	readOnly Will force the ReadOnly setting in VolumeMounts. Default false.

PhotonPersistentDiskVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`PhotonPersistentDiskVolumeSource`

Represents a Photon Controller persistent disk resource.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`pdID` string	pdID is the ID that identifies Photon Controller persistent disk

PodAffinity v1 core

Group	Version	Kind
`core`	`v1`	`PodAffinity`

Pod affinity is a group of inter pod affinity scheduling rules.

Appears In:

Affinity [core/v1]

Field Description

preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm array The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm array If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

PodAffinityTerm v1 core

Group	Version	Kind
`core`	`v1`	`PodAffinityTerm`

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

Appears In:

PodAffinity [core/v1]
PodAntiAffinity [core/v1]
WeightedPodAffinityTerm [core/v1]

Field	Description
`labelSelector` LabelSelector	A label query over a set of resources, in this case pods. If it's null, this PodAffinityTerm matches with no Pods.
`matchLabelKeys` string array	MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn't set. This is a beta field and requires enabling MatchLabelKeysInPodAffinity feature gate (enabled by default).
`mismatchLabelKeys` string array	MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn't set. This is a beta field and requires enabling MatchLabelKeysInPodAffinity feature gate (enabled by default).
`namespaceSelector` LabelSelector	A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod's namespace". An empty selector ({}) matches all namespaces.
`namespaces` string array	namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod's namespace".
`topologyKey` string	This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

PodAntiAffinity v1 core

Group	Version	Kind
`core`	`v1`	`PodAntiAffinity`

Pod anti affinity is a group of inter pod anti affinity scheduling rules.

Appears In:

Affinity [core/v1]

Field Description

preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm array The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm array If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

PodCondition v1 core

Group	Version	Kind
`core`	`v1`	`PodCondition`

PodCondition contains details for the current condition of this pod.

Appears In:

PodStatus [core/v1]

Field	Description
`lastProbeTime` Time	Last time we probed the condition.
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	Human-readable message indicating details about last transition.
`reason` string	Unique, one-word, CamelCase reason for the condition's last transition.
`status` string	Status is the status of the condition. Can be True, False, Unknown. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
`type` string	Type is the type of the condition. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions

PodDNSConfig v1 core

Group	Version	Kind
`core`	`v1`	`PodDNSConfig`

PodDNSConfig defines the DNS parameters of a pod in addition to those generated from DNSPolicy.

Appears In:

PodSpec [core/v1]

Field	Description
`nameservers` string array	A list of DNS name server IP addresses. This will be appended to the base nameservers generated from DNSPolicy. Duplicated nameservers will be removed.
`options` PodDNSConfigOption array	A list of DNS resolver options. This will be merged with the base options generated from DNSPolicy. Duplicated entries will be removed. Resolution options given in Options will override those that appear in the base DNSPolicy.
`searches` string array	A list of DNS search domains for host-name lookup. This will be appended to the base search paths generated from DNSPolicy. Duplicated search paths will be removed.

PodDNSConfigOption v1 core

Group	Version	Kind
`core`	`v1`	`PodDNSConfigOption`

PodDNSConfigOption defines DNS resolver options of a pod.

Appears In:

PodDNSConfig [core/v1]

Field	Description
`name` string	Name is this DNS resolver option's name. Required.
`value` string	Value is this DNS resolver option's value.

PodFailurePolicy v1 batch

Group	Version	Kind
`batch`	`v1`	`PodFailurePolicy`

PodFailurePolicy describes how failed pods influence the backoffLimit.

Appears In:

JobSpec [batch/v1]

Field	Description
`rules` PodFailurePolicyRule array	A list of pod failure policy rules. The rules are evaluated in order. Once a rule matches a Pod failure, the remaining of the rules are ignored. When no rule matches the Pod failure, the default handling applies - the counter of pod failures is incremented and it is checked against the backoffLimit. At most 20 elements are allowed.

PodFailurePolicyOnExitCodesRequirement v1 batch

Group	Version	Kind
`batch`	`v1`	`PodFailurePolicyOnExitCodesRequirement`

PodFailurePolicyOnExitCodesRequirement describes the requirement for handling a failed pod based on its container exit codes. In particular, it lookups the .state.terminated.exitCode for each app container and init container status, represented by the .status.containerStatuses and .status.initContainerStatuses fields in the Pod status, respectively. Containers completed with success (exit code 0) are excluded from the requirement check.

Appears In:

PodFailurePolicyRule [batch/v1]

Field	Description
`containerName` string	Restricts the check for exit codes to the container with the specified name. When null, the rule applies to all containers. When specified, it should match one the container or initContainer names in the pod template.
`operator` string	Represents the relationship between the container exit code(s) and the specified values. Containers completed with success (exit code 0) are excluded from the requirement check. Possible values are: - In: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is in the set of specified values. - NotIn: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is not in the set of specified values. Additional values are considered to be added in the future. Clients should react to an unknown operator by assuming the requirement is not satisfied.
`values` integer array	Specifies the set of values. Each returned container exit code (might be multiple in case of multiple containers) is checked against this set of values with respect to the operator. The list of values must be ordered and must not contain duplicates. Value '0' cannot be used for the In operator. At least one element is required. At most 255 elements are allowed.

PodFailurePolicyOnPodConditionsPattern v1 batch

Group	Version	Kind
`batch`	`v1`	`PodFailurePolicyOnPodConditionsPattern`

PodFailurePolicyOnPodConditionsPattern describes a pattern for matching an actual pod condition type.

Appears In:

PodFailurePolicyRule [batch/v1]

Field	Description
`status` string	Specifies the required Pod condition status. To match a pod condition it is required that the specified status equals the pod condition status. Defaults to True.
`type` string	Specifies the required Pod condition type. To match a pod condition it is required that specified type equals the pod condition type.

PodFailurePolicyRule v1 batch

Group	Version	Kind
`batch`	`v1`	`PodFailurePolicyRule`

PodFailurePolicyRule describes how a pod failure is handled when the requirements are met. One of onExitCodes and onPodConditions, but not both, can be used in each rule.

Appears In:

PodFailurePolicy [batch/v1]

Field	Description
`action` string	Specifies the action taken on a pod failure when the requirements are satisfied. Possible values are: - FailJob: indicates that the pod's job is marked as Failed and all running pods are terminated. - FailIndex: indicates that the pod's index is marked as Failed and will not be restarted. This value is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default). - Ignore: indicates that the counter towards the .backoffLimit is not incremented and a replacement pod is created. - Count: indicates that the pod is handled in the default way - the counter towards the .backoffLimit is incremented. Additional values are considered to be added in the future. Clients should react to an unknown action by skipping the rule.
`onExitCodes` PodFailurePolicyOnExitCodesRequirement	Represents the requirement on the container exit codes.
`onPodConditions` PodFailurePolicyOnPodConditionsPattern array	Represents the requirement on the pod conditions. The requirement is represented as a list of pod condition patterns. The requirement is satisfied if at least one pattern matches an actual pod condition. At most 20 elements are allowed.

PodIP v1 core

Group	Version	Kind
`core`	`v1`	`PodIP`

PodIP represents a single IP address allocated to the pod.

Appears In:

PodStatus [core/v1]

Field	Description
`ip` string	IP is the IP address assigned to the pod

PodOS v1 core

Group	Version	Kind
`core`	`v1`	`PodOS`

PodOS defines the OS parameters of a pod.

Appears In:

PodSpec [core/v1]

Field	Description
`name` string	Name is the name of the operating system. The currently supported values are linux and windows. Additional value may be defined in future and can be one of: https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration Clients should expect to handle additional values and treat unrecognized values in this field as os: null

PodReadinessGate v1 core

Group	Version	Kind
`core`	`v1`	`PodReadinessGate`

PodReadinessGate contains the reference to a pod condition

Appears In:

PodSpec [core/v1]

Field	Description
`conditionType` string	ConditionType refers to a condition in the pod's condition list with matching type.

PodResourceClaim v1 core

Group	Version	Kind
`core`	`v1`	`PodResourceClaim`

PodResourceClaim references exactly one ResourceClaim, either directly or by naming a ResourceClaimTemplate which is then turned into a ResourceClaim for the pod. It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. Containers that need access to the ResourceClaim reference it with this name.

Appears In:

PodSpec [core/v1]

Field	Description
`name` string	Name uniquely identifies this resource claim inside the pod. This must be a DNS_LABEL.
`resourceClaimName` string	ResourceClaimName is the name of a ResourceClaim object in the same namespace as this pod. Exactly one of ResourceClaimName and ResourceClaimTemplateName must be set.
`resourceClaimTemplateName` string	ResourceClaimTemplateName is the name of a ResourceClaimTemplate object in the same namespace as this pod. The template will be used to create a new ResourceClaim, which will be bound to this pod. When this pod is deleted, the ResourceClaim will also be deleted. The pod name and resource name, along with a generated component, will be used to form a unique name for the ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. This field is immutable and no changes will be made to the corresponding ResourceClaim by the control plane after creating the ResourceClaim. Exactly one of ResourceClaimName and ResourceClaimTemplateName must be set.

PodSchedulingGate v1 core

Group	Version	Kind
`core`	`v1`	`PodSchedulingGate`

PodSchedulingGate is associated to a Pod to guard its scheduling.

Appears In:

PodSpec [core/v1]

Field	Description
`name` string	Name of the scheduling gate. Each scheduling gate must have a unique name field.

PodSecurityContext v1 core

Group	Version	Kind
`core`	`v1`	`PodSecurityContext`

PodSecurityContext holds pod-level security attributes and common container settings. Some fields are also present in container.securityContext. Field values of container.securityContext take precedence over field values of PodSecurityContext.

Appears In:

PodSpec [core/v1]

Field	Description
`appArmorProfile` AppArmorProfile	appArmorProfile is the AppArmor options to use by the containers in this pod. Note that this field cannot be set when spec.os.name is windows.
`fsGroup` integer	A special supplemental group that applies to all containers in a pod. Some volume types allow the Kubelet to change the ownership of that volume to be owned by the pod: 1. The owning GID will be the FSGroup 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) 3. The permission bits are OR'd with rw-rw---- If unset, the Kubelet will not modify the ownership and permissions of any volume. Note that this field cannot be set when spec.os.name is windows.
`fsGroupChangePolicy` string	fsGroupChangePolicy defines behavior of changing ownership and permission of the volume before being exposed inside Pod. This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir. Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. Note that this field cannot be set when spec.os.name is windows.
`runAsGroup` integer	The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
`runAsNonRoot` boolean	Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
`runAsUser` integer	The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
`seLinuxChangePolicy` string	seLinuxChangePolicy defines how the container's SELinux label is applied to all volumes used by the Pod. It has no effect on nodes that do not support SELinux or to volumes does not support SELinux. Valid values are "MountOption" and "Recursive". "Recursive" means relabeling of all files on all Pod volumes by the container runtime. This may be slow for large volumes, but allows mixing privileged and unprivileged Pods sharing the same volume on the same node. "MountOption" mounts all eligible Pod volumes with `-o context` mount option. This requires all Pods that share the same volume to use the same SELinux label. It is not possible to share the same volume among privileged and unprivileged Pods. Eligible volumes are in-tree FibreChannel and iSCSI volumes, and all CSI volumes whose CSI driver announces SELinux support by setting spec.seLinuxMount: true in their CSIDriver instance. Other volumes are always re-labelled recursively. "MountOption" value is allowed only when SELinuxMount feature gate is enabled. If not specified and SELinuxMount feature gate is enabled, "MountOption" is used. If not specified and SELinuxMount feature gate is disabled, "MountOption" is used for ReadWriteOncePod volumes and "Recursive" for all other volumes. This field affects only Pods that have SELinux label set, either in PodSecurityContext or in SecurityContext of all containers. All Pods that use the same volume should use the same seLinuxChangePolicy, otherwise some pods can get stuck in ContainerCreating state. Note that this field cannot be set when spec.os.name is windows.
`seLinuxOptions` SELinuxOptions	The SELinux context to be applied to all containers. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
`seccompProfile` SeccompProfile	The seccomp options to use by the containers in this pod. Note that this field cannot be set when spec.os.name is windows.
`supplementalGroups` integer array	A list of groups applied to the first process run in each container, in addition to the container's primary GID and fsGroup (if specified). If the SupplementalGroupsPolicy feature is enabled, the supplementalGroupsPolicy field determines whether these are in addition to or instead of any group memberships defined in the container image. If unspecified, no additional groups are added, though group memberships defined in the container image may still be used, depending on the supplementalGroupsPolicy field. Note that this field cannot be set when spec.os.name is windows.
`supplementalGroupsPolicy` string	Defines how supplemental groups of the first container processes are calculated. Valid values are "Merge" and "Strict". If not specified, "Merge" is used. (Alpha) Using the field requires the SupplementalGroupsPolicy feature gate to be enabled and the container runtime must implement support for this feature. Note that this field cannot be set when spec.os.name is windows.
`sysctls` Sysctl array	Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported sysctls (by the container runtime) might fail to launch. Note that this field cannot be set when spec.os.name is windows.
`windowsOptions` WindowsSecurityContextOptions	The Windows specific settings applied to all containers. If unspecified, the options within a container's SecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.

PodsMetricSource v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`PodsMetricSource`

PodsMetricSource indicates how to scale on a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.

Appears In:

MetricSpec [autoscaling/v2]

Field	Description
`metric` MetricIdentifier	metric identifies the target metric by name and selector
`target` MetricTarget	target specifies the target value for the given metric

PodsMetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`PodsMetricStatus`

PodsMetricStatus indicates the current value of a metric describing each pod in the current scale target (for example, transactions-processed-per-second).

Appears In:

MetricStatus [autoscaling/v2]

Field	Description
`current` MetricValueStatus	current contains the current value for the given metric
`metric` MetricIdentifier	metric identifies the target metric by name and selector

PolicyRule v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`PolicyRule`

PolicyRule holds information that describes a policy rule, but does not contain information about who the rule applies to or which namespace the rule applies to.

Appears In:

ClusterRole [rbac/v1]
Role [rbac/v1]

Field	Description
`apiGroups` string array	APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "" represents the core API group and "*" represents all API groups.
`nonResourceURLs` string array	NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path Since non-resource URLs are not namespaced, this field is only applicable for ClusterRoles referenced from a ClusterRoleBinding. Rules can either apply to API resources (such as "pods" or "secrets") or non-resource URL paths (such as "/api"), but not both.
`resourceNames` string array	ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
`resources` string array	Resources is a list of resources this rule applies to. '*' represents all resources.
`verbs` string array	Verbs is a list of Verbs that apply to ALL the ResourceKinds contained in this rule. '*' represents all verbs.

PolicyRulesWithSubjects v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`PolicyRulesWithSubjects`

PolicyRulesWithSubjects prescribes a test that applies to a request to an apiserver. The test considers the subject making the request, the verb being requested, and the resource to be acted upon. This PolicyRulesWithSubjects matches a request if and only if both (a) at least one member of subjects matches the request and (b) at least one member of resourceRules or nonResourceRules matches the request.

Appears In:

FlowSchemaSpec [flowcontrol/v1]

Field	Description
`nonResourceRules` NonResourcePolicyRule array	`nonResourceRules` is a list of NonResourcePolicyRules that identify matching requests according to their verb and the target non-resource URL.
`resourceRules` ResourcePolicyRule array	`resourceRules` is a slice of ResourcePolicyRules that identify matching requests according to their verb and the target resource. At least one of `resourceRules` and `nonResourceRules` has to be non-empty.
`subjects` Subject array	subjects is the list of normal user, serviceaccount, or group that this rule cares about. There must be at least one member in this slice. A slice that includes both the system:authenticated and system:unauthenticated user groups matches every request. Required.

PortStatus v1 core

Group	Version	Kind
`core`	`v1`	`PortStatus`

PortStatus represents the error condition of a service port

Appears In:

LoadBalancerIngress [core/v1]

Field	Description
`error` string	Error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names - cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
`port` integer	Port is the port number of the service port of which status is recorded here
`protocol` string	Protocol is the protocol of the service port of which status is recorded here The supported values are: "TCP", "UDP", "SCTP"

PortworxVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`PortworxVolumeSource`

PortworxVolumeSource represents a Portworx volume resource.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fSType represents the filesystem type to mount Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified.
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`volumeID` string	volumeID uniquely identifies a Portworx volume

Preconditions v1 meta

Group	Version	Kind
`meta`	`v1`	`Preconditions`

Preconditions must be fulfilled before an operation (update, delete, etc.) is carried out.

Appears In:

DeleteOptions [meta/v1]

Field	Description
`resourceVersion` string	Specifies the target ResourceVersion
`uid` string	Specifies the target UID.

PreferredSchedulingTerm v1 core

Group	Version	Kind
`core`	`v1`	`PreferredSchedulingTerm`

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

Appears In:

NodeAffinity [core/v1]

Field	Description
`preference` NodeSelectorTerm	A node selector term, associated with the corresponding weight.
`weight` integer	Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

PriorityLevelConfigurationCondition v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`PriorityLevelConfigurationCondition`

PriorityLevelConfigurationCondition defines the condition of priority level.

Appears In:

PriorityLevelConfigurationStatus [flowcontrol/v1]

Field	Description
`lastTransitionTime` Time	`lastTransitionTime` is the last time the condition transitioned from one status to another.
`message` string	`message` is a human-readable message indicating details about last transition.
`reason` string	`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
`status` string	`status` is the status of the condition. Can be True, False, Unknown. Required.
`type` string	`type` is the type of the condition. Required.

PriorityLevelConfigurationReference v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`PriorityLevelConfigurationReference`

PriorityLevelConfigurationReference contains information that points to the "request-priority" being used.

Appears In:

FlowSchemaSpec [flowcontrol/v1]

Field	Description
`name` string	`name` is the name of the priority level configuration being referenced Required.

Probe v1 core

Group	Version	Kind
`core`	`v1`	`Probe`

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`exec` ExecAction	Exec specifies a command to execute in the container.
`failureThreshold` integer	Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
`grpc` GRPCAction	GRPC specifies a GRPC HealthCheckRequest.
`httpGet` HTTPGetAction	HTTPGet specifies an HTTP GET request to perform.
`initialDelaySeconds` integer	Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
`periodSeconds` integer	How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
`successThreshold` integer	Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
`tcpSocket` TCPSocketAction	TCPSocket specifies a connection to a TCP port.
`terminationGracePeriodSeconds` integer	Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
`timeoutSeconds` integer	Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

ProjectedVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ProjectedVolumeSource`

Represents a projected volume source

Appears In:

Volume [core/v1]

Field Description

defaultMode
integer defaultMode are the mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

sources
VolumeProjection array sources is the list of volume projections. Each entry in this list handles one source.

Quantity resource core

Group	Version	Kind
`core`	`resource`	`Quantity`

Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors. The serialization format is: ``` <quantity> ::= <signedNumber><suffix> (Note that <suffix> may be empty, from the "" case in <decimalSI>.) <digit> ::= 0 | 1 | ... | 9 <digits> ::= <digit> | <digit><digits> <number> ::= <digits> | <digits>.<digits> | <digits>. | .<digits> <sign> ::= "+" | "-" <signedNumber> ::= <number> | <sign><number> <suffix> ::= <binarySI> | <decimalExponent> | <decimalSI> <binarySI> ::= Ki | Mi | Gi | Ti | Pi | Ei (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html) <decimalSI> ::= m | "" | k | M | G | T | P | E (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.) <decimalExponent> ::= "e" <signedNumber> | "E" <signedNumber> ``` No matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities. When a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized. Before serializing, Quantity will be put in "canonical form". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that: - No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible. The sign will be omitted unless the number is negative. Examples: - 1.5 will be serialized as "1500m" - 1.5Gi will be serialized as "1536Mi" Note that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise. Non-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.) This format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.

Appears In:

BasicDevice [resource/v1alpha3]
CSIStorageCapacity [storage/v1]
ContainerStatus [core/v1]
DeviceCapacity [resource/v1beta1]
EmptyDirVolumeSource [core/v1]
LimitRangeItem [core/v1]
MetricTarget [autoscaling/v2]
MetricValueStatus [autoscaling/v2]
NodeStatus [core/v1]
Overhead [node/v1]
PersistentVolumeClaimStatus [core/v1]
PersistentVolumeSpec [core/v1]
PodSpec [core/v1]
ResourceFieldSelector [core/v1]
ResourceQuotaSpec [core/v1]
ResourceQuotaStatus [core/v1]
ResourceRequirements [core/v1]
VolumeResourceRequirements [core/v1]

Field	Description

QueuingConfiguration v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`QueuingConfiguration`

QueuingConfiguration holds the configuration parameters for queuing

Appears In:

LimitResponse [flowcontrol/v1]

Field	Description
`handSize` integer	`handSize` is a small positive number that configures the shuffle sharding of requests into queues. When enqueuing a request at this priority level the request's flow identifier (a string pair) is hashed and the hash value is used to shuffle the list of queues and deal a hand of the size specified here. The request is put into one of the shortest queues in that hand. `handSize` must be no larger than `queues`, and should be significantly smaller (so that a few heavy flows do not saturate most of the queues). See the user-facing documentation for more extensive guidance on setting this field. This field has a default value of 8.
`queueLengthLimit` integer	`queueLengthLimit` is the maximum number of requests allowed to be waiting in a given queue of this priority level at a time; excess requests are rejected. This value must be positive. If not specified, it will be defaulted to 50.
`queues` integer	`queues` is the number of queues for this priority level. The queues exist independently at each apiserver. The value must be positive. Setting it to 1 effectively precludes shufflesharding and thus makes the distinguisher method of associated flow schemas irrelevant. This field has a default value of 64.

QuobyteVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`QuobyteVolumeSource`

Represents a Quobyte mount that lasts the lifetime of a pod. Quobyte volumes do not support ownership management or SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`group` string	group to map volume access to Default is no group
`readOnly` boolean	readOnly here will force the Quobyte volume to be mounted with read-only permissions. Defaults to false.
`registry` string	registry represents a single or multiple Quobyte Registry services specified as a string as host:port pair (multiple entries are separated with commas) which acts as the central registry for volumes
`tenant` string	tenant owning the given Quobyte volume in the Backend Used with dynamically provisioned Quobyte volumes, value is set by the plugin
`user` string	user to map volume access to Defaults to serivceaccount user
`volume` string	volume is a string that references an already created Quobyte volume by name.

RBDPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`RBDPersistentVolumeSource`

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
`image` string	image is the rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`keyring` string	keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`monitors` string array	monitors is a collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`pool` string	pool is the rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`readOnly` boolean	readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`secretRef` SecretReference	secretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`user` string	user is the rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

RBDVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`RBDVolumeSource`

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
`image` string	image is the rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`keyring` string	keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`monitors` string array	monitors is a collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`pool` string	pool is the rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`readOnly` boolean	readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`secretRef` LocalObjectReference	secretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
`user` string	user is the rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

ReplicaSetCondition v1 apps

Group	Version	Kind
`apps`	`v1`	`ReplicaSetCondition`

ReplicaSetCondition describes the state of a replica set at a certain point.

Appears In:

ReplicaSetStatus [apps/v1]

Field	Description
`lastTransitionTime` Time	The last time the condition transitioned from one status to another.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of replica set condition.

ReplicationControllerCondition v1 core

Group	Version	Kind
`core`	`v1`	`ReplicationControllerCondition`

ReplicationControllerCondition describes the state of a replication controller at a certain point.

Appears In:

ReplicationControllerStatus [core/v1]

Field	Description
`lastTransitionTime` Time	The last time the condition transitioned from one status to another.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of replication controller condition.

ResourceAttributes v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`ResourceAttributes`

ResourceAttributes includes the authorization attributes available for resource requests to the Authorizer interface

Appears In:

SelfSubjectAccessReviewSpec [authorization/v1]
SubjectAccessReviewSpec [authorization/v1]

Field	Description
`fieldSelector` FieldSelectorAttributes	fieldSelector describes the limitation on access based on field. It can only limit access, not broaden it. This field is alpha-level. To use this field, you must enable the `AuthorizeWithSelectors` feature gate (disabled by default).
`group` string	Group is the API Group of the Resource. "*" means all.
`labelSelector` LabelSelectorAttributes	labelSelector describes the limitation on access based on labels. It can only limit access, not broaden it. This field is alpha-level. To use this field, you must enable the `AuthorizeWithSelectors` feature gate (disabled by default).
`name` string	Name is the name of the resource being requested for a "get" or deleted for a "delete". "" (empty) means all.
`namespace` string	Namespace is the namespace of the action being requested. Currently, there is no distinction between no namespace and all namespaces "" (empty) is defaulted for LocalSubjectAccessReviews "" (empty) is empty for cluster-scoped resources "" (empty) means "all" for namespace scoped resources from a SubjectAccessReview or SelfSubjectAccessReview
`resource` string	Resource is one of the existing resource types. "*" means all.
`subresource` string	Subresource is one of the existing resource types. "" means none.
`verb` string	Verb is a kubernetes resource API verb, like: get, list, watch, create, update, delete, proxy. "*" means all.
`version` string	Version is the API Version of the Resource. "*" means all.

ResourceClaim v1 core

Group	Version	Kind
`core`	`v1`	`ResourceClaim`

ResourceClaim references one entry in PodSpec.ResourceClaims.

Other API versions of this object exist: v1beta1 v1alpha3

Appears In:

ResourceRequirements [core/v1]

Field	Description
`name` string	Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
`request` string	Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.

ResourceClaimConsumerReference v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourceClaimConsumerReference`

ResourceClaimConsumerReference contains enough information to let you locate the consumer of a ResourceClaim. The user must be a resource in the same namespace as the ResourceClaim.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceClaimStatus [resource/v1beta1]

Field	Description
`apiGroup` string	APIGroup is the group for the resource being referenced. It is empty for the core API. This matches the group in the APIVersion that is used when creating the resources.
`name` string	Name is the name of resource being referenced.
`resource` string	Resource is the type of resource being referenced, for example "pods".
`uid` string	UID identifies exactly one incarnation of the resource.

ResourceFieldSelector v1 core

Group	Version	Kind
`core`	`v1`	`ResourceFieldSelector`

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Appears In:

DownwardAPIVolumeFile [core/v1]
EnvVarSource [core/v1]

Field	Description
`containerName` string	Container name: required for volumes, optional for env vars
`divisor` Quantity	Specifies the output format of the exposed resources, defaults to "1"
`resource` string	Required: resource to select

ResourceHealth v1 core

Group	Version	Kind
`core`	`v1`	`ResourceHealth`

ResourceHealth represents the health of a resource. It has the latest device health information. This is a part of KEP https://kep.k8s.io/4680.

Appears In:

ResourceStatus [core/v1]

Field Description

health
string Health of the resource. can be one of: - Healthy: operates as normal - Unhealthy: reported unhealthy. We consider this a temporary health issue since we do not have a mechanism today to distinguish temporary and permanent issues. - Unknown: The status cannot be determined. For example, Device Plugin got unregistered and hasn't been re-registered since. In future we may want to introduce the PermanentlyUnhealthy Status.

resourceID
string ResourceID is the unique identifier of the resource. See the ResourceID type for more information.

ResourceMetricSource v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ResourceMetricSource`

ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.

Appears In:

MetricSpec [autoscaling/v2]

Field	Description
`name` string	name is the name of the resource in question.
`target` MetricTarget	target specifies the target value for the given metric

ResourceMetricStatus v2 autoscaling

Group	Version	Kind
`autoscaling`	`v2`	`ResourceMetricStatus`

ResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.

Appears In:

MetricStatus [autoscaling/v2]

Field	Description
`current` MetricValueStatus	current contains the current value for the given metric
`name` string	name is the name of the resource in question.

ResourcePolicyRule v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`ResourcePolicyRule`

ResourcePolicyRule is a predicate that matches some resource requests, testing the request's verb and the target resource. A ResourcePolicyRule matches a resource request if and only if: (a) at least one member of verbs matches the request, (b) at least one member of apiGroups matches the request, (c) at least one member of resources matches the request, and (d) either (d1) the request does not specify a namespace (i.e., `Namespace==""`) and clusterScope is true or (d2) the request specifies a namespace and least one member of namespaces matches the request's namespace.

Appears In:

PolicyRulesWithSubjects [flowcontrol/v1]

Field	Description
`apiGroups` string array	`apiGroups` is a list of matching API groups and may not be empty. "*" matches all API groups and, if present, must be the only entry. Required.
`clusterScope` boolean	`clusterScope` indicates whether to match requests that do not specify a namespace (which happens either because the resource is not namespaced or the request targets all namespaces). If this field is omitted or false then the `namespaces` field must contain a non-empty list.
`namespaces` string array	`namespaces` is a list of target namespaces that restricts matches. A request that specifies a target namespace matches only if either (a) this list contains that target namespace or (b) this list contains "". Note that "" matches any specified namespace but does not match a request that _does not specify_ a namespace (see the `clusterScope` field for that). This list may be empty, but only if `clusterScope` is true.
`resources` string array	`resources` is a list of matching resources (i.e., lowercase and plural) with, if desired, subresource. For example, [ "services", "nodes/status" ]. This list may not be empty. "*" matches all resources and, if present, must be the only entry. Required.
`verbs` string array	`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs and, if present, must be the only entry. Required.

ResourcePool v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourcePool`

ResourcePool describes the pool that ResourceSlices belong to.

Other API versions of this object exist: v1alpha3

Appears In:

ResourceSliceSpec [resource/v1beta1]

Field	Description
`generation` integer	Generation tracks the change in a pool over time. Whenever a driver changes something about one or more of the resources in a pool, it must change the generation in all ResourceSlices which are part of that pool. Consumers of ResourceSlices should only consider resources from the pool with the highest generation number. The generation may be reset by drivers, which should be fine for consumers, assuming that all ResourceSlices in a pool are updated to match or deleted. Combined with ResourceSliceCount, this mechanism enables consumers to detect pools which are comprised of multiple ResourceSlices and are in an incomplete state.
`name` string	Name is used to identify the pool. For node-local devices, this is often the node name, but this is not required. It must not be longer than 253 characters and must consist of one or more DNS sub-domains separated by slashes. This field is immutable.
`resourceSliceCount` integer	ResourceSliceCount is the total number of ResourceSlices in the pool at this generation number. Must be greater than zero. Consumers can use this to check whether they have seen all ResourceSlices belonging to the same pool.

ResourceRequirements v1 core

Group	Version	Kind
`core`	`v1`	`ResourceRequirements`

ResourceRequirements describes the compute resource requirements.

Appears In:

Container [core/v1]
ContainerStatus [core/v1]
EphemeralContainer [core/v1]
PodSpec [core/v1]

Field	Description
`claims` ResourceClaim array	Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable. It can only be set for containers.
`limits` object	Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
`requests` object	Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

ResourceRule v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`ResourceRule`

ResourceRule is the list of actions the subject is allowed to perform on resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.

Appears In:

SubjectRulesReviewStatus [authorization/v1]

Field	Description
`apiGroups` string array	APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "*" means all.
`resourceNames` string array	ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed. "*" means all.
`resources` string array	Resources is a list of resources this rule applies to. "" means all in the specified apiGroups. "/foo" represents the subresource 'foo' for all resources in the specified apiGroups.
`verbs` string array	Verb is a list of kubernetes resource API verbs, like: get, list, watch, create, update, delete, proxy. "*" means all.

ResourceStatus v1 core

Group	Version	Kind
`core`	`v1`	`ResourceStatus`

ResourceStatus represents the status of a single resource allocated to a Pod.

Appears In:

ContainerStatus [core/v1]

Field Description

name
string Name of the resource. Must be unique within the pod and in case of non-DRA resource, match one of the resources from the pod spec. For DRA resources, the value must be "claim:<claim_name>/<request>". When this status is reported about a container, the "claim_name" and "request" must match one of the claims of this container.

resources
ResourceHealth array List of unique resources health. Each element in the list contains an unique resource ID and its health. At a minimum, for the lifetime of a Pod, resource ID must uniquely identify the resource allocated to the Pod on the Node. If other Pod on the same Node reports the status with the same resource ID, it must be the same resource they share. See ResourceID type definition for a specific format it has in various use cases.

RoleRef v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`RoleRef`

RoleRef contains information that points to the role being used

Appears In:

ClusterRoleBinding [rbac/v1]
RoleBinding [rbac/v1]

Field	Description
`apiGroup` string	APIGroup is the group for the resource being referenced
`kind` string	Kind is the type of resource being referenced
`name` string	Name is the name of resource being referenced

RollingUpdateStatefulSetStrategy v1 apps

Group	Version	Kind
`apps`	`v1`	`RollingUpdateStatefulSetStrategy`

RollingUpdateStatefulSetStrategy is used to communicate parameter for RollingUpdateStatefulSetStrategyType.

Appears In:

StatefulSetUpdateStrategy [apps/v1]

Field Description

maxUnavailable The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding up. This can not be 0. Defaults to 1. This field is alpha-level and is only honored by servers that enable the MaxUnavailableStatefulSet feature. The field applies to all pods in the range 0 to Replicas-1. That means if there is any unavailable pod in the range 0 to Replicas-1, it will be counted towards MaxUnavailable.

partition
integer Partition indicates the ordinal at which the StatefulSet should be partitioned for updates. During a rolling update, all pods from ordinal Replicas-1 to Partition are updated. All pods from ordinal Partition-1 to 0 remain untouched. This is helpful in being able to do a canary based deployment. The default value is 0.

RuleWithOperations v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`RuleWithOperations`

RuleWithOperations is a tuple of Operations and Resources. It is recommended to make sure that all the tuple expansions are valid.

Appears In:

MutatingWebhook [admissionregistration/v1]
ValidatingWebhook [admissionregistration/v1]

Field	Description
`apiGroups` string array	APIGroups is the API groups the resources belong to. '' is all groups. If '' is present, the length of the slice must be one. Required.
`apiVersions` string array	APIVersions is the API versions the resources belong to. '' is all versions. If '' is present, the length of the slice must be one. Required.
`operations` string array	Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
`resources` string array	Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '' means all resources, but not subresources. 'pods/' means all subresources of pods. '/scale' means all scale subresources. '/*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
`scope` string	scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

SELinuxOptions v1 core

Group	Version	Kind
`core`	`v1`	`SELinuxOptions`

SELinuxOptions are the labels to be applied to the container

Appears In:

PodSecurityContext [core/v1]
SecurityContext [core/v1]

Field	Description
`level` string	Level is SELinux level label that applies to the container.
`role` string	Role is a SELinux role label that applies to the container.
`type` string	Type is a SELinux type label that applies to the container.
`user` string	User is a SELinux user label that applies to the container.

Scale v1 autoscaling

Group	Version	Kind
`autoscaling`	`v1`	`Scale`

Scale represents a scaling request for a resource.

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` ScaleSpec	spec defines the behavior of the scale. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
`status` ScaleStatus	status is the current status of the scale. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status. Read-only.

ScaleIOPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ScaleIOPersistentVolumeSource`

ScaleIOPersistentVolumeSource represents a persistent ScaleIO volume

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs"
`gateway` string	gateway is the host address of the ScaleIO API Gateway.
`protectionDomain` string	protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` SecretReference	secretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail.
`sslEnabled` boolean	sslEnabled is the flag to enable/disable SSL communication with Gateway, default false
`storageMode` string	storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned.
`storagePool` string	storagePool is the ScaleIO Storage Pool associated with the protection domain.
`system` string	system is the name of the storage system as configured in ScaleIO.
`volumeName` string	volumeName is the name of a volume already created in the ScaleIO system that is associated with this volume source.

ScaleIOVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`ScaleIOVolumeSource`

ScaleIOVolumeSource represents a persistent ScaleIO volume

Appears In:

Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs".
`gateway` string	gateway is the host address of the ScaleIO API Gateway.
`protectionDomain` string	protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.
`readOnly` boolean	readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` LocalObjectReference	secretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail.
`sslEnabled` boolean	sslEnabled Flag enable/disable SSL communication with Gateway, default false
`storageMode` string	storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned.
`storagePool` string	storagePool is the ScaleIO Storage Pool associated with the protection domain.
`system` string	system is the name of the storage system as configured in ScaleIO.
`volumeName` string	volumeName is the name of a volume already created in the ScaleIO system that is associated with this volume source.

Scheduling v1 node.k8s.io

Group	Version	Kind
`node.k8s.io`	`v1`	`Scheduling`

Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.

Appears In:

RuntimeClass [node/v1]

Field	Description
`nodeSelector` object	nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
`tolerations` Toleration array	tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.

ScopeSelector v1 core

Group	Version	Kind
`core`	`v1`	`ScopeSelector`

A scope selector represents the AND of the selectors represented by the scoped-resource selector requirements.

Appears In:

ResourceQuotaSpec [core/v1]

Field	Description
`matchExpressions` ScopedResourceSelectorRequirement array	A list of scope selector requirements by scope of the resources.

ScopedResourceSelectorRequirement v1 core

Group	Version	Kind
`core`	`v1`	`ScopedResourceSelectorRequirement`

A scoped-resource selector requirement is a selector that contains values, a scope name, and an operator that relates the scope name and values.

Appears In:

ScopeSelector [core/v1]

Field	Description
`operator` string	Represents a scope's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist.
`scopeName` string	The name of the scope that the selector applies to.
`values` string array	An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

SeccompProfile v1 core

Group	Version	Kind
`core`	`v1`	`SeccompProfile`

SeccompProfile defines a pod/container's seccomp profile settings. Only one profile source may be set.

Appears In:

PodSecurityContext [core/v1]
SecurityContext [core/v1]

Field	Description
`localhostProfile` string	localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
`type` string	type indicates which kind of seccomp profile will be applied. Valid options are: Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

SecretEnvSource v1 core

Group	Version	Kind
`core`	`v1`	`SecretEnvSource`

SecretEnvSource selects a Secret to populate the environment variables with. The contents of the target Secret's Data field will represent the key-value pairs as environment variables.

Appears In:

EnvFromSource [core/v1]

Field	Description
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	Specify whether the Secret must be defined

SecretKeySelector v1 core

Group	Version	Kind
`core`	`v1`	`SecretKeySelector`

SecretKeySelector selects a key of a Secret.

Appears In:

EnvVarSource [core/v1]

Field	Description
`key` string	The key of the secret to select from. Must be a valid secret key.
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	Specify whether the Secret or its key must be defined

SecretProjection v1 core

Group	Version	Kind
`core`	`v1`	`SecretProjection`

Adapts a secret into a projected volume. The contents of the target Secret's Data field will be presented in a projected volume as files using the keys in the Data field as the file names. Note that this is identical to a secret volume source without the default mode.

Appears In:

VolumeProjection [core/v1]

Field	Description
`items` KeyToPath array	items if unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
`name` string	Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
`optional` boolean	optional field specify whether the Secret or its key must be defined

SecretReference v1 core

Group	Version	Kind
`core`	`v1`	`SecretReference`

SecretReference represents a Secret Reference. It has enough information to retrieve secret in any namespace

Appears In:

CSIPersistentVolumeSource [core/v1]
CephFSPersistentVolumeSource [core/v1]
CinderPersistentVolumeSource [core/v1]
FlexPersistentVolumeSource [core/v1]
ISCSIPersistentVolumeSource [core/v1]
RBDPersistentVolumeSource [core/v1]
ScaleIOPersistentVolumeSource [core/v1]

Field	Description
`name` string	name is unique within a namespace to reference a secret resource.
`namespace` string	namespace defines the space within which the secret name must be unique.

SecretVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`SecretVolumeSource`

Adapts a Secret into a volume. The contents of the target Secret's Data field will be presented in a volume as files using the keys in the Data field as the file names. Secret volumes support ownership management and SELinux relabeling.

Appears In:

Volume [core/v1]

Field	Description
`defaultMode` integer	defaultMode is Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
`items` KeyToPath array	items If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
`optional` boolean	optional field specify whether the Secret or its keys must be defined
`secretName` string	secretName is the name of the secret in the pod's namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

SecurityContext v1 core

Group	Version	Kind
`core`	`v1`	`SecurityContext`

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`allowPrivilegeEscalation` boolean	AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
`appArmorProfile` AppArmorProfile	appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
`capabilities` Capabilities	The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
`privileged` boolean	Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
`procMount` string	procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
`readOnlyRootFilesystem` boolean	Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
`runAsGroup` integer	The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
`runAsNonRoot` boolean	Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
`runAsUser` integer	The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
`seLinuxOptions` SELinuxOptions	The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
`seccompProfile` SeccompProfile	The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
`windowsOptions` WindowsSecurityContextOptions	The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.

SelectableField v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`SelectableField`

SelectableField specifies the JSON path of a field that may be used with field selectors.

Appears In:

CustomResourceDefinitionVersion [apiextensions/v1]

Field Description

jsonPath
string jsonPath is a simple JSON path which is evaluated against each custom resource to produce a field selector value. Only JSON paths without the array notation are allowed. Must point to a field of type string, boolean or integer. Types with enum values and strings with formats are allowed. If jsonPath refers to absent field in a resource, the jsonPath evaluates to an empty string. Must not point to metdata fields. Required.

ServerAddressByClientCIDR v1 meta

Group	Version	Kind
`meta`	`v1`	`ServerAddressByClientCIDR`

ServerAddressByClientCIDR helps the client to determine the server address that they should use, depending on the clientCIDR that they match.

Appears In:

APIGroup [meta/v1]
APIVersions [meta/v1]

Field	Description
`clientCIDR` string	The CIDR with which clients can match their IP to figure out the server address that they should use.
`serverAddress` string	Address of this server, suitable for a client that matches the above CIDR. This can be a hostname, hostname:port, IP or IP:port.

ServerStorageVersion v1alpha1 internal.apiserver.k8s.io

Group	Version	Kind
`internal.apiserver.k8s.io`	`v1alpha1`	`ServerStorageVersion`

An API server instance reports the version it can decode and the version it encodes objects to when persisting objects in the backend.

Appears In:

StorageVersionStatus [apiserverinternal/v1alpha1]

Field	Description
`apiServerID` string	The ID of the reporting API server.
`decodableVersions` string array	The API server can decode objects encoded in these versions. The encodingVersion must be included in the decodableVersions.
`encodingVersion` string	The API server encodes the object to this version when persisting it in the backend (e.g., etcd).
`servedVersions` string array	The API server can serve these versions. DecodableVersions must include all ServedVersions.

ServiceAccountSubject v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`ServiceAccountSubject`

ServiceAccountSubject holds detailed information for service-account-kind subject.

Appears In:

Subject [flowcontrol/v1]

Field	Description
`name` string	`name` is the name of matching ServiceAccount objects, or "*" to match regardless of name. Required.
`namespace` string	`namespace` is the namespace of matching ServiceAccount objects. Required.

ServiceAccountTokenProjection v1 core

Group	Version	Kind
`core`	`v1`	`ServiceAccountTokenProjection`

ServiceAccountTokenProjection represents a projected service account token volume. This projection can be used to insert a service account token into the pods runtime filesystem for use against APIs (Kubernetes API Server or otherwise).

Appears In:

VolumeProjection [core/v1]

Field	Description
`audience` string	audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver.
`expirationSeconds` integer	expirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes.
`path` string	path is the path relative to the mount point of the file to project the token into.

ServiceBackendPort v1 networking.k8s.io

Group	Version	Kind
`networking.k8s.io`	`v1`	`ServiceBackendPort`

ServiceBackendPort is the service port being referenced.

Appears In:

IngressServiceBackend [networking/v1]

Field	Description
`name` string	name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
`number` integer	number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".

ServicePort v1 core

Group	Version	Kind
`core`	`v1`	`ServicePort`

ServicePort contains information on service's port.

Appears In:

ServiceSpec [core/v1]

Field	Description
`appProtocol` string	The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
`name` string	The name of this port within the service. This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. When considering the endpoints for a Service, this must match the 'name' field in the EndpointPort. Optional if only one ServicePort is defined on this service.
`nodePort` integer	The port on each node on which this service is exposed when type is NodePort or LoadBalancer. Usually assigned by the system. If a value is specified, in-range, and not in use it will be used, otherwise the operation will fail. If not specified, a port will be allocated if this Service requires one. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type from NodePort to ClusterIP). More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
`port` integer	The port that will be exposed by this service.
`protocol` string	The IP protocol for this port. Supports "TCP", "UDP", and "SCTP". Default is TCP.
`targetPort`	Number or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-service

ServiceReference v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ServiceReference`

ServiceReference holds a reference to Service.legacy.k8s.io

Appears In:

WebhookClientConfig [admissionregistration/v1]

Field	Description
`name` string	`name` is the name of the service. Required
`namespace` string	`namespace` is the namespace of the service. Required
`path` string	`path` is an optional URL path which will be sent in any request to this service.
`port` integer	If specified, the port on the service that hosting webhook. Default to 443 for backward compatibility. `port` should be a valid port number (1-65535, inclusive).

SessionAffinityConfig v1 core

Group	Version	Kind
`core`	`v1`	`SessionAffinityConfig`

SessionAffinityConfig represents the configurations of session affinity.

Appears In:

ServiceSpec [core/v1]

Field	Description
`clientIP` ClientIPConfig	clientIP contains the configurations of Client IP based session affinity.

SleepAction v1 core

Group	Version	Kind
`core`	`v1`	`SleepAction`

SleepAction describes a "sleep" action.

Appears In:

LifecycleHandler [core/v1]

Field	Description
`seconds` integer	Seconds is the number of seconds to sleep.

StatefulSetCondition v1 apps

Group	Version	Kind
`apps`	`v1`	`StatefulSetCondition`

StatefulSetCondition describes the state of a statefulset at a certain point.

Appears In:

StatefulSetStatus [apps/v1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	A human readable message indicating details about the transition.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of statefulset condition.

StatefulSetOrdinals v1 apps

Group	Version	Kind
`apps`	`v1`	`StatefulSetOrdinals`

StatefulSetOrdinals describes the policy used for replica ordinal assignment in this StatefulSet.

Appears In:

StatefulSetSpec [apps/v1]

Field Description

start
integer start is the number representing the first replica's index. It may be used to number replicas from an alternate index (eg: 1-indexed) over the default 0-indexed names, or to orchestrate progressive movement of replicas from one StatefulSet to another. If set, replica indices will be in the range: [.spec.ordinals.start, .spec.ordinals.start + .spec.replicas). If unset, defaults to 0. Replica indices will be in the range: [0, .spec.replicas).

StatefulSetPersistentVolumeClaimRetentionPolicy v1 apps

Group	Version	Kind
`apps`	`v1`	`StatefulSetPersistentVolumeClaimRetentionPolicy`

StatefulSetPersistentVolumeClaimRetentionPolicy describes the policy used for PVCs created from the StatefulSet VolumeClaimTemplates.

Appears In:

StatefulSetSpec [apps/v1]

Field	Description
`whenDeleted` string	WhenDeleted specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is deleted. The default policy of `Retain` causes PVCs to not be affected by StatefulSet deletion. The `Delete` policy causes those PVCs to be deleted.
`whenScaled` string	WhenScaled specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is scaled down. The default policy of `Retain` causes PVCs to not be affected by a scaledown. The `Delete` policy causes the associated PVCs for any excess pods above the replica count to be deleted.

StatefulSetUpdateStrategy v1 apps

Group	Version	Kind
`apps`	`v1`	`StatefulSetUpdateStrategy`

StatefulSetUpdateStrategy indicates the strategy that the StatefulSet controller will use to perform updates. It includes any additional parameters necessary to perform the update for the indicated strategy.

Appears In:

StatefulSetSpec [apps/v1]

Field	Description
`rollingUpdate` RollingUpdateStatefulSetStrategy	RollingUpdate is used to communicate parameters when Type is RollingUpdateStatefulSetStrategyType.
`type` string	Type indicates the type of the StatefulSetUpdateStrategy. Default is RollingUpdate.

Status v1 meta

Group	Version	Kind
`meta`	`v1`	`Status`

Status is a return value for calls that don't return other objects.

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`code` integer	Suggested HTTP return code for this status, 0 if not set.
`details` StatusDetails	Extended data associated with the reason. Each reason may define its own extended details. This field is optional and the data returned is not guaranteed to conform to any schema except that defined by the reason type.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`message` string	A human-readable description of the status of this operation.
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`reason` string	A machine-readable description of why this operation is in the "Failure" status. If this value is empty there is no information available. A Reason clarifies an HTTP status code but does not override it.
`status` string	Status of the operation. One of: "Success" or "Failure". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

StatusCause v1 meta

Group	Version	Kind
`meta`	`v1`	`StatusCause`

StatusCause provides more information about an api.Status failure, including cases when multiple errors are encountered.

Appears In:

StatusDetails [meta/v1]

Field	Description
`field` string	The field of the resource that has caused this error, as named by its JSON serialization. May include dot and postfix notation for nested attributes. Arrays are zero-indexed. Fields may appear more than once in an array of causes due to fields having multiple errors. Optional. Examples: "name" - the field "name" on the current resource "items[0].name" - the field "name" on the first array entry in "items"
`message` string	A human-readable description of the cause of the error. This field may be presented as-is to a reader.
`reason` string	A machine-readable description of the cause of the error. If this value is empty there is no information available.

StatusDetails v1 meta

Group	Version	Kind
`meta`	`v1`	`StatusDetails`

StatusDetails is a set of additional properties that MAY be set by the server to provide additional information about a response. The Reason field of a Status object defines what attributes will be set. Clients must ignore fields that do not match the defined type of each attribute, and should assume that any attribute may be empty, invalid, or under defined.

Appears In:

Status [meta/v1]

Field	Description
`causes` StatusCause array	The Causes array includes more details associated with the StatusReason failure. Not all StatusReasons may provide detailed causes.
`group` string	The group attribute of the resource associated with the status StatusReason.
`kind` string	The kind attribute of the resource associated with the status StatusReason. On some operations may differ from the requested resource Kind. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	The name attribute of the resource associated with the status StatusReason (when there is a single name which can be described).
`retryAfterSeconds` integer	If specified, the time in seconds before the operation should be retried. Some errors may indicate the client must take an alternate action - for those errors this field may indicate how long to wait before taking the alternate action.
`uid` string	UID of the resource. (when there is a single resource which can be described). More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

StorageOSPersistentVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`StorageOSPersistentVolumeSource`

Represents a StorageOS persistent volume resource.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` ObjectReference	secretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted.
`volumeName` string	volumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace.
`volumeNamespace` string	volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.

StorageOSVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`StorageOSVolumeSource`

Represents a StorageOS persistent volume resource.

Appears In:

Volume [core/v1]

Field	Description
`fsType` string	fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`readOnly` boolean	readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
`secretRef` LocalObjectReference	secretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted.
`volumeName` string	volumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace.
`volumeNamespace` string	volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.

StorageVersionCondition v1alpha1 internal.apiserver.k8s.io

Group	Version	Kind
`internal.apiserver.k8s.io`	`v1alpha1`	`StorageVersionCondition`

Describes the state of the storageVersion at a certain point.

Appears In:

StorageVersionStatus [apiserverinternal/v1alpha1]

Field	Description
`lastTransitionTime` Time	Last time the condition transitioned from one status to another.
`message` string	A human readable message indicating details about the transition.
`observedGeneration` integer	If set, this represents the .metadata.generation that the condition was set based upon.
`reason` string	The reason for the condition's last transition.
`status` string	Status of the condition, one of True, False, Unknown.
`type` string	Type of the condition.

Subject v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`Subject`

Subject matches the originator of a request, as identified by the request authentication system. There are three ways of matching an originator; by user, group, or service account.

Appears In:

PolicyRulesWithSubjects [flowcontrol/v1]

Field	Description
`group` GroupSubject	`group` matches based on user group name.
`kind` string	`kind` indicates which one of the other fields is non-empty. Required
`serviceAccount` ServiceAccountSubject	`serviceAccount` matches ServiceAccounts.
`user` UserSubject	`user` matches based on username.

SubjectRulesReviewStatus v1 authorization.k8s.io

Group	Version	Kind
`authorization.k8s.io`	`v1`	`SubjectRulesReviewStatus`

SubjectRulesReviewStatus contains the result of a rules check. This check can be incomplete depending on the set of authorizers the server is configured with and any errors experienced during evaluation. Because authorization rules are additive, if a rule appears in a list it's safe to assume the subject has that permission, even if that list is incomplete.

Appears In:

SelfSubjectRulesReview [authorization/v1]

Field	Description
`evaluationError` string	EvaluationError can appear in combination with Rules. It indicates an error occurred during rule evaluation, such as an authorizer that doesn't support rule evaluation, and that ResourceRules and/or NonResourceRules may be incomplete.
`incomplete` boolean	Incomplete is true when the rules returned by this call are incomplete. This is most commonly encountered when an authorizer, such as an external authorizer, doesn't support rules evaluation.
`nonResourceRules` NonResourceRule array	NonResourceRules is the list of actions the subject is allowed to perform on non-resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.
`resourceRules` ResourceRule array	ResourceRules is the list of actions the subject is allowed to perform on resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.

SuccessPolicy v1 batch

Group	Version	Kind
`batch`	`v1`	`SuccessPolicy`

SuccessPolicy describes when a Job can be declared as succeeded based on the success of some indexes.

Appears In:

JobSpec [batch/v1]

Field Description

rules
SuccessPolicyRule array rules represents the list of alternative rules for the declaring the Jobs as successful before `.status.succeeded >= .spec.completions`. Once any of the rules are met, the "SucceededCriteriaMet" condition is added, and the lingering pods are removed. The terminal state for such a Job has the "Complete" condition. Additionally, these rules are evaluated in order; Once the Job meets one of the rules, other rules are ignored. At most 20 elements are allowed.

SuccessPolicyRule v1 batch

Group	Version	Kind
`batch`	`v1`	`SuccessPolicyRule`

SuccessPolicyRule describes rule for declaring a Job as succeeded. Each rule must have at least one of the "succeededIndexes" or "succeededCount" specified.

Appears In:

SuccessPolicy [batch/v1]

Field Description

succeededCount
integer succeededCount specifies the minimal required size of the actual set of the succeeded indexes for the Job. When succeededCount is used along with succeededIndexes, the check is constrained only to the set of indexes specified by succeededIndexes. For example, given that succeededIndexes is "1-4", succeededCount is "3", and completed indexes are "1", "3", and "5", the Job isn't declared as succeeded because only "1" and "3" indexes are considered in that rules. When this field is null, this doesn't default to any value and is never evaluated at any time. When specified it needs to be a positive integer.

succeededIndexes
string succeededIndexes specifies the set of indexes which need to be contained in the actual set of the succeeded indexes for the Job. The list of indexes must be within 0 to ".spec.completions-1" and must not contain duplicates. At least one element is required. The indexes are represented as intervals separated by commas. The intervals can be a decimal integer or a pair of decimal integers separated by a hyphen. The number are listed in represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". When this field is null, this field doesn't default to any value and is never evaluated at any time.

Sysctl v1 core

Group	Version	Kind
`core`	`v1`	`Sysctl`

Sysctl defines a kernel parameter to be set

Appears In:

PodSecurityContext [core/v1]

Field	Description
`name` string	Name of a property to set
`value` string	Value of a property to set

TCPSocketAction v1 core

Group	Version	Kind
`core`	`v1`	`TCPSocketAction`

TCPSocketAction describes an action based on opening a socket

Appears In:

LifecycleHandler [core/v1]
Probe [core/v1]

Field	Description
`host` string	Optional: Host name to connect to, defaults to the pod IP.
`port`	Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Taint v1 core

Group	Version	Kind
`core`	`v1`	`Taint`

The node this Taint is attached to has the "effect" on any pod that does not tolerate the Taint.

Appears In:

NodeSpec [core/v1]

Field	Description
`effect` string	Required. The effect of the taint on pods that do not tolerate the taint. Valid effects are NoSchedule, PreferNoSchedule and NoExecute.
`key` string	Required. The taint key to be applied to a node.
`timeAdded` Time	TimeAdded represents the time at which the taint was added. It is only written for NoExecute taints.
`value` string	The taint value corresponding to the taint key.

Time v1 meta

Group	Version	Kind
`meta`	`v1`	`Time`

Time is a wrapper around time.Time which supports correct marshaling to YAML and JSON. Wrappers are provided for many of the factory methods that the time package offers.

Appears In:

APIServiceCondition [apiregistration/v1]
CertificateSigningRequestCondition [certificates/v1]
Condition [meta/v1]
ContainerStateRunning [core/v1]
ContainerStateTerminated [core/v1]
CronJobStatus [batch/v1]
CustomResourceDefinitionCondition [apiextensions/v1]
DaemonSetCondition [apps/v1]
DeploymentCondition [apps/v1]
Event [core/v1]
Event [events/v1]
FlowSchemaCondition [flowcontrol/v1]
HorizontalPodAutoscalerCondition [autoscaling/v2]
HorizontalPodAutoscalerStatus [autoscaling/v2]
HorizontalPodAutoscalerStatus [autoscaling/v1]
JobCondition [batch/v1]
JobStatus [batch/v1]
ManagedFieldsEntry [meta/v1]
MigrationCondition [storagemigration/v1alpha1]
NamespaceCondition [core/v1]
NodeCondition [core/v1]
ObjectMeta [meta/v1]
PersistentVolumeClaimCondition [core/v1]
PersistentVolumeStatus [core/v1]
PodCondition [core/v1]
PodDisruptionBudgetStatus [policy/v1]
PodStatus [core/v1]
PriorityLevelConfigurationCondition [flowcontrol/v1]
ReplicaSetCondition [apps/v1]
ReplicationControllerCondition [core/v1]
StatefulSetCondition [apps/v1]
StorageVersionCondition [apiserverinternal/v1alpha1]
Taint [core/v1]
TokenRequestStatus [authentication/v1]
VolumeError [storage/v1]

Field	Description

Toleration v1 core

Group	Version	Kind
`core`	`v1`	`Toleration`

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

Appears In:

PodSpec [core/v1]
Scheduling [node/v1]

Field	Description
`effect` string	Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.
`key` string	Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.
`operator` string	Operator represents a key's relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.
`tolerationSeconds` integer	TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.
`value` string	Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.

TopologySelectorLabelRequirement v1 core

Group	Version	Kind
`core`	`v1`	`TopologySelectorLabelRequirement`

A topology selector requirement is a selector that matches given label. This is an alpha feature and may change in the future.

Appears In:

TopologySelectorTerm [core/v1]

Field	Description
`key` string	The label key that the selector applies to.
`values` string array	An array of string values. One value must match the label to be selected. Each entry in Values is ORed.

TopologySelectorTerm v1 core

Group	Version	Kind
`core`	`v1`	`TopologySelectorTerm`

A topology selector term represents the result of label queries. A null or empty topology selector term matches no objects. The requirements of them are ANDed. It provides a subset of functionality as NodeSelectorTerm. This is an alpha feature and may change in the future.

Appears In:

StorageClass [storage/v1]

Field	Description
`matchLabelExpressions` TopologySelectorLabelRequirement array	A list of topology selector requirements by labels.

TopologySpreadConstraint v1 core

Group	Version	Kind
`core`	`v1`	`TopologySpreadConstraint`

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

Appears In:

PodSpec [core/v1]

Field	Description
`labelSelector` LabelSelector	LabelSelector is used to find matching pods. Pods that match this label selector are counted to determine the number of pods in their corresponding topology domain.
`matchLabelKeys` string array	MatchLabelKeys is a set of pod label keys to select the pods over which spreading will be calculated. The keys are used to lookup values from the incoming pod labels, those key-value labels are ANDed with labelSelector to select the group of existing pods over which spreading will be calculated for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. MatchLabelKeys cannot be set when LabelSelector isn't set. Keys that don't exist in the incoming pod labels will be ignored. A null or empty list means only match against labelSelector. This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default).
`maxSkew` integer	MaxSkew describes the degree to which pods may be unevenly distributed. When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference between the number of matching pods in the target topology and the global minimum. The global minimum is the minimum number of matching pods in an eligible domain or zero if the number of eligible domains is less than MinDomains. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 2/2/1: In this case, the global minimum is 1. \| zone1 \| zone2 \| zone3 \| \| P P \| P P \| P \| - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) violate MaxSkew(1). - if MaxSkew is 2, incoming pod can be scheduled onto any zone. When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence to topologies that satisfy it. It's a required field. Default value is 1 and 0 is not allowed.
`minDomains` integer	MinDomains indicates a minimum number of eligible domains. When the number of eligible domains with matching topology keys is less than minDomains, Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. And when the number of eligible domains with matching topology keys equals or greater than minDomains, this value has no effect on scheduling. As a result, when the number of eligible domains is less than minDomains, scheduler won't schedule more than maxSkew Pods to those domains. If value is nil, the constraint behaves as if MinDomains is equal to 1. Valid values are integers greater than 0. When value is not nil, WhenUnsatisfiable must be DoNotSchedule. For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same labelSelector spread as 2/2/2: \| zone1 \| zone2 \| zone3 \| \| P P \| P P \| P P \| The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. In this situation, new pod with the same labelSelector cannot be scheduled, because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, it will violate MaxSkew.
`nodeAffinityPolicy` string	NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector when calculating pod topology spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. If this value is nil, the behavior is equivalent to the Honor policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.
`nodeTaintsPolicy` string	NodeTaintsPolicy indicates how we will treat node taints when calculating pod topology spread skew. Options are: - Honor: nodes without taints, along with tainted nodes for which the incoming pod has a toleration, are included. - Ignore: node taints are ignored. All nodes are included. If this value is nil, the behavior is equivalent to the Ignore policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.
`topologyKey` string	TopologyKey is the key of node labels. Nodes that have a label with this key and identical values are considered to be in the same topology. We consider each <key, value> as a "bucket", and try to put balanced number of pods into each bucket. We define a domain as a particular instance of a topology. Also, we define an eligible domain as a domain whose nodes meet the requirements of nodeAffinityPolicy and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. It's a required field.
`whenUnsatisfiable` string	WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy the spread constraint. - DoNotSchedule (default) tells the scheduler not to schedule it. - ScheduleAnyway tells the scheduler to schedule the pod in any location, but giving higher precedence to topologies that would help reduce the skew. A constraint is considered "Unsatisfiable" for an incoming pod if and only if every possible node assignment for that pod would violate "MaxSkew" on some topology. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 3/1/1: \| zone1 \| zone2 \| zone3 \| \| P P P \| P \| P \| If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler won't make it more imbalanced. It's a required field.

TypeChecking v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`TypeChecking`

TypeChecking contains results of type checking the expressions in the ValidatingAdmissionPolicy

Other API versions of this object exist: v1beta1

Appears In:

ValidatingAdmissionPolicyStatus [admissionregistration/v1]

Field	Description
`expressionWarnings` ExpressionWarning array	The type checking warnings for each expression.

TypedLocalObjectReference v1 core

Group	Version	Kind
`core`	`v1`	`TypedLocalObjectReference`

TypedLocalObjectReference contains enough information to let you locate the typed referenced object inside the same namespace.

Appears In:

IngressBackend [networking/v1]
PersistentVolumeClaimSpec [core/v1]

Field	Description
`apiGroup` string	APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
`kind` string	Kind is the type of resource being referenced
`name` string	Name is the name of resource being referenced

TypedObjectReference v1 core

Group	Version	Kind
`core`	`v1`	`TypedObjectReference`

TypedObjectReference contains enough information to let you locate the typed referenced object

Appears In:

PersistentVolumeClaimSpec [core/v1]

Field	Description
`apiGroup` string	APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
`kind` string	Kind is the type of resource being referenced
`name` string	Name is the name of resource being referenced
`namespace` string	Namespace is the namespace of resource being referenced Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled.

UncountedTerminatedPods v1 batch

Group	Version	Kind
`batch`	`v1`	`UncountedTerminatedPods`

UncountedTerminatedPods holds UIDs of Pods that have terminated but haven't been accounted in Job status counters.

Appears In:

JobStatus [batch/v1]

Field	Description
`failed` string array	failed holds UIDs of failed Pods.
`succeeded` string array	succeeded holds UIDs of succeeded Pods.

UserInfo v1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1`	`UserInfo`

UserInfo holds the information about the user needed to implement the user.Info interface.

Appears In:

SelfSubjectReviewStatus [authentication/v1]
SelfSubjectReviewStatus [authentication/v1beta1]
TokenReviewStatus [authentication/v1]

Field	Description
`extra` object	Any additional information provided by the authenticator.
`groups` string array	The names of groups this user is a part of.
`uid` string	A unique value that identifies this user across time. If this user is deleted and another user by the same name is added, they will have different UIDs.
`username` string	The name that uniquely identifies this user among all active users.

UserSubject v1 flowcontrol.apiserver.k8s.io

Group	Version	Kind
`flowcontrol.apiserver.k8s.io`	`v1`	`UserSubject`

UserSubject holds detailed information for user-kind subject.

Appears In:

Subject [flowcontrol/v1]

Field	Description
`name` string	`name` is the username that matches, or "*" to match all usernames. Required.

ValidatingWebhook v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`ValidatingWebhook`

ValidatingWebhook describes an admission webhook and the resources and operations it applies to.

Appears In:

ValidatingWebhookConfiguration [admissionregistration/v1]

Field	Description
`admissionReviewVersions` string array	AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
`clientConfig` WebhookClientConfig	ClientConfig defines how to communicate with the hook. Required
`failurePolicy` string	FailurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
`matchConditions` MatchCondition array patch strategy: merge patch merge key: name	MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the webhook is skipped. 2. If ALL matchConditions evaluate to TRUE, the webhook is called. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
`matchPolicy` string	matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Equivalent"
`name` string	The name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where "imagepolicy" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
`namespaceSelector` LabelSelector	NamespaceSelector decides whether to run the webhook on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the webhook. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the webhook on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
`objectSelector` LabelSelector	ObjectSelector decides whether to run the webhook based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the webhook, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
`rules` RuleWithOperations array	Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
`sideEffects` string	SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
`timeoutSeconds` integer	TimeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.

Validation v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`Validation`

Validation specifies the CEL expression which is used to apply the validation.

Other API versions of this object exist: v1beta1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1]

Field	Description
`expression` string	Expression represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec CEL expressions have access to the contents of the API request/response, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"} - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"} - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"} Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. Required.
`message` string	Message represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".
`messageExpression` string	messageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a validation, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the `expression` except for 'authorizer' and 'authorizer.requestResource'. Example: "object.x must be less than max ("+string(params.max)+")"
`reason` string	Reason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.

ValidationRule v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`ValidationRule`

ValidationRule describes a validation rule written in the CEL expression language.

Appears In:

JSONSchemaProps [apiextensions/v1]

Field	Description
`fieldPath` string	fieldPath represents the field path returned when the validation fails. It must be a relative JSON path (i.e. with array notation) scoped to the location of this x-kubernetes-validations extension in the schema and refer to an existing field. e.g. when validation checks if a specific attribute `foo` under a map `testMap`, the fieldPath could be set to `.testMap.foo` If the validation checks two lists must have unique attributes, the fieldPath could be set to either of the list: e.g. `.testList` It does not support list numeric index. It supports child operation to refer to an existing field currently. Refer to [JSONPath support in Kubernetes](https://kubernetes.io/docs/reference/kubectl/jsonpath/) for more info. Numeric index of array is not supported. For field name which contains special characters, use `['specialName']` to refer the field name. e.g. for attribute `foo.34$` appears in a list `testList`, the fieldPath could be set to `.testList['foo.34$']`
`message` string	Message represents the message displayed when validation fails. The message is required if the Rule contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host"
`messageExpression` string	MessageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a rule, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the rule; the only difference is the return type. Example: "x must be less than max ("+string(self.max)+")"
`optionalOldSelf` boolean	optionalOldSelf is used to opt a transition rule into evaluation even when the object is first created, or if the old object is missing the value. When enabled `oldSelf` will be a CEL optional whose value will be `None` if there is no old value, or when the object is initially created. You may check for presence of oldSelf using `oldSelf.hasValue()` and unwrap it after checking using `oldSelf.value()`. Check the CEL documentation for Optional types for more information: https://pkg.go.dev/github.com/google/cel-go/cel#OptionalTypes May not be set unless `oldSelf` is used in `rule`.
`reason` string	reason provides a machine-readable validation failure reason that is returned to the caller when a request fails this validation rule. The HTTP status code returned to the caller will match the reason of the reason of the first failed validation rule. The currently supported reasons are: "FieldValueInvalid", "FieldValueForbidden", "FieldValueRequired", "FieldValueDuplicate". If not set, default to use "FieldValueInvalid". All future added reasons must be accepted by clients when reading this value and unknown reasons should be treated as FieldValueInvalid.
`rule` string	Rule represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec The Rule is scoped to the location of the x-kubernetes-validations extension in the schema. The `self` variable in the CEL expression is bound to the scoped value. Example: - Rule scoped to the root of a resource with a status subresource: {"rule": "self.status.actual <= self.spec.maxDesired"} If the Rule is scoped to an object with properties, the accessible properties of the object are field selectable via `self.field` and field presence can be checked via `has(self.field)`. Null valued fields are treated as absent fields in CEL expressions. If the Rule is scoped to an object with additionalProperties (i.e. a map) the value of the map are accessible via `self[mapKey]`, map containment can be checked via `mapKey in self` and all entries of the map are accessible via CEL macros and functions such as `self.all(...)`. If the Rule is scoped to an array, the elements of the array are accessible via `self[i]` and also by macros and functions. If the Rule is scoped to a scalar, `self` is bound to the scalar value. Examples: - Rule scoped to a map of objects: {"rule": "self.components['Widget'].priority < 10"} - Rule scoped to a list of integers: {"rule": "self.values.all(value, value >= 0 && value < 100)"} - Rule scoped to a string value: {"rule": "self.startsWith('kube')"} The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object and from any x-kubernetes-embedded-resource annotated objects. No other metadata properties are accessible. Unknown data preserved in custom resources via x-kubernetes-preserve-unknown-fields is not accessible in CEL expressions. This includes: - Unknown field values that are preserved by object schemas with x-kubernetes-preserve-unknown-fields. - Object properties where the property schema is of an "unknown type". An "unknown type" is recursively defined as: - A schema with no type and x-kubernetes-preserve-unknown-fields set to true - An array where the items schema is of an "unknown type" - An object where the additionalProperties schema is of an "unknown type" Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Rule accessing a property named "namespace": {"rule": "self.__namespace__ > 0"} - Rule accessing a property named "x-prop": {"rule": "self.x__dash__prop > 0"} - Rule accessing a property named "redact__d": {"rule": "self.redact__underscores__d > 0"} Equality on arrays with x-kubernetes-list-type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. If `rule` makes use of the `oldSelf` variable it is implicitly a `transition rule`. By default, the `oldSelf` variable is the same type as `self`. When `optionalOldSelf` is true, the `oldSelf` variable is a CEL optional variable whose value() is the same type as `self`. See the documentation for the `optionalOldSelf` field for details. Transition rules by default are applied only on UPDATE requests and are skipped if an old value could not be found. You can opt a transition rule into unconditional evaluation by setting `optionalOldSelf` to true.

Variable v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`Variable`

Variable is the definition of a variable that is used for composition. A variable is defined as a named expression.

Other API versions of this object exist: v1beta1 v1alpha1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1]

Field	Description
`expression` string	Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
`name` string	Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

VolumeAttachmentSource v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`VolumeAttachmentSource`

VolumeAttachmentSource represents a volume that should be attached. Right now only PersistentVolumes can be attached via external attacher, in the future we may allow also inline volumes in pods. Exactly one member can be set.

Appears In:

VolumeAttachmentSpec [storage/v1]

Field	Description
`inlineVolumeSpec` PersistentVolumeSpec	inlineVolumeSpec contains all the information necessary to attach a persistent volume defined by a pod's inline VolumeSource. This field is populated only for the CSIMigration feature. It contains translated fields from a pod's inline VolumeSource to a PersistentVolumeSpec. This field is beta-level and is only honored by servers that enabled the CSIMigration feature.
`persistentVolumeName` string	persistentVolumeName represents the name of the persistent volume to attach.

VolumeDevice v1 core

Group	Version	Kind
`core`	`v1`	`VolumeDevice`

volumeDevice describes a mapping of a raw block device within a container.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`devicePath` string	devicePath is the path inside of the container that the device will be mapped to.
`name` string	name must match the name of a persistentVolumeClaim in the pod

VolumeError v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`VolumeError`

VolumeError captures an error encountered during a volume operation.

Appears In:

VolumeAttachmentStatus [storage/v1]

Field	Description
`message` string	message represents the error encountered during Attach or Detach operation. This string may be logged, so it should not contain sensitive information.
`time` Time	time represents the time the error was encountered.

VolumeMount v1 core

Group	Version	Kind
`core`	`v1`	`VolumeMount`

VolumeMount describes a mounting of a Volume within a container.

Appears In:

Container [core/v1]
EphemeralContainer [core/v1]

Field	Description
`mountPath` string	Path within the container at which the volume should be mounted. Must not contain ':'.
`mountPropagation` string	mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
`name` string	This must match the Name of a Volume.
`readOnly` boolean	Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
`recursiveReadOnly` string	RecursiveReadOnly specifies whether read-only mounts should be handled recursively. If ReadOnly is false, this field has no meaning and must be unspecified. If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason. If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None). If this field is not specified, it is treated as an equivalent of Disabled.
`subPath` string	Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
`subPathExpr` string	Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.

VolumeNodeAffinity v1 core

Group	Version	Kind
`core`	`v1`	`VolumeNodeAffinity`

VolumeNodeAffinity defines constraints that limit what nodes this volume can be accessed from.

Appears In:

PersistentVolumeSpec [core/v1]

Field	Description
`required` NodeSelector	required specifies hard node constraints that must be met.

VolumeNodeResources v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`VolumeNodeResources`

VolumeNodeResources is a set of resource limits for scheduling of volumes.

Appears In:

CSINodeDriver [storage/v1]

Field	Description
`count` integer	count indicates the maximum number of unique volumes managed by the CSI driver that can be used on a node. A volume that is both attached and mounted on a node is considered to be used once, not twice. The same rule applies for a unique volume that is shared among multiple pods on the same node. If this field is not specified, then the supported number of volumes on this node is unbounded.

VolumeProjection v1 core

Group	Version	Kind
`core`	`v1`	`VolumeProjection`

Projection that may be projected along with other supported volume types. Exactly one of these fields must be set.

Appears In:

ProjectedVolumeSource [core/v1]

Field	Description
`clusterTrustBundle` ClusterTrustBundleProjection	ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field of ClusterTrustBundle objects in an auto-updating file. Alpha, gated by the ClusterTrustBundleProjection feature gate. ClusterTrustBundle objects can either be selected by name, or by the combination of signer name and a label selector. Kubelet performs aggressive normalization of the PEM contents written into the pod filesystem. Esoteric PEM features such as inter-block comments and block headers are stripped. Certificates are deduplicated. The ordering of certificates within the file is arbitrary, and Kubelet may change the order over time.
`configMap` ConfigMapProjection	configMap information about the configMap data to project
`downwardAPI` DownwardAPIProjection	downwardAPI information about the downwardAPI data to project
`secret` SecretProjection	secret information about the secret data to project
`serviceAccountToken` ServiceAccountTokenProjection	serviceAccountToken is information about the serviceAccountToken data to project

VolumeResourceRequirements v1 core

Group	Version	Kind
`core`	`v1`	`VolumeResourceRequirements`

VolumeResourceRequirements describes the storage resource requirements for a volume.

Appears In:

PersistentVolumeClaimSpec [core/v1]

Field	Description
`limits` object	Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
`requests` object	Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

VsphereVirtualDiskVolumeSource v1 core

Group	Version	Kind
`core`	`v1`	`VsphereVirtualDiskVolumeSource`

Represents a vSphere volume resource.

Appears In:

PersistentVolumeSpec [core/v1]
Volume [core/v1]

Field	Description
`fsType` string	fsType is filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
`storagePolicyID` string	storagePolicyID is the storage Policy Based Management (SPBM) profile ID associated with the StoragePolicyName.
`storagePolicyName` string	storagePolicyName is the storage Policy Based Management (SPBM) profile name.
`volumePath` string	volumePath is the path that identifies vSphere volume vmdk

WatchEvent v1 meta

Group	Version	Kind
`meta`	`v1`	`WatchEvent`

Event represents a single event to a watched resource.

Field	Description
`object`	Object is: * If Type is Added or Modified: the new state of the object. * If Type is Deleted: the state of the object immediately before deletion. * If Type is Error: *Status is recommended; other types may make sense depending on context.
`type` string

WebhookClientConfig v1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1`	`WebhookClientConfig`

WebhookClientConfig contains the information to make a TLS connection with the webhook

Appears In:

MutatingWebhook [admissionregistration/v1]
ValidatingWebhook [admissionregistration/v1]

Field	Description
`caBundle` string	`caBundle` is a PEM encoded CA bundle which will be used to validate the webhook's server certificate. If unspecified, system trust roots on the apiserver are used.
`service` ServiceReference	`service` is a reference to the service for this webhook. Either `service` or `url` must be specified. If the webhook is running within the cluster, then you should use `service`.
`url` string	`url` gives the location of the webhook, in standard URL form (`scheme://host:port/path`). Exactly one of `url` or `service` must be specified. The `host` should not refer to a service running in the cluster; use the `service` field instead. The host might be resolved via external DNS in some apiservers (e.g., `kube-apiserver` cannot resolve in-cluster DNS as that would be a layering violation). `host` may also be an IP address. Please note that using `localhost` or `127.0.0.1` as a `host` is risky unless you take great care to run this webhook on all hosts which run an apiserver which might need to make calls to this webhook. Such installs are likely to be non-portable, i.e., not easy to turn up in a new cluster. The scheme must be "https"; the URL must begin with "https://". A path is optional, and if present may be any string permissible in a URL. You may use the path to pass an arbitrary string to the webhook, for example, a cluster identifier. Attempting to use a user or basic auth e.g. "user:password@" is not allowed. Fragments ("#...") and query parameters ("?...") are not allowed, either.

WebhookConversion v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`WebhookConversion`

WebhookConversion describes how to call a conversion webhook

Appears In:

CustomResourceConversion [apiextensions/v1]

Field Description

clientConfig
WebhookClientConfig clientConfig is the instructions for how to call the webhook if strategy is `Webhook`.

conversionReviewVersions
string array conversionReviewVersions is an ordered list of preferred `ConversionReview` versions the Webhook expects. The API server will use the first version in the list which it supports. If none of the versions specified in this list are supported by API server, conversion will fail for the custom resource. If a persisted Webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail.

WeightedPodAffinityTerm v1 core

Group	Version	Kind
`core`	`v1`	`WeightedPodAffinityTerm`

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

Appears In:

PodAffinity [core/v1]
PodAntiAffinity [core/v1]

Field	Description
`podAffinityTerm` PodAffinityTerm	Required. A pod affinity term, associated with the corresponding weight.
`weight` integer	weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

WindowsSecurityContextOptions v1 core

Group	Version	Kind
`core`	`v1`	`WindowsSecurityContextOptions`

WindowsSecurityContextOptions contain Windows-specific options and credentials.

Appears In:

PodSecurityContext [core/v1]
SecurityContext [core/v1]

Field	Description
`gmsaCredentialSpec` string	GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
`gmsaCredentialSpecName` string	GMSACredentialSpecName is the name of the GMSA credential spec to use.
`hostProcess` boolean	HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
`runAsUserName` string	The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

Old API Versions

This section contains older versions of resources shown above.

AllocatedDeviceStatus v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`AllocatedDeviceStatus`

Other API versions of this object exist: v1beta1

Appears In:

ResourceClaimStatus [resource/v1alpha3]

Field	Description
`conditions` Condition array	Conditions contains the latest observation of the device's state. If the device has been configured according to the class and claim config references, the `Ready` condition should be True.
`data`	Data contains arbitrary driver-specific data. The length of the raw data must be smaller or equal to 10 Ki.
`device` string	Device references one device instance via its name in the driver's resource pool. It must be a DNS label.
`driver` string	Driver specifies the name of the DRA driver whose kubelet plugin should be invoked to process the allocation once the claim is needed on a node. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`networkData` NetworkDeviceData	NetworkData contains network-related information specific to the device.
`pool` string	This name together with the driver name and the device name field identify which device was allocated (`<driver name>/<pool name>/<device name>`). Must not be longer than 253 characters and may contain one or more DNS sub-domains separated by slashes.

AllocationResult v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`AllocationResult`

Other API versions of this object exist: v1beta1

Appears In:

ResourceClaimStatus [resource/v1alpha3]

Field	Description
`devices` DeviceAllocationResult	Devices is the result of allocating devices.
`nodeSelector` NodeSelector	NodeSelector defines where the allocated resources are available. If unset, they are available everywhere.

AuditAnnotation v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`AuditAnnotation`

Other API versions of this object exist: v1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field Description

BasicDevice v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`BasicDevice`

Other API versions of this object exist: v1beta1

Appears In:

Device [resource/v1alpha3]

Field	Description
`attributes` object	Attributes defines the set of attributes for this device. The name of each attribute must be unique in that set. The maximum number of attributes and capacities combined is 32.
`capacity` object	Capacity defines the set of capacities for this device. The name of each capacity must be unique in that set. The maximum number of attributes and capacities combined is 32.

CELDeviceSelector v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`CELDeviceSelector`

Other API versions of this object exist: v1beta1

Appears In:

DeviceSelector [resource/v1alpha3]

Field Description

CrossVersionObjectReference v1 autoscaling

Group	Version	Kind
`autoscaling`	`v1`	`CrossVersionObjectReference`

Other API versions of this object exist: v2

Appears In:

HorizontalPodAutoscalerSpec [autoscaling/v1]

Field	Description
`apiVersion` string	apiVersion is the API version of the referent
`kind` string	kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`name` string	name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

Device v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`Device`

Other API versions of this object exist: v1beta1

Appears In:

ResourceSliceSpec [resource/v1alpha3]

Field	Description
`basic` BasicDevice	Basic defines one device instance.
`name` string	Name is unique identifier among all devices managed by the driver in the pool. It must be a DNS label.

DeviceAllocationConfiguration v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceAllocationConfiguration`

Other API versions of this object exist: v1beta1

Appears In:

DeviceAllocationResult [resource/v1alpha3]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.
`requests` string array	Requests lists the names of requests where the configuration applies. If empty, its applies to all requests.
`source` string	Source records whether the configuration comes from a class and thus is not something that a normal user would have been able to set or from a claim.

DeviceAllocationResult v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceAllocationResult`

Other API versions of this object exist: v1beta1

Appears In:

AllocationResult [resource/v1alpha3]

Field	Description
`config` DeviceAllocationConfiguration array	This field is a combination of all the claim and class configuration parameters. Drivers can distinguish between those based on a flag. This includes configuration parameters for drivers which have no allocated devices in the result because it is up to the drivers which configuration parameters they support. They can silently ignore unknown configuration parameters.
`results` DeviceRequestAllocationResult array	Results lists all allocated devices.

DeviceAttribute v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceAttribute`

Other API versions of this object exist: v1beta1

Appears In:

BasicDevice [resource/v1alpha3]

Field	Description
`bool` boolean	BoolValue is a true/false value.
`int` integer	IntValue is a number.
`string` string	StringValue is a string. Must not be longer than 64 characters.
`version` string	VersionValue is a semantic version according to semver.org spec 2.0.0. Must not be longer than 64 characters.

DeviceClaim v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceClaim`

Other API versions of this object exist: v1beta1

Appears In:

ResourceClaimSpec [resource/v1alpha3]

Field	Description
`config` DeviceClaimConfiguration array	This field holds configuration for multiple potential drivers which could satisfy requests in this claim. It is ignored while allocating the claim.
`constraints` DeviceConstraint array	These constraints must be satisfied by the set of devices that get allocated for the claim.
`requests` DeviceRequest array	Requests represent individual requests for distinct devices which must all be satisfied. If empty, nothing needs to be allocated.

DeviceClaimConfiguration v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceClaimConfiguration`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClaim [resource/v1alpha3]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.
`requests` string array	Requests lists the names of requests where the configuration applies. If empty, it applies to all requests.

DeviceClass v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceClass`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClassList [resource/v1alpha3]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` DeviceClassSpec	Spec defines what can be allocated and how to configure it. This is mutable. Consumers have to be prepared for classes changing at any time, either because they get updated or replaced. Claim allocations are done once based on whatever was set in classes at the time of allocation. Changing the spec automatically increments the metadata.generation number.

DeviceClassSpec v1alpha3 resource

Appears In:

DeviceClass [resource/v1alpha3]

Field	Description
`config` DeviceClassConfiguration array	Config defines configuration parameters that apply to each device that is claimed via this class. Some classses may potentially be satisfied by multiple drivers, so each instance of a vendor configuration applies to exactly one driver. They are passed to the driver, but are not considered while allocating the claim.
`selectors` DeviceSelector array	Each selector must be satisfied by a device which is claimed via this class.

DeviceClassList v1alpha3 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` DeviceClass array	Items is the list of resource classes.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a DeviceClass

HTTP Request

POST /apis/resource.k8s.io/v1alpha3/deviceclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DeviceClass

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created
202 DeviceClass	Accepted

Patch

partially update the specified DeviceClass

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha3/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created

Replace

replace the specified DeviceClass

HTTP Request

PUT /apis/resource.k8s.io/v1alpha3/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` DeviceClass

Response

Code	Description
200 DeviceClass	OK
201 DeviceClass	Created

Delete

delete a DeviceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 DeviceClass	OK
202 DeviceClass	Accepted

Delete Collection

delete collection of DeviceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/deviceclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified DeviceClass

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 DeviceClass	OK

List

list or watch objects of kind DeviceClass

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/deviceclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 DeviceClassList	OK

Watch

watch changes to an object of kind DeviceClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/deviceclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the DeviceClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of DeviceClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/deviceclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

DeviceClassConfiguration v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceClassConfiguration`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClassSpec [resource/v1alpha3]

Field	Description
`opaque` OpaqueDeviceConfiguration	Opaque provides driver-specific configuration parameters.

DeviceConstraint v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceConstraint`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClaim [resource/v1alpha3]

Field Description

DeviceRequest v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceRequest`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClaim [resource/v1alpha3]

Field	Description
`adminAccess` boolean	AdminAccess indicates that this is a claim for administrative access to the device(s). Claims with AdminAccess are expected to be used for monitoring or other management services for a device. They ignore all ordinary claims to the device with respect to access modes and any resource allocations. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.
`allocationMode` string	AllocationMode and its related fields define how devices are allocated to satisfy this request. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This request is for all of the matching devices in a pool. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AlloctionMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other requests must specify this field. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.
`count` integer	Count is used only when the count mode is "ExactCount". Must be greater than zero. If AllocationMode is ExactCount and this field is not specified, the default is one.
`deviceClassName` string	DeviceClassName references a specific DeviceClass, which can define additional configuration and selectors to be inherited by this request. A class is required. Which classes are available depends on the cluster. Administrators may use this to restrict which devices may get requested by only installing classes with selectors for permitted devices. If users are free to request anything without restrictions, then administrators can create an empty DeviceClass for users to reference.
`name` string	Name can be used to reference this request in a pod.spec.containers[].resources.claims entry and in a constraint of the claim. Must be a DNS label.
`selectors` DeviceSelector array	Selectors define criteria which must be satisfied by a specific device in order for that device to be considered for this request. All selectors must be satisfied for a device to be considered.

DeviceRequestAllocationResult v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceRequestAllocationResult`

Other API versions of this object exist: v1beta1

Appears In:

DeviceAllocationResult [resource/v1alpha3]

Field	Description
`adminAccess` boolean	AdminAccess indicates that this device was allocated for administrative access. See the corresponding request field for a definition of mode. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.
`device` string	Device references one device instance via its name in the driver's resource pool. It must be a DNS label.
`driver` string	Driver specifies the name of the DRA driver whose kubelet plugin should be invoked to process the allocation once the claim is needed on a node. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`pool` string	This name together with the driver name and the device name field identify which device was allocated (`<driver name>/<pool name>/<device name>`). Must not be longer than 253 characters and may contain one or more DNS sub-domains separated by slashes.
`request` string	Request is the name of the request in the claim which caused this device to be allocated. Multiple devices may have been allocated per request.

DeviceSelector v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`DeviceSelector`

Other API versions of this object exist: v1beta1

Appears In:

DeviceClassSpec [resource/v1alpha3]
DeviceRequest [resource/v1alpha3]

Field	Description
`cel` CELDeviceSelector	CEL contains a CEL expression for selecting a device.

EndpointPort v1 discovery.k8s.io

Group	Version	Kind
`discovery.k8s.io`	`v1`	`EndpointPort`

Appears In:

EndpointSlice [discovery/v1]

Field	Description
`appProtocol` string	The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
`name` string	name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
`port` integer	port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
`protocol` string	protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

Event v1 core

Group	Version	Kind
`core`	`v1`	`Event`

Appears In:

EventList [core/v1]

Field	Description
`action` string	What action was taken/failed regarding to the Regarding object.
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`count` integer	The number of times this event has occurred.
`eventTime` MicroTime	Time when this Event was first observed.
`firstTimestamp` Time	The time at which the event was first recorded. (Time of server receipt is in TypeMeta.)
`involvedObject` ObjectReference	The object that this event is about.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`lastTimestamp` Time	The time at which the most recent occurrence of this event was recorded.
`message` string	A human-readable description of the status of this operation.
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`reason` string	This should be a short, machine understandable string that gives the reason for the transition into the object's current status.
`related` ObjectReference	Optional secondary object for more complex actions.
`reportingComponent` string	Name of the controller that emitted this Event, e.g. `kubernetes.io/kubelet`.
`reportingInstance` string	ID of the controller instance, e.g. `kubelet-xyzf`.
`series` EventSeries	Data about the Event series this event represents or nil if it's a singleton Event.
`source` EventSource	The component reporting this event. Should be a short machine understandable string.
`type` string	Type of this event (Normal, Warning), new types could be added in the future

EventList v1 core

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` Event array	List of events
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create an Event

HTTP Request

POST /api/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Event

Response

Code	Description
200 Event	OK
201 Event	Created
202 Event	Accepted

Patch

partially update the specified Event

HTTP Request

PATCH /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 Event	OK
201 Event	Created

Replace

replace the specified Event

HTTP Request

PUT /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Event

Response

Code	Description
200 Event	OK
201 Event	Created

Delete

delete an Event

HTTP Request

DELETE /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of Event

HTTP Request

DELETE /api/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified Event

HTTP Request

GET /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 Event	OK

List

list or watch objects of kind Event

HTTP Request

GET /api/v1/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EventList	OK

List All Namespaces

list or watch objects of kind Event

HTTP Request

GET /api/v1/events

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 EventList	OK

Watch

watch changes to an object of kind Event. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/events/{name}

Path Parameters

Parameter	Description
`name`	name of the Event
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/events

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/events

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

EventSeries v1 core

Group	Version	Kind
`core`	`v1`	`EventSeries`

Appears In:

Event [core/v1]

Field	Description
`count` integer	Number of occurrences in this series up to the last heartbeat time
`lastObservedTime` MicroTime	Time of the last occurrence observed

ExpressionWarning v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`ExpressionWarning`

Other API versions of this object exist: v1

Appears In:

TypeChecking [admissionregistration/v1beta1]

Field	Description
`fieldRef` string	The path to the field that refers the expression. For example, the reference to the expression of the first item of validations is "spec.validations[0].expression"
`warning` string	The content of type checking information in a human-readable form. Each line of the warning contains the type that the expression is checked against, followed by the type check error from the compiler.

HorizontalPodAutoscaler v1 autoscaling

Group	Version	Kind
`autoscaling`	`v1`	`HorizontalPodAutoscaler`

Other API versions of this object exist: v2

Appears In:

HorizontalPodAutoscalerList [autoscaling/v1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`spec` HorizontalPodAutoscalerSpec	spec defines the behaviour of autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
`status` HorizontalPodAutoscalerStatus	status is the current information about the autoscaler.

HorizontalPodAutoscalerSpec v1 autoscaling

Appears In:

HorizontalPodAutoscaler [autoscaling/v1]

Field	Description
`maxReplicas` integer	maxReplicas is the upper limit for the number of pods that can be set by the autoscaler; cannot be smaller than MinReplicas.
`minReplicas` integer	minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down. It defaults to 1 pod. minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured. Scaling is active as long as at least one metric value is available.
`scaleTargetRef` CrossVersionObjectReference	reference to scaled resource; horizontal pod autoscaler will learn the current resource consumption and will set the desired number of pods by using its Scale subresource.
`targetCPUUtilizationPercentage` integer	targetCPUUtilizationPercentage is the target average CPU utilization (represented as a percentage of requested CPU) over all the pods; if not specified the default autoscaling policy will be used.

HorizontalPodAutoscalerStatus v1 autoscaling

Appears In:

HorizontalPodAutoscaler [autoscaling/v1]

Field	Description
`currentCPUUtilizationPercentage` integer	currentCPUUtilizationPercentage is the current average CPU utilization over all pods, represented as a percentage of requested CPU, e.g. 70 means that an average pod is using now 70% of its requested CPU.
`currentReplicas` integer	currentReplicas is the current number of replicas of pods managed by this autoscaler.
`desiredReplicas` integer	desiredReplicas is the desired number of replicas of pods managed by this autoscaler.
`lastScaleTime` Time	lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods; used by the autoscaler to control how often the number of pods is changed.
`observedGeneration` integer	observedGeneration is the most recent generation observed by this autoscaler.

HorizontalPodAutoscalerList v1 autoscaling

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` HorizontalPodAutoscaler array	items is the list of horizontal pod autoscaler objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata.

Write Operations

Create

create a HorizontalPodAutoscaler

HTTP Request

POST /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created
202 HorizontalPodAutoscaler	Accepted

Patch

partially update the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Replace

replace the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Delete

delete a HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 HorizontalPodAutoscaler	OK

List

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 HorizontalPodAutoscalerList	OK

List All Namespaces

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/horizontalpodautoscalers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 HorizontalPodAutoscalerList	OK

Watch

watch changes to an object of kind HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/autoscaling/v1/watch/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v1/watch/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v1/watch/horizontalpodautoscalers

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

Read Status

read status of the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 HorizontalPodAutoscaler	OK

Replace Status

replace status of the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

Parameter	Description
`name`	name of the HorizontalPodAutoscaler
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` HorizontalPodAutoscaler

Response

Code	Description
200 HorizontalPodAutoscaler	OK
201 HorizontalPodAutoscaler	Created

MatchCondition v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`MatchCondition`

Other API versions of this object exist: v1 v1alpha1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field Description

MatchCondition v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`MatchCondition`

Other API versions of this object exist: v1 v1beta1

Appears In:

MutatingAdmissionPolicySpec [admissionregistration/v1alpha1]

Field Description

MatchResources v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`MatchResources`

Other API versions of this object exist: v1 v1alpha1

Appears In:

ValidatingAdmissionPolicyBindingSpec [admissionregistration/v1beta1]
ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field	Description
`excludeResourceRules` NamedRuleWithOperations array	ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
`matchPolicy` string	matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
`namespaceSelector` LabelSelector	NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
`objectSelector` LabelSelector	ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
`resourceRules` NamedRuleWithOperations array	ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

MatchResources v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`MatchResources`

Other API versions of this object exist: v1 v1beta1

Appears In:

MutatingAdmissionPolicyBindingSpec [admissionregistration/v1alpha1]
MutatingAdmissionPolicySpec [admissionregistration/v1alpha1]

Field	Description
`excludeResourceRules` NamedRuleWithOperations array	ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
`matchPolicy` string	matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
`namespaceSelector` LabelSelector	NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
`objectSelector` LabelSelector	ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
`resourceRules` NamedRuleWithOperations array	ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

NamedRuleWithOperations v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`NamedRuleWithOperations`

Other API versions of this object exist: v1 v1alpha1

Appears In:

MatchResources [admissionregistration/v1beta1]

Field	Description
`apiGroups` string array	APIGroups is the API groups the resources belong to. '' is all groups. If '' is present, the length of the slice must be one. Required.
`apiVersions` string array	APIVersions is the API versions the resources belong to. '' is all versions. If '' is present, the length of the slice must be one. Required.
`operations` string array	Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
`resourceNames` string array	ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
`resources` string array	Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '' means all resources, but not subresources. 'pods/' means all subresources of pods. '/scale' means all scale subresources. '/*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
`scope` string	scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NamedRuleWithOperations v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`NamedRuleWithOperations`

Other API versions of this object exist: v1 v1beta1

Appears In:

MatchResources [admissionregistration/v1alpha1]

Field	Description
`apiGroups` string array	APIGroups is the API groups the resources belong to. '' is all groups. If '' is present, the length of the slice must be one. Required.
`apiVersions` string array	APIVersions is the API versions the resources belong to. '' is all versions. If '' is present, the length of the slice must be one. Required.
`operations` string array	Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
`resourceNames` string array	ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
`resources` string array	Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '' means all resources, but not subresources. 'pods/' means all subresources of pods. '/scale' means all scale subresources. '/*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
`scope` string	scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NetworkDeviceData v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`NetworkDeviceData`

Other API versions of this object exist: v1beta1

Appears In:

AllocatedDeviceStatus [resource/v1alpha3]

Field	Description
`hardwareAddress` string	HardwareAddress represents the hardware address (e.g. MAC Address) of the device's network interface. Must not be longer than 128 characters.
`interfaceName` string	InterfaceName specifies the name of the network interface associated with the allocated device. This might be the name of a physical or virtual network interface being configured in the pod. Must not be longer than 256 characters.
`ips` string array	IPs lists the network addresses assigned to the device's network interface. This can include both IPv4 and IPv6 addresses. The IPs are in the CIDR notation, which includes both the address and the associated subnet mask. e.g.: "192.0.2.5/24" for IPv4 and "2001:db8::5/64" for IPv6.

OpaqueDeviceConfiguration v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`OpaqueDeviceConfiguration`

Other API versions of this object exist: v1beta1

Appears In:

DeviceAllocationConfiguration [resource/v1alpha3]
DeviceClaimConfiguration [resource/v1alpha3]
DeviceClassConfiguration [resource/v1alpha3]

Field	Description
`driver` string	Driver is used to determine which kubelet plugin needs to be passed these configuration parameters. An admission policy provided by the driver developer could use this to decide whether it needs to validate them. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver.
`parameters`	Parameters can contain arbitrary data. It is the responsibility of the driver developer to handle validation and versioning. Typically this includes self-identification and a version ("kind" + "apiVersion" for Kubernetes types), with conversion between different versions. The length of the raw data must be smaller or equal to 10 Ki.

ParamKind v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`ParamKind`

Other API versions of this object exist: v1 v1alpha1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field	Description
`apiVersion` string	APIVersion is the API group version the resources belong to. In format of "group/version". Required.
`kind` string	Kind is the API kind the resources belong to. Required.

ParamKind v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`ParamKind`

Other API versions of this object exist: v1 v1beta1

Appears In:

MutatingAdmissionPolicySpec [admissionregistration/v1alpha1]

Field	Description
`apiVersion` string	APIVersion is the API group version the resources belong to. In format of "group/version". Required.
`kind` string	Kind is the API kind the resources belong to. Required.

ParamRef v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`ParamRef`

Other API versions of this object exist: v1 v1alpha1

Appears In:

ValidatingAdmissionPolicyBindingSpec [admissionregistration/v1beta1]

Field	Description
`name` string	name is the name of the resource being referenced. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset. A single parameter used for all admission requests can be configured by setting the `name` field, leaving `selector` blank, and setting namespace if `paramKind` is namespace-scoped.
`namespace` string	namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
`parameterNotFoundAction` string	`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Required
`selector` LabelSelector	selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

ParamRef v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`ParamRef`

Other API versions of this object exist: v1 v1beta1

Appears In:

MutatingAdmissionPolicyBindingSpec [admissionregistration/v1alpha1]

Field	Description
`name` string	`name` is the name of the resource being referenced. `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.
`namespace` string	namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
`parameterNotFoundAction` string	`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Default to `Deny`
`selector` LabelSelector	selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

ResourceClaim v1beta1 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1beta1`	`ResourceClaim`

Other API versions of this object exist: v1 v1alpha3

Appears In:

ResourceClaimList [resource/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceClaimSpec	Spec describes what is being requested and how to configure it. The spec is immutable.
`status` ResourceClaimStatus	Status describes whether the claim is ready to use and what has been allocated.

ResourceClaimSpec v1beta1 resource

Appears In:

ResourceClaim [resource/v1beta1]
ResourceClaimTemplateSpec [resource/v1beta1]

Field	Description
`devices` DeviceClaim	Devices defines how to request devices.

ResourceClaimStatus v1beta1 resource

Appears In:

ResourceClaim [resource/v1beta1]

Field	Description
`allocation` AllocationResult	Allocation is set once the claim has been allocated successfully.
`devices` AllocatedDeviceStatus array	Devices contains the status of each device allocated for this claim, as reported by the driver. This can include driver-specific information. Entries are owned by their respective drivers.
`reservedFor` ResourceClaimConsumerReference array patch strategy: merge patch merge key: uid	ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. A claim that is in use or might be in use because it has been reserved must not get deallocated. In a cluster with multiple scheduler instances, two pods might get scheduled concurrently by different schedulers. When they reference the same ResourceClaim which already has reached its maximum number of consumers, only one pod can be scheduled. Both schedulers try to add their pod to the claim.status.reservedFor field, but only the update that reaches the API server first gets stored. The other one fails with an error and the scheduler which issued it knows that it must put the pod back into the queue, waiting for the ResourceClaim to become usable again. There can be at most 32 such reservations. This may get increased in the future, but not reduced.

ResourceClaimList v1beta1 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceClaim array	Items is the list of resource claims.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceClaim

HTTP Request

POST /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created
202 ResourceClaim	Accepted

Patch

partially update the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Replace

replace the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Delete

delete a ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceClaim	OK
202 ResourceClaim	Accepted

Delete Collection

delete collection of ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

List

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

List All Namespaces

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

Watch

watch changes to an object of kind ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1beta1/watch/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Read Status

read status of the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

Replace Status

replace status of the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1beta1/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

ResourceClaim v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`ResourceClaim`

Other API versions of this object exist: v1 v1beta1

Appears In:

ResourceClaimList [resource/v1alpha3]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceClaimSpec	Spec describes what is being requested and how to configure it. The spec is immutable.
`status` ResourceClaimStatus	Status describes whether the claim is ready to use and what has been allocated.

ResourceClaimSpec v1alpha3 resource

Appears In:

ResourceClaim [resource/v1alpha3]
ResourceClaimTemplateSpec [resource/v1alpha3]

Field	Description
`devices` DeviceClaim	Devices defines how to request devices.

ResourceClaimStatus v1alpha3 resource

Appears In:

ResourceClaim [resource/v1alpha3]

Field	Description
`allocation` AllocationResult	Allocation is set once the claim has been allocated successfully.
`devices` AllocatedDeviceStatus array	Devices contains the status of each device allocated for this claim, as reported by the driver. This can include driver-specific information. Entries are owned by their respective drivers.
`reservedFor` ResourceClaimConsumerReference array patch strategy: merge patch merge key: uid	ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. A claim that is in use or might be in use because it has been reserved must not get deallocated. In a cluster with multiple scheduler instances, two pods might get scheduled concurrently by different schedulers. When they reference the same ResourceClaim which already has reached its maximum number of consumers, only one pod can be scheduled. Both schedulers try to add their pod to the claim.status.reservedFor field, but only the update that reaches the API server first gets stored. The other one fails with an error and the scheduler which issued it knows that it must put the pod back into the queue, waiting for the ResourceClaim to become usable again. There can be at most 32 such reservations. This may get increased in the future, but not reduced.

ResourceClaimList v1alpha3 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceClaim array	Items is the list of resource claims.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceClaim

HTTP Request

POST /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created
202 ResourceClaim	Accepted

Patch

partially update the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Replace

replace the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Delete

delete a ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceClaim	OK
202 ResourceClaim	Accepted

Delete Collection

delete collection of ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

List

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

List All Namespaces

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimList	OK

Watch

watch changes to an object of kind ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/namespaces/{namespace}/resourceclaims

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/resourceclaims

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

Read Status

read status of the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaim	OK

Replace Status

replace status of the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ResourceClaim
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaim

Response

Code	Description
200 ResourceClaim	OK
201 ResourceClaim	Created

ResourceClaimConsumerReference v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`ResourceClaimConsumerReference`

Other API versions of this object exist: v1beta1

Appears In:

ResourceClaimStatus [resource/v1alpha3]

Field	Description
`apiGroup` string	APIGroup is the group for the resource being referenced. It is empty for the core API. This matches the group in the APIVersion that is used when creating the resources.
`name` string	Name is the name of resource being referenced.
`resource` string	Resource is the type of resource being referenced, for example "pods".
`uid` string	UID identifies exactly one incarnation of the resource.

ResourceClaimTemplate v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`ResourceClaimTemplate`

Other API versions of this object exist: v1beta1

Appears In:

ResourceClaimTemplateList [resource/v1alpha3]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceClaimTemplateSpec	Describes the ResourceClaim that is to be generated. This field is immutable. A ResourceClaim will get created by the control plane for a Pod when needed and then not get updated anymore.

ResourceClaimTemplateSpec v1alpha3 resource

Appears In:

ResourceClaimTemplate [resource/v1alpha3]

Field	Description
`metadata` ObjectMeta	ObjectMeta may contain labels and annotations that will be copied into the ResourceClaim when creating it. No other fields are allowed and will be rejected during validation.
`spec` ResourceClaimSpec	Spec for the ResourceClaim. The entire content is copied unchanged into the ResourceClaim that gets created from this template. The same fields as in a ResourceClaim are also valid here.

ResourceClaimTemplateList v1alpha3 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceClaimTemplate array	Items is the list of resource claim templates.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceClaimTemplate

HTTP Request

POST /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaimTemplate

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created
202 ResourceClaimTemplate	Accepted

Patch

partially update the specified ResourceClaimTemplate

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created

Replace

replace the specified ResourceClaimTemplate

HTTP Request

PUT /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceClaimTemplate

Response

Code	Description
200 ResourceClaimTemplate	OK
201 ResourceClaimTemplate	Created

Delete

delete a ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceClaimTemplate	OK
202 ResourceClaimTemplate	Accepted

Delete Collection

delete collection of ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceClaimTemplate	OK

List

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimTemplateList	OK

List All Namespaces

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/resourceclaimtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceClaimTemplateList	OK

Watch

watch changes to an object of kind ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceClaimTemplate
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

Parameter	Description
`namespace`	object name and auth scope, such as for teams and projects

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/resourceclaimtemplates

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

ResourcePool v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`ResourcePool`

Other API versions of this object exist: v1beta1

Appears In:

ResourceSliceSpec [resource/v1alpha3]

Field	Description
`generation` integer	Generation tracks the change in a pool over time. Whenever a driver changes something about one or more of the resources in a pool, it must change the generation in all ResourceSlices which are part of that pool. Consumers of ResourceSlices should only consider resources from the pool with the highest generation number. The generation may be reset by drivers, which should be fine for consumers, assuming that all ResourceSlices in a pool are updated to match or deleted. Combined with ResourceSliceCount, this mechanism enables consumers to detect pools which are comprised of multiple ResourceSlices and are in an incomplete state.
`name` string	Name is used to identify the pool. For node-local devices, this is often the node name, but this is not required. It must not be longer than 253 characters and must consist of one or more DNS sub-domains separated by slashes. This field is immutable.
`resourceSliceCount` integer	ResourceSliceCount is the total number of ResourceSlices in the pool at this generation number. Must be greater than zero. Consumers can use this to check whether they have seen all ResourceSlices belonging to the same pool.

ResourceSlice v1alpha3 resource.k8s.io

Group	Version	Kind
`resource.k8s.io`	`v1alpha3`	`ResourceSlice`

Other API versions of this object exist: v1beta1

Appears In:

ResourceSliceList [resource/v1alpha3]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata
`spec` ResourceSliceSpec	Contains the information published by the driver. Changing the spec automatically increments the metadata.generation number.

ResourceSliceSpec v1alpha3 resource

Appears In:

ResourceSlice [resource/v1alpha3]

Field	Description
`allNodes` boolean	AllNodes indicates that all nodes have access to the resources in the pool. Exactly one of NodeName, NodeSelector and AllNodes must be set.
`devices` Device array	Devices lists some or all of the devices in this pool. Must not have more than 128 entries.
`driver` string	Driver identifies the DRA driver providing the capacity information. A field selector can be used to list only ResourceSlice objects with a certain driver name. Must be a DNS subdomain and should end with a DNS domain owned by the vendor of the driver. This field is immutable.
`nodeName` string	NodeName identifies the node which provides the resources in this pool. A field selector can be used to list only ResourceSlice objects belonging to a certain node. This field can be used to limit access from nodes to ResourceSlices with the same node name. It also indicates to autoscalers that adding new nodes of the same type as some old node might also make new resources available. Exactly one of NodeName, NodeSelector and AllNodes must be set. This field is immutable.
`nodeSelector` NodeSelector	NodeSelector defines which nodes have access to the resources in the pool, when that pool is not limited to a single node. Must use exactly one term. Exactly one of NodeName, NodeSelector and AllNodes must be set.
`pool` ResourcePool	Pool describes the pool that this ResourceSlice belongs to.

ResourceSliceList v1alpha3 resource

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ResourceSlice array	Items is the list of resource ResourceSlices.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata

Write Operations

Create

create a ResourceSlice

HTTP Request

POST /apis/resource.k8s.io/v1alpha3/resourceslices

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceSlice

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created
202 ResourceSlice	Accepted

Patch

partially update the specified ResourceSlice

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha3/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created

Replace

replace the specified ResourceSlice

HTTP Request

PUT /apis/resource.k8s.io/v1alpha3/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ResourceSlice

Response

Code	Description
200 ResourceSlice	OK
201 ResourceSlice	Created

Delete

delete a ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 ResourceSlice	OK
202 ResourceSlice	Accepted

Delete Collection

delete collection of ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha3/resourceslices

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ResourceSlice	OK

List

list or watch objects of kind ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/resourceslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ResourceSliceList	OK

Watch

watch changes to an object of kind ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/resourceslices/{name}

Path Parameters

Parameter	Description
`name`	name of the ResourceSlice

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha3/watch/resourceslices

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

SelfSubjectReview v1beta1 authentication.k8s.io

Group	Version	Kind
`authentication.k8s.io`	`v1beta1`	`SelfSubjectReview`

Other API versions of this object exist: v1

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`status` SelfSubjectReviewStatus	Status is filled in by the server with the user attributes.

SelfSubjectReviewStatus v1beta1 authentication

Appears In:

SelfSubjectReview [authentication/v1beta1]

Field	Description
`userInfo` UserInfo	User attributes of the user making this request.

Write Operations

Create

create a SelfSubjectReview

HTTP Request

POST /apis/authentication.k8s.io/v1beta1/selfsubjectreviews

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` SelfSubjectReview

Response

Code	Description
200 SelfSubjectReview	OK
201 SelfSubjectReview	Created
202 SelfSubjectReview	Accepted

ServiceReference v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`ServiceReference`

Appears In:

WebhookClientConfig [apiextensions/v1]

Field	Description
`name` string	name is the name of the service. Required
`namespace` string	namespace is the namespace of the service. Required
`path` string	path is an optional URL path at which the webhook will be contacted.
`port` integer	port is an optional service port at which the webhook will be contacted. `port` should be a valid port number (1-65535, inclusive). Defaults to 443 for backward compatibility.

ServiceReference v1 apiregistration.k8s.io

Group	Version	Kind
`apiregistration.k8s.io`	`v1`	`ServiceReference`

Appears In:

APIServiceSpec [apiregistration/v1]

Field	Description
`name` string	Name is the name of the service
`namespace` string	Namespace is the namespace of the service
`port` integer	If specified, the port on the service that hosting webhook. Default to 443 for backward compatibility. `port` should be a valid port number (1-65535, inclusive).

Subject v1 rbac.authorization.k8s.io

Group	Version	Kind
`rbac.authorization.k8s.io`	`v1`	`Subject`

Appears In:

ClusterRoleBinding [rbac/v1]
RoleBinding [rbac/v1]

Field	Description
`apiGroup` string	APIGroup holds the API group of the referenced subject. Defaults to "" for ServiceAccount subjects. Defaults to "rbac.authorization.k8s.io" for User and Group subjects.
`kind` string	Kind of object being referenced. Values defined by this API group are "User", "Group", and "ServiceAccount". If the Authorizer does not recognized the kind value, the Authorizer should report an error.
`name` string	Name of the object being referenced.
`namespace` string	Namespace of the referenced object. If the object kind is non-namespace, such as "User" or "Group", and this value is not empty the Authorizer should report an error.

TokenRequest v1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1`	`TokenRequest`

Appears In:

CSIDriverSpec [storage/v1]

Field	Description
`audience` string	audience is the intended audience of the token in "TokenRequestSpec". It will default to the audiences of kube apiserver.
`expirationSeconds` integer	expirationSeconds is the duration of validity of the token in "TokenRequestSpec". It has the same default value of "ExpirationSeconds" in "TokenRequestSpec".

TypeChecking v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`TypeChecking`

Other API versions of this object exist: v1

Appears In:

ValidatingAdmissionPolicyStatus [admissionregistration/v1beta1]

Field	Description
`expressionWarnings` ExpressionWarning array	The type checking warnings for each expression.

ValidatingAdmissionPolicy v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`ValidatingAdmissionPolicy`

Other API versions of this object exist: v1

Appears In:

ValidatingAdmissionPolicyList [admissionregistration/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` ValidatingAdmissionPolicySpec	Specification of the desired behavior of the ValidatingAdmissionPolicy.
`status` ValidatingAdmissionPolicyStatus	The status of the ValidatingAdmissionPolicy, including warnings that are useful to determine if the policy behaves in the expected way. Populated by the system. Read-only.

ValidatingAdmissionPolicySpec v1beta1 admissionregistration

Appears In:

ValidatingAdmissionPolicy [admissionregistration/v1beta1]

Field	Description
`auditAnnotations` AuditAnnotation array	auditAnnotations contains CEL expressions which are used to produce audit annotations for the audit event of the API request. validations and auditAnnotations may not both be empty; a least one of validations or auditAnnotations is required.
`failurePolicy` string	failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.
`matchConditions` MatchCondition array patch strategy: merge patch merge key: name	MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
`matchConstraints` MatchResources	MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.
`paramKind` ParamKind	ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
`validations` Validation array	Validations contain CEL expressions which is used to apply the validation. Validations and AuditAnnotations may not both be empty; a minimum of one Validations or AuditAnnotations is required.
`variables` Variable array patch strategy: merge patch merge key: name	Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.

ValidatingAdmissionPolicyStatus v1beta1 admissionregistration

Appears In:

ValidatingAdmissionPolicy [admissionregistration/v1beta1]

Field	Description
`conditions` Condition array	The conditions represent the latest available observations of a policy's current state.
`observedGeneration` integer	The generation observed by the controller.
`typeChecking` TypeChecking	The results of type checking for each expression. Presence of this field indicates the completion of the type checking.

ValidatingAdmissionPolicyList v1beta1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ValidatingAdmissionPolicy array	List of ValidatingAdmissionPolicy.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created
202 ValidatingAdmissionPolicy	Accepted

Patch

partially update the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Replace

replace the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Delete

delete a ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicy	OK

List

list or watch objects of kind ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ValidatingAdmissionPolicyList	OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicies/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicies

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Status Operations

Patch Status

partially update status of the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

Read Status

read status of the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicy	OK

Replace Status

replace status of the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicy

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicy

Response

Code	Description
200 ValidatingAdmissionPolicy	OK
201 ValidatingAdmissionPolicy	Created

ValidatingAdmissionPolicyBinding v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`ValidatingAdmissionPolicyBinding`

Other API versions of this object exist: v1

Appears In:

ValidatingAdmissionPolicyBindingList [admissionregistration/v1beta1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
`spec` ValidatingAdmissionPolicyBindingSpec	Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.

ValidatingAdmissionPolicyBindingSpec v1beta1 admissionregistration

Appears In:

ValidatingAdmissionPolicyBinding [admissionregistration/v1beta1]

Field	Description
`matchResources` MatchResources	MatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
`paramRef` ParamRef	paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
`policyName` string	PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.
`validationActions` string array	validationActions declares how Validations of the referenced ValidatingAdmissionPolicy are enforced. If a validation evaluates to false it is always enforced according to these actions. Failures defined by the ValidatingAdmissionPolicy's FailurePolicy are enforced according to these actions only if the FailurePolicy is set to Fail, otherwise the failures are ignored. This includes compilation errors, runtime errors and misconfigurations of the policy. validationActions is declared as a set of action values. Order does not matter. validationActions may not contain duplicates of the same action. The supported actions values are: "Deny" specifies that a validation failure results in a denied request. "Warn" specifies that a validation failure is reported to the request client in HTTP Warning headers, with a warning code of 299. Warnings can be sent both for allowed or denied admission responses. "Audit" specifies that a validation failure is included in the published audit event for the request. The audit event will contain a `validation.policy.admission.k8s.io/validation_failure` audit annotation with a value containing the details of the validation failures, formatted as a JSON list of objects, each with the following fields: - message: The validation failure message string - policy: The resource name of the ValidatingAdmissionPolicy - binding: The resource name of the ValidatingAdmissionPolicyBinding - expressionIndex: The index of the failed validations in the ValidatingAdmissionPolicy - validationActions: The enforcement actions enacted for the validation failure Example audit annotation: `"validation.policy.admission.k8s.io/validation_failure": "[{\"message\": \"Invalid value\", {\"policy\": \"policy.example.com\", {\"binding\": \"policybinding.example.com\", {\"expressionIndex\": \"1\", {\"validationActions\": [\"Audit\"]}]"` Clients should expect to handle additional values by ignoring any values not recognized. "Deny" and "Warn" may not be used together since this combination needlessly duplicates the validation failure both in the API response body and the HTTP warning headers. Required.

ValidatingAdmissionPolicyBindingList v1beta1 admissionregistration

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` ValidatingAdmissionPolicyBinding array	List of PolicyBinding.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicyBinding

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created
202 ValidatingAdmissionPolicyBinding	Accepted

Patch

partially update the specified ValidatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created

Replace

replace the specified ValidatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` ValidatingAdmissionPolicyBinding

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK
201 ValidatingAdmissionPolicyBinding	Created

Delete

delete a ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK
202 Status	Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 ValidatingAdmissionPolicyBinding	OK

List

list or watch objects of kind ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 ValidatingAdmissionPolicyBindingList	OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicybindings/{name}

Path Parameters

Parameter	Description
`name`	name of the ValidatingAdmissionPolicyBinding

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicybindings

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Validation v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`Validation`

Other API versions of this object exist: v1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field	Description
`expression` string	Expression represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec CEL expressions have access to the contents of the API request/response, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"} - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"} - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"} Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. Required.
`message` string	Message represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".
`messageExpression` string	messageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a validation, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the `expression` except for 'authorizer' and 'authorizer.requestResource'. Example: "object.x must be less than max ("+string(params.max)+")"
`reason` string	Reason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.

Variable v1beta1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1beta1`	`Variable`

Other API versions of this object exist: v1 v1alpha1

Appears In:

ValidatingAdmissionPolicySpec [admissionregistration/v1beta1]

Field	Description
`expression` string	Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
`name` string	Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

Variable v1alpha1 admissionregistration.k8s.io

Group	Version	Kind
`admissionregistration.k8s.io`	`v1alpha1`	`Variable`

Other API versions of this object exist: v1 v1beta1

Appears In:

MutatingAdmissionPolicySpec [admissionregistration/v1alpha1]

Field	Description
`expression` string	Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
`name` string	Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

VolumeAttributesClass v1alpha1 storage.k8s.io

Group	Version	Kind
`storage.k8s.io`	`v1alpha1`	`VolumeAttributesClass`

Other API versions of this object exist: v1beta1

Appears In:

VolumeAttributesClassList [storage/v1alpha1]

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`driverName` string	Name of the CSI driver This field is immutable.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ObjectMeta	Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
`parameters` object	parameters hold volume attributes defined by the CSI driver. These values are opaque to the Kubernetes and are passed directly to the CSI driver. The underlying storage provider supports changing these attributes on an existing volume, however the parameters field itself is immutable. To invoke a volume update, a new VolumeAttributesClass should be created with new parameters, and the PersistentVolumeClaim should be updated to reference the new VolumeAttributesClass. This field is required and must contain at least one key/value pair. The keys cannot be empty, and the maximum number of parameters is 512, with a cumulative max size of 256K. If the CSI driver rejects invalid parameters, the target PersistentVolumeClaim will be set to an "Infeasible" state in the modifyVolumeStatus field.

VolumeAttributesClassList v1alpha1 storage

Field	Description
`apiVersion` string	APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
`items` VolumeAttributesClass array	items is the list of VolumeAttributesClass objects.
`kind` string	Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
`metadata` ListMeta	Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a VolumeAttributesClass

HTTP Request

POST /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttributesClass

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created
202 VolumeAttributesClass	Accepted

Patch

partially update the specified VolumeAttributesClass

HTTP Request

PATCH /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`force`	Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` Patch

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created

Replace

replace the specified VolumeAttributesClass

HTTP Request

PUT /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldManager`	fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
`fieldValidation`	fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

Parameter	Description
`body` VolumeAttributesClass

Response

Code	Description
200 VolumeAttributesClass	OK
201 VolumeAttributesClass	Created

Delete

delete a VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 VolumeAttributesClass	OK
202 VolumeAttributesClass	Accepted

Delete Collection

delete collection of VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

Parameter	Description
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`dryRun`	When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`gracePeriodSeconds`	The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
`ignoreStoreReadErrorWithClusterBreakingPotential`	if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable it
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`orphanDependents`	Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`propagationPolicy`	Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

Parameter	Description
`body` DeleteOptions

Response

Code	Description
200 Status	OK

Read Operations

Read

read the specified VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

Code	Description
200 VolumeAttributesClass	OK

List

list or watch objects of kind VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 VolumeAttributesClassList	OK

Watch

watch changes to an object of kind VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/watch/volumeattributesclasses/{name}

Path Parameters

Parameter	Description
`name`	name of the VolumeAttributesClass

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

Watch List

watch individual changes to a list of VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/watch/volumeattributesclasses

Query Parameters

Parameter	Description
`allowWatchBookmarks`	allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
`continue`	The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
`fieldSelector`	A selector to restrict the list of returned objects by their fields. Defaults to everything.
`labelSelector`	A selector to restrict the list of returned objects by their labels. Defaults to everything.
`limit`	limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
`pretty`	If 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
`resourceVersion`	resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`resourceVersionMatch`	resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
`sendInitialEvents`	`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
`timeoutSeconds`	Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
`watch`	Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

Code	Description
200 WatchEvent	OK

WebhookClientConfig v1 apiextensions.k8s.io

Group	Version	Kind
`apiextensions.k8s.io`	`v1`	`WebhookClientConfig`

Appears In:

WebhookConversion [apiextensions/v1]

Field	Description
`caBundle` string	caBundle is a PEM encoded CA bundle which will be used to validate the webhook's server certificate. If unspecified, system trust roots on the apiserver are used.
`service` ServiceReference	service is a reference to the service for this webhook. Either service or url must be specified. If the webhook is running within the cluster, then you should use `service`.
`url` string	url gives the location of the webhook, in standard URL form (`scheme://host:port/path`). Exactly one of `url` or `service` must be specified. The `host` should not refer to a service running in the cluster; use the `service` field instead. The host might be resolved via external DNS in some apiservers (e.g., `kube-apiserver` cannot resolve in-cluster DNS as that would be a layering violation). `host` may also be an IP address. Please note that using `localhost` or `127.0.0.1` as a `host` is risky unless you take great care to run this webhook on all hosts which run an apiserver which might need to make calls to this webhook. Such installs are likely to be non-portable, i.e., not easy to turn up in a new cluster. The scheme must be "https"; the URL must begin with "https://". A path is optional, and if present may be any string permissible in a URL. You may use the path to pass an arbitrary string to the webhook, for example, a cluster identifier. Attempting to use a user or basic auth e.g. "user:password@" is not allowed. Fragments ("#...") and query parameters ("?...") are not allowed, either.